Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 10311/2/1
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 10311/2/1
-
Manufacturer:Honeywell
-
Product Category:DCS Systems
-
Spare Part Number:10311/2/1
-
Estimated shipping dimensions:2x18.8x12.8cm
-
Weight:0.12 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Switch functions:RESET; FORCE ENABLE
-
Switch arrangement:Dual key-switch
-
System node:FSC
-
Contact configuration:Change-over contacts
Information
Overview
Manuals
Common Applications
Product Precautions
Honeywell 10311/2/1 is a dual key-switch assembly used on an FSC node to provide controlled RESET and FORCE ENABLE contact functions.
- Provides keyed FSC reset authorization
- Provides keyed force-enable authorization
- Separates the two service functions
- Mounts in the documented FSC operator circuit
10311/2/1 operates with FSC node wiring, Reset and force-enable control circuit, Approved cabinet terminals, FSC maintenance procedure.
Its engineered use includes FSC cabinet reset station, Force-enable access panel, Safety-system maintenance console, Controlled shutdown troubleshooting.
Important Notice: Confirm the complete 10311/2/1 marking, installed-system configuration, field connections and controlled functional test before commissioning or replacement.
Apter Power 10311/2/1 Manuals and Guides
Apter Power 10311/2/1 Product Technical Reference PDFHoneywell 10311/2/1 Official Technical Manual PDF
The first document is an Apter Power model-specific technical reference. The second supports installation, configuration and engineering verification for 10311/2/1.
FSC cabinet reset stationProvides keyed FSC reset authorization
Force-enable access panelProvides keyed force-enable authorization
Safety-system maintenance consoleSeparates the two service functions
Controlled shutdown troubleshootingMounts in the documented FSC operator circuit
Read the applicable Honeywell instructions before work. Verify 10311/2/1 and the installed Fail Safe Controller configuration.
1Verify the complete 10311/2/1 marking and its assigned Fail Safe Controller position before work.
2Isolate the applicable power and field energy before disconnecting 10311/2/1.
3Protect 10311/2/1 connectors and electronic assemblies with approved ESD controls.
4Record the installed wiring, channel assignment and configuration before replacement.
5Match FSC node wiring and Reset and force-enable control circuit to the documented system arrangement.
6Commission 10311/2/1 with controlled status, signal and diagnostic checks.
7Retain the final fsc cabinet reset station functional-test result in the maintenance record.
Technical notes
Wire each change-over contact to the documented FSC circuit and verify that the key can be removed only in the intended operating position.
FAQ View All FAQ
-
Does 10311/2/1 match FSC node wiring in a FSC cabinet reset station installation?Verify the complete 10311/2/1 marking, the documented Fail Safe Controller position and the installed FSC node wiring before fitting the assembly.
-
How should 10311/2/1 be wired when it must provides keyed fsc reset authorization?Isolate the circuit, identify every terminal and reproduce the approved polarity, shield and channel assignment for 10311/2/1; then continuity-test the affected path.
-
Which Fail Safe Controller records should be captured before removing 10311/2/1?Record the as-found wiring, installed position, active configuration and diagnostic state associated with 10311/2/1 before disconnection.
-
What controlled test confirms that 10311/2/1 can provides keyed force-enable authorization?Apply the approved field or simulated stimulus, observe the Fail Safe Controller indication and confirm the intended response without bypassing the normal interlocks.
-
Which Reset and force-enable control circuit condition should be checked when 10311/2/1 reports an abnormal state?Check the Reset and force-enable control circuit supply, seating and connection first, then compare channel diagnostics with the recorded 10311/2/1 baseline.
-
Can 10311/2/1 be moved directly into Force-enable access panel without validating FSC maintenance procedure?No. Confirm the FSC maintenance procedure, revision, connection scheme and Fail Safe Controller configuration before transferring 10311/2/1 to that duty.
-
What maintenance evidence is required after 10311/2/1 is used for Safety-system maintenance console?Retain the nameplate record, corrective action, final diagnostics and a controlled safety-system maintenance console functional-test result for 10311/2/1.
-
How should 10311/2/1 be returned to service in Controlled shutdown troubleshooting?Restore power under control, verify separates the two service functions, exercise the intended signal path and release 10311/2/1 only after the Fail Safe Controller remains in its approved operating state.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.