Which station hardware must be paired with IC670FBI001?

Use IC670FBI001 with the documented Field Control terminal block, compatible BIU or MFP, and the installed worldfip network.

Which IC670FBI001 identity should be checked before installation?

Confirm the full IC670FBI001 catalog marking and the catalog number value IC670FBI001 against the installed station record.

Can IC670FBI001 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670FBI001, its terminal assignment, data allocation, signal type, power arrangement, and the documented configuration records value Rate, time slot, board number and version status before migration.

IC670FBI001

Name: IC670FBI001
Brand: General Electric
SKU: IC670FBI001

GE Fanuc Field Control FIP Bus Interface Unit, 24 VDC

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

GE IC670FBI001 is ge fanuc field control fip bus interface unit, 24 vdc. It couples a Field Control station to a WorldFIP network and coordinates data, configuration and diagnostics for the installed I/O modules.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for IC670FBI001

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for IC670FBI001

Manufacturer:

General Electric
Product Category:

PLC Systems
Spare Part Number:

IC670FBI001
Estimated shipping dimensions:

16.5x9x4cm
Weight:

0.2 kg
Tariff Code:

8537101190
Counliy of origin:

USA
Network:

WorldFIP
Input power:

24 V DC
Station capacity:

Up to 8 Field Control I/O modules
Documented hardware revision:

CC
Microprocessor firmware:

MPMA1 version 2.01
GENA firmware:

GENA1 version 2.0
FIP FDM library:

Version 4.3
Configuration protocol:

FIP protocol
Configuration records:

Rate, time slot, board number and version status

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

Connects the station to WorldFIP
Supports up to eight Field Control I/O modules
Exchanges configured input and output data with the host
Provides station and module diagnostic access

IC670FBI001 operates with WorldFIP network, Field Control terminal block, Up to eight compatible I/O modules, 24 V DC station power.

Engineered applications include WorldFIP bus interface field station, Remote I/O cabinet integration, Installed-base module renewal, Controlled commissioning and diagnostics.

Important Notice: Confirm IC670FBI001, 24 V DC station power, network address, bus termination and the configured I/O map before connecting the station to the host.

Apter Power IC670FBI001 Manuals and Guides

Apter Power IC670FBI001 Technical Data and System Reference PDF IC670FBI001 Field Installation and Commissioning Workbook PDF

The first document presents model-specific technical data and system identity. The second provides a separate installation, wiring and commissioning workflow.

WorldFIP bus interface field station

Performs the documented worldfip bus interface function at a distributed Field Control station.

Remote I/O cabinet integration

Exchanges configured process data with the host through the installed bus interface.

Installed-base module renewal

Restores an exact catalog-number position while preserving terminal and data identity.

Controlled commissioning and diagnostics

Supports staged wiring, configuration, diagnostic and functional verification.

Read the applicable GE Fanuc Field Control instructions before work. Verify IC670FBI001, its terminal assignment and the installed station configuration.

Verify the complete IC670FBI001 catalog marking and assigned Field Control position before work.

Place the connected WorldFIP process in its approved maintenance state before disturbing the station.

Isolate BIU and field power, then confirm a safe condition at the IC670FBI001 terminal block.

Label and record network conductors, shield, termination and field-power wiring before disconnecting any conductor from IC670FBI001.

Use ESD controls and protect the module connector, terminal block keying and exposed electronics.

Restore only the documented station address, data map and module configuration; do not copy settings from an adjacent module.

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.

Complete network communication, module recognition and I/O response tests and retain the final result before returning the process to service.

Technical notes

Confirm IC670FBI001, 24 V DC station power, network address, bus termination and the configured I/O map before connecting the station to the host.

FAQ View All FAQ

What Field Control function is assigned to IC670FBI001?

IC670FBI001 is ge fanuc field control fip bus interface unit, 24 vdc. It couples a Field Control station to a WorldFIP network and coordinates data, configuration and diagnostics for the installed I/O modules.
Which station hardware must be paired with IC670FBI001?

Use IC670FBI001 with the documented Field Control terminal block, compatible BIU or MFP, and the installed worldfip network.
Which IC670FBI001 identity should be checked before installation?

Confirm the full IC670FBI001 catalog marking and the catalog number value IC670FBI001 against the installed station record.
How should field wiring be transferred when replacing IC670FBI001?

Label and record network conductors, shield, termination and field-power wiring before disconnecting any conductor from IC670FBI001.

Which configuration item is critical when commissioning IC670FBI001?

Restore only the documented station address, data map and module configuration; do not copy settings from an adjacent module.
What diagnostic checks apply to IC670FBI001?

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.
How should the IC670FBI001 signal path be functionally tested?

Complete network communication, module recognition and I/O response tests and retain the final result before returning the process to service.
Can IC670FBI001 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670FBI001, its terminal assignment, data allocation, signal type, power arrangement, and the documented configuration records value Rate, time slot, board number and version status before migration.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.