Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 10018/2/U
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 10018/2/U
-
Manufacturer:Honeywell
-
Product Category:DCS Systems
-
Spare Part Number:10018/2/U
-
Estimated shipping dimensions:2x18.5x12.8cm
-
Weight:0.18 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Node type:FSC node
-
Module function:FSC Safety Manager module
-
Module designation:FSC-SMM CC
-
Platform context:Honeywell coax control platform
-
Lifecycle status:Phased Out from 31 December 2025
-
Support mode:Commercially reasonable support effort
-
Modernization support:Available
Information
Overview
Manuals
Common Applications
Product Precautions
For legacy FSC maintenance records, Honeywell 10018/2/U provides the exact module code used to identify the FSC-SMM CC Safety Manager component within the coax control-platform lifecycle table.
- FSC node component
- Safety Manager module function
- FSC-SMM CC designation
- Legacy coax-platform lifecycle context
Treat the exact code, node location and controlled configuration as the service baseline, and include the documented phase-out status in spare-support and modernization planning.
Important Notice: Confirm the complete 10018/2/U identity, FSC-SMM CC designation and FSC node position; do not infer interfaces or ratings from a different legacy module.
Honeywell 10018/2/U Manuals & Downloads
Honeywell 10018/2/U Official Technical Reference Excerpt (PDF)Honeywell 10018/2/U Installation & Commissioning Guide (PDF)
The Official Technical Reference Excerpt documents the coax-platform phase-out context, exact 10018/2/U code, FSC node classification, FSC-SMM CC description and remaining support path. The Installation & Commissioning Guide is limited to identity control, configuration capture, approved isolation and site-specific acceptance practice.
Installed-base identification
Matches the exact module code in legacy FSC node inventories and maintenance records.
Spare-support assessment
Supports lifecycle planning for a module listed under the coax-platform phase-out program.
Maintenance preparation
Provides the FSC-SMM CC identity required before cabinet work or spares review begins.
Modernization scoping
Anchors site-specific migration planning to the installed FSC node component code.
Apply these controls specifically to Honeywell 10018/2/U before isolation, replacement, reconnection and final release.
1
Match the complete 10018/2/U code and FSC-SMM CC designation to the installed label before planning work.
2
Confirm the equipment is part of an FSC node and do not transfer assumptions from another coax-platform node type.
3
Capture the existing safety configuration, diagnostic state and cabinet position before isolation.
4
Perform removal or replacement only under the site’s approved safety-system maintenance procedure.
5
Preserve the original slot, cable and termination identification during any controlled intervention.
6
Account for the Phased Out lifecycle status when assessing spares, repair timing and outage risk.
7
After service, verify the restored configuration, node diagnostics and required safety-system acceptance checks.
8
Document the exact installed code and as-left condition for future support or modernization planning.
Alternative Names
10018 2 U, 10018/2/U, FSC-SMM CC
Technical notes
Match the complete 10018/2/U code and FSC-SMM CC designation, capture the site-controlled safety configuration and record the FSC node position before any intervention. Use the facility's approved safety-system maintenance and acceptance procedure for isolation, restoration and functional release.
FAQ View All FAQ
-
What is Honeywell 10018/2/U?It is an FSC Safety Manager module identified as FSC-SMM CC.
-
Which node type uses Honeywell 10018/2/U?The lifecycle table associates the code with an FSC node.
-
What does FSC-SMM CC identify for Honeywell 10018/2/U?It is the documented part description for the FSC Safety Manager module.
-
Which platform context includes Honeywell 10018/2/U?The code is listed within Honeywell's legacy coax control-platform phase-out table.
-
What lifecycle status applies to Honeywell 10018/2/U?The associated coax platform entered Phased Out status on 31 December 2025.
-
What support remains for Honeywell 10018/2/U after phase-out?Support is provided on a commercially reasonable effort basis, and modernization support remains available.
-
What should an engineer record before servicing Honeywell 10018/2/U?Record the exact module code, FSC node position, current safety configuration and diagnostic state before isolation.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.