The Honeywell FS-CPCHAS-0003 is the Safety Manager controller processor chassis. Honeywell specifies a 4 HE, 19-inch construction measuring 177 x 482.6 x 280 mm and weighing 5.8 kg, with 0.05 A consumption on each of the 5V-1, 5V-2 and 5V-R rails.
- Standard 19-inch rack format
- Dedicated Safety Manager processor mounting
- Published power-rail loads
- Documented controller/I/O chassis interconnection
It handles Internal chassis backplane power and controller data; field I/O signals remain on the matched I/O chassis and termination hardware. The documented compatible components are Safety Manager processor modules and the documented FC-PDB-IO05 / FC-IOCHAS-0003R / FC-IOCHAS-0003S arrangement where applicable.
Important Notice: Confirm chassis revision, controller generation and current Safety Manager support notes.
Apter Power FS-CPCHAS-0003 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the cited Honeywell manufacturer information. Confirm the complete physical nameplate and current controlled Honeywell documents before installation or replacement.
Safety instrumented systemsMechanically supports the controller processor hardware
Emergency shutdown panelsDistributes internal backplane power and data
Fire and gas safety cabinetsProvides the defined connection point to the Safety Manager I/O chassis arrangement
System Function 1Mechanically supports the controller processor hardware
System Function 2Distributes internal backplane power and data
Read and follow Honeywell Safety Manager Hardware Reference EP-SM.MAN.6284 and the applicable Honeywell installation instructions before use. Verify the exact complete ordering code from the physical nameplate.
1Support the 5.8 kg chassis during rack work.
2Verify 4 HE clearance and rack fasteners.
3Isolate all 5 V rails and cabinet power.
4Use the documented chassis interconnect cables.
5Complete controller and I/O diagnostics before service.
Videos
News
Applications
