Which station hardware must be paired with IC670ALG620?

Use IC670ALG620 with the documented Field Control terminal block, compatible BIU or MFP, and the installed supported pt, ni, nife or cu rtds.

Which IC670ALG620 identity should be checked before installation?

Confirm the full IC670ALG620 catalog marking and the catalog number value IC670ALG620 against the installed station record.

Can IC670ALG620 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670ALG620, its terminal assignment, data allocation, signal type, power arrangement, and the documented required biu revision value 2.0 or later before migration.

GE IC670ALG620 GE Fanuc four-channel RTD analog input module

Name: IC670ALG620
Brand: General Electric
SKU: IC670ALG620

IC670ALG620

GE Fanuc four-channel RTD analog input module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for IC670ALG620

Manufacturer:

General Electric

Product Category:

PLC Systems

Spare Part Number:

IC670ALG620

Estimated shipping dimensions:

5.3x8.5x8.1cm

Weight:

0.25 kg

Tariff Code:

8537101190

Counliy of origin:

USA

RTD channels:

Wiring:

Three-wire or four-wire

Supported sensor families:

Platinum, nickel, nickel-iron and copper RTDs

Resistance ranges:

0 to 500 ohm; 0 to 3000 ohm

Converter resolution:

15 bits plus sign

Analog input data:

4 words

Status data:

32 bits optional

Fault-clear data:

8 bits optional

Engineering-unit resolution:

0.1 degC, 0.1 degF or 0.1 ohm

Automatic calibration:

At powerup and every minute

Required BIU revision:

2.0 or later

Information

Overview Manuals Common Applications Product Precautions

GE IC670ALG620 is ge fanuc four-channel rtd analog input module. It excites and measures four three-wire or four-wire RTDs and reports compensated temperature or resistance values.

Accepts four independent RTD inputs
Supports three-wire and four-wire compensation
Reports temperature or resistance in tenths
Repeats internal A/D calibration every minute

IC670ALG620 operates with Supported Pt, Ni, NiFe or Cu RTDs, Three- or four-conductor sensor wiring, Field Control BIU revision 2.0 or later, Configured alarm and fault-clear data.

Engineered applications include four-channel RTD temperature measurement field station, Remote I/O cabinet integration, Installed-base module renewal, Controlled commissioning and diagnostics.

Important Notice: Match RTD type, alpha, wiring method and engineering units on every channel; prove lead compensation and open-sensor diagnostics before use.

Apter Power IC670ALG620 Manuals and Guides

Apter Power IC670ALG620 Technical Data and System Reference PDF IC670ALG620 Field Installation and Commissioning Workbook PDF

The first document presents model-specific technical data and system identity. The second provides a separate installation, wiring and commissioning workflow.

four-channel RTD temperature measurement field station

Performs the documented four-channel rtd temperature measurement function at a distributed Field Control station.

Remote I/O cabinet integration

Exchanges configured process data with the host through the installed bus interface.

Installed-base module renewal

Restores an exact catalog-number position while preserving terminal and data identity.

Controlled commissioning and diagnostics

Supports staged wiring, configuration, diagnostic and functional verification.

Read the applicable GE Fanuc Field Control instructions before work. Verify IC670ALG620, its terminal assignment and the installed station configuration.

Verify the complete IC670ALG620 catalog marking and assigned Field Control position before work.

Place the connected four-channel RTD temperature measurement process in its approved maintenance state before disturbing the station.

Isolate BIU and field power, then confirm a safe condition at the IC670ALG620 terminal block.

Label and record channel conductors, returns, shields and external supply wiring before disconnecting any conductor from IC670ALG620.

Use ESD controls and protect the module connector, terminal block keying and exposed electronics.

Restore only the documented channel range, scaling, alarms and default behavior; do not copy settings from an adjacent module.

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.

Complete low, midpoint and high signal checks plus alarm and diagnostic verification and retain the final result before returning the process to service.

FAQS

What Field Control function is assigned to IC670ALG620?

IC670ALG620 is ge fanuc four-channel rtd analog input module. It excites and measures four three-wire or four-wire RTDs and reports compensated temperature or resistance values.
Which station hardware must be paired with IC670ALG620?

Use IC670ALG620 with the documented Field Control terminal block, compatible BIU or MFP, and the installed supported pt, ni, nife or cu rtds.
Which IC670ALG620 identity should be checked before installation?

Confirm the full IC670ALG620 catalog marking and the catalog number value IC670ALG620 against the installed station record.
How should field wiring be transferred when replacing IC670ALG620?

Label and record channel conductors, returns, shields and external supply wiring before disconnecting any conductor from IC670ALG620.
Which configuration item is critical when commissioning IC670ALG620?

Restore only the documented channel range, scaling, alarms and default behavior; do not copy settings from an adjacent module.
What diagnostic checks apply to IC670ALG620?

Energize in a controlled sequence and review PWR, channel, module and network diagnostics.
How should the IC670ALG620 signal path be functionally tested?

Complete low, midpoint and high signal checks plus alarm and diagnostic verification and retain the final result before returning the process to service.
Can IC670ALG620 be replaced by a visually similar Field Control module?

No direct substitution should be assumed. Match IC670ALG620, its terminal assignment, data allocation, signal type, power arrangement, and the documented required biu revision value 2.0 or later before migration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

IC670ALG620

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for IC670ALG620

Technical specifications for IC670ALG620

Information

Information