What exact Honeywell system position is intended for FC-SAI-1620M?

FC-SAI-1620M is assigned to the documented Honeywell Safety Manager role as safe analog input module; confirm that role against the installed cabinet record.

Which field signal or controlled function is handled by FC-SAI-1620M?

Its documented signal duty is sixteen 0 to 4.1 v safety-related analog-input signals. The controlling source lists input range as 0 to 4.1 V.

Which companion hardware must be checked before installing FC-SAI-1620M?

Match FC-SAI-1620M with Safety Manager I/O chassis and conditioned analog safety transmitters; also retain the approved carrier, cable and project identity.

What electrical limit should an engineer verify before wiring FC-SAI-1620M?

Verify the model-specific value for Maximum load capacitance: 100 nF. Do not transfer a limit from another module revision.

How should the installed configuration be preserved when replacing FC-SAI-1620M?

Record the as-found slot, connector, channel assignment and project revision, then restore only the approved Honeywell Safety Manager configuration.

Which isolation or handling check applies to FC-SAI-1620M?

Apply the isolation and ESD sequence stated for FC-SAI-1620M; the source also identifies adc inaccuracy as +/-1 LSB.

What diagnostic or commissioning evidence is required for FC-SAI-1620M?

Complete the model-specific functional check for analog trip-threshold monitoring, review host diagnostics and retain the final test result.

Can FC-SAI-1620M be substituted for a visually similar Honeywell assembly?

No automatic substitution is assumed. Compare the complete FC-SAI-1620M marking, input channels, companion hardware, signal duty and approved system revision.

Honeywell FC-SAI-1620M Safe Analog Input Module

Name: FC-SAI-1620M
Brand: Honeywell
SKU: FC-SAI-1620M

FC-SAI-1620M

Safe Analog Input Module

In Stock

Ships by Monday, September 21

Fast Shipping Available

Technical specifications for FC-SAI-1620M

Manufacturer:

Honeywell

Product Category:

Machinery Monitoring System

Spare Part Number:

FC-SAI-1620M

Estimated shipping dimensions:

1,2x19x12.8cm

Weight:

0.14 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Input channels:

Input range:

0 to 4.1 V

Input impedance:

>1 MOhm

Maximum load capacitance:

100 nF

A/D resolution:

12 bit

ADC inaccuracy:

+/-1 LSB

Module inaccuracy:

<0.25%

Absolute maximum input:

+/-36 V DC

Crosstalk:

>60 dB

External readback range:

0 to 4.1 V

External readback impedance:

1 MOhm typical

5 V DC current:

35 mA

24 V DC current:

35 mA

Module size:

4TE, 3HE (4HP, 3U)

Approvals:

CE, TUV, UL, CSA, FM

Information

Overview Manuals Common Applications Product Precautions

Honeywell FC-SAI-1620M is safe analog input module. It digitizes sixteen safety-related analog voltage inputs for monitoring and protective logic in a Safety Manager system.

Acquires sixteen safe analog input channels
Measures within the documented zero-to-4.1-volt range
Converts each channel with twelve-bit resolution
Provides external readback for controlled verification

FC-SAI-1620M operates with Safety Manager I/O chassis, conditioned analog safety transmitters, 24 V DC module supply, validated safety application.

Engineered applications include Analog trip-threshold monitoring, Safety transmitter acquisition, Process protection measurement, Safe analog-input renewal.

Important Notice: Record channel scaling and trip thresholds, isolate transmitter loops and prove input accuracy, readback and trip behavior under the approved safety test procedure.

Apter Power FC-SAI-1620M Manuals and Guides

Apter Power FC-SAI-1620M Product and System Technical Reference PDF Apter Power FC-SAI-1620M Field Installation and Functional Acceptance Workbook PDF

The first document organizes model-specific identity, technical data and system context. The second provides a separate installation, connection, commissioning and acceptance workflow.

Analog trip-threshold monitoring

Collects conditioned analog values used by trip logic.

Safety transmitter acquisition

Monitors safety-related transmitters within the voltage range.

Process protection measurement

Feeds protective measurements into a validated application.

Safe analog-input renewal

Restores the input module while retaining scaling and proof-test records.

Read the applicable Honeywell instructions before work. Verify FC-SAI-1620M and the installed Honeywell Safety Manager configuration.

Verify the complete FC-SAI-1620M marking and its assigned sixteen-channel safe analog-input position before work.

Place the connected process and control strategy in the approved maintenance state.

Isolate the applicable cabinet supply and analog input field energy before disconnecting conductors.

Record terminal numbers, channel assignments, polarity, shields and configured ranges before removal.

Use ESD controls and protect the backplane connector, terminal hardware and coated electronics.

Confirm the installed Safety Manager I/O chassis and carrier arrangement against the approved project.

Restore power in a controlled sequence and clear only diagnostics created by the maintenance activity.

Complete multi-point scaling, readback and trip-response proof testing and retain the measured result before returning the channel to automatic service.

Technical notes

Install FC-SAI-1620M only in the documented Safety Manager slot and preserve every approved channel assignment, shield and loop connection. After configuration restoration, verify input scaling, diagnostics and the configured safety response under the approved test procedure.

FAQS

What exact Honeywell system position is intended for FC-SAI-1620M?

FC-SAI-1620M is assigned to the documented Honeywell Safety Manager role as safe analog input module; confirm that role against the installed cabinet record.
Which field signal or controlled function is handled by FC-SAI-1620M?

Its documented signal duty is sixteen 0 to 4.1 v safety-related analog-input signals. The controlling source lists input range as 0 to 4.1 V.
Which companion hardware must be checked before installing FC-SAI-1620M?

Match FC-SAI-1620M with Safety Manager I/O chassis and conditioned analog safety transmitters; also retain the approved carrier, cable and project identity.
What electrical limit should an engineer verify before wiring FC-SAI-1620M?

Verify the model-specific value for Maximum load capacitance: 100 nF. Do not transfer a limit from another module revision.
How should the installed configuration be preserved when replacing FC-SAI-1620M?

Record the as-found slot, connector, channel assignment and project revision, then restore only the approved Honeywell Safety Manager configuration.
Which isolation or handling check applies to FC-SAI-1620M?

Apply the isolation and ESD sequence stated for FC-SAI-1620M; the source also identifies adc inaccuracy as +/-1 LSB.
What diagnostic or commissioning evidence is required for FC-SAI-1620M?

Complete the model-specific functional check for analog trip-threshold monitoring, review host diagnostics and retain the final test result.
Can FC-SAI-1620M be substituted for a visually similar Honeywell assembly?

No automatic substitution is assumed. Compare the complete FC-SAI-1620M marking, input channels, companion hardware, signal duty and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

FC-SAI-1620M

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for FC-SAI-1620M

Technical specifications for FC-SAI-1620M

Information

Information