What exact Honeywell system position is intended for FC-SDOL-0424?

FC-SDOL-0424 is assigned to the documented Honeywell Safety Manager role as high-current safe digital output module; confirm that role against the installed cabinet record.

Which field signal or controlled function is handled by FC-SDOL-0424?

Its documented signal duty is four protected high-current 24 v dc safety-related source outputs. The controlling source lists output type as 24 V DC solid-state source.

Which companion hardware must be checked before installing FC-SDOL-0424?

Match FC-SDOL-0424 with Safety Manager I/O chassis and 24 V DC external field supply; also retain the approved carrier, cable and project identity.

What electrical limit should an engineer verify before wiring FC-SDOL-0424?

Verify the model-specific value for Maximum channel current: 1 A. Do not transfer a limit from another module revision.

How should the installed configuration be preserved when replacing FC-SDOL-0424?

Record the as-found slot, connector, channel assignment and project revision, then restore only the approved Honeywell Safety Manager configuration.

Which isolation or handling check applies to FC-SDOL-0424?

Apply the isolation and ESD sequence stated for FC-SDOL-0424; the source also identifies maximum load inductance as 0.5 H.

What diagnostic or commissioning evidence is required for FC-SDOL-0424?

Complete the model-specific functional check for large shutdown-solenoid actuation, review host diagnostics and retain the final test result.

Can FC-SDOL-0424 be substituted for a visually similar Honeywell assembly?

No automatic substitution is assumed. Compare the complete FC-SDOL-0424 marking, output channels, companion hardware, signal duty and approved system revision.

FC-SDOL-0424 Honeywell High-Current Safe Digital Output Module

Name: FC-SDOL-0424
Brand: Honeywell
SKU: FC-SDOL-0424

FC-SDOL-0424

High-Current Safe Digital Output Module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for FC-SDOL-0424

Manufacturer:

Honeywell

Product Category:

DCS System

Spare Part Number:

FC-SDOL-0424

Estimated shipping dimensions:

2,2x19x12.7cm

Weight:

0.12 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Output channels:

Output type:

24 V DC solid-state source

Output protection:

Short-circuit proof

Maximum channel current:

1 A

Maximum total current:

3.6 A

Maximum load inductance:

0.5 H

Maximum load capacitance:

1 uF

Voltage drop:

<1.3 V at 1 A

Off-state current:

<0.1 mA

Current-sense voltage drop:

<1 V at 1 A

Overload threshold:

>10 Ohm

Lamp threshold:

>20 Ohm

5 V DC current:

15 mA

24 V DC internal current:

50 mA

24 V DC external current:

15 mA unloaded

Watchdog current:

4 mA

Module size:

4TE, 3HE (4HP, 3U)

Approvals:

CE, TUV, UL, CSA, FM

Information

Overview Manuals Common Applications Product Precautions

Honeywell FC-SDOL-0424 is a high-current safe digital output module for Safety Manager I/O. It switches four protected 24 V DC output channels for demanding safety-related final elements.

Drives four high-current safe output channels
Supplies up to 1 A on an individual channel
Limits combined module output current to 3.6 A
Supports inductive loads up to the published 0.5 H limit

FC-SDOL-0424 is installed in the Safety Manager I/O chassis with internal and external 24 V DC supplies, validated safety logic and documented high-current final elements.

Its engineered duties include shutdown-solenoid actuation, safety-contactor control, inductive trip-load switching and like-for-like renewal of an approved high-current output position.

Important Notice: Confirm the complete FC-SDOL-0424 marking, assigned I/O position, load current, field supply and safe-state behavior before installation; after commissioning, retain the current-sense and final-element proof-test results.

Apter Power FC-SDOL-0424 Manuals and Guides

Apter Power FC-SDOL-0424 High-Current Safe Output Technical Reference PDF FC-SDOL-0424 Load, Wiring and Functional Acceptance Workbook PDF

The first document provides the model-specific technical and system reference. The second is a distinct field workbook for load review, installation, connection checks, commissioning and acceptance records.

Shutdown-solenoid actuation

Controls documented high-current 24 V DC trip solenoids in a Safety Manager shutdown function.

Safety-contactor control

Switches approved contactor coils while retaining the engineered safe-output assignment.

Inductive trip-load switching

Operates inductive safety loads within the published channel and module limits.

High-current output renewal

Replaces an installed FC-SDOL-0424 position while preserving project identity and proof-test evidence.

Read the applicable Honeywell Safety Manager instructions before work. Verify FC-SDOL-0424, both 24 V DC supplies and the installed high-current safe-output configuration.

Verify the complete FC-SDOL-0424 marking and its assigned four-channel high-current safe-output position before work.

Place the connected process and control strategy in the approved maintenance state.

Isolate the applicable cabinet supply and 24 V high-current output field energy before disconnecting conductors.

Record terminal numbers, channel assignments, polarity, shields and configured ranges before removal.

Use ESD controls and protect the backplane connector, terminal hardware and coated electronics.

Confirm the installed Safety Manager I/O chassis and carrier arrangement against the approved project.

Restore power in a controlled sequence and clear only diagnostics created by the maintenance activity.

Complete a current-sense and final-element proof test on every active channel and retain the measured result before returning the channel to automatic service.

FAQS

What exact Honeywell system position is intended for FC-SDOL-0424?

FC-SDOL-0424 is assigned to the documented Honeywell Safety Manager role as high-current safe digital output module; confirm that role against the installed cabinet record.
Which field signal or controlled function is handled by FC-SDOL-0424?

Its documented signal duty is four protected high-current 24 v dc safety-related source outputs. The controlling source lists output type as 24 V DC solid-state source.
Which companion hardware must be checked before installing FC-SDOL-0424?

Match FC-SDOL-0424 with Safety Manager I/O chassis and 24 V DC external field supply; also retain the approved carrier, cable and project identity.
What electrical limit should an engineer verify before wiring FC-SDOL-0424?

Verify the model-specific value for Maximum channel current: 1 A. Do not transfer a limit from another module revision.
How should the installed configuration be preserved when replacing FC-SDOL-0424?

Record the as-found slot, connector, channel assignment and project revision, then restore only the approved Honeywell Safety Manager configuration.
Which isolation or handling check applies to FC-SDOL-0424?

Apply the isolation and ESD sequence stated for FC-SDOL-0424; the source also identifies maximum load inductance as 0.5 H.
What diagnostic or commissioning evidence is required for FC-SDOL-0424?

Complete the model-specific functional check for large shutdown-solenoid actuation, review host diagnostics and retain the final test result.
Can FC-SDOL-0424 be substituted for a visually similar Honeywell assembly?

No automatic substitution is assumed. Compare the complete FC-SDOL-0424 marking, output channels, companion hardware, signal duty and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

FC-SDOL-0424

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for FC-SDOL-0424

Technical specifications for FC-SDOL-0424

Information

Information