Which control family uses GE DS200DMCBG1AJE?

DS200DMCBG1AJE is identified as a Mark V DOS DUP processor board.

Which connectors must be matched when replacing GE DS200DMCBG1AJE?

The board record lists three 26-pin connectors and one 40-pin connector, so each cable position and orientation must be preserved.

How many jumpers are present on GE DS200DMCBG1AJE?

The exact-model hardware record identifies nineteen jumpers.

Which indicators are identified on GE DS200DMCBG1AJE?

The two documented board indicators are CR2 and CR12.

What circuit protection is visible on GE DS200DMCBG1AJE?

Two fuses are identified on the board assembly.

What should be captured before removing GE DS200DMCBG1AJE?

Record the complete AJE suffix, installed position, connector mapping, cable orientation, jumper states and LED condition.

Why should a blown fuse on GE DS200DMCBG1AJE not be replaced blindly?

A fuse can indicate an external wiring or board fault, so the protected circuit must be checked before controlled re-energization.

Which checks close GE DS200DMCBG1AJE commissioning?

Verify cable seating, jumper-state match, fuse continuity, CR2/CR12 behavior and the cabinet's duplicate-processing and interlock response.

DS200DMCBG1AJE

Name: DS200DMCBG1AJE
Brand: General Electric
SKU: DS200DMCBG1AJE

Processor Board

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

GE DS200DMCBG1AJE provides duplicate-processor hardware within the Mark V control platform. Its connector set and configurable board hardware make identity, cable position and jumper-state control central to replacement work.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for DS200DMCBG1AJE

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for DS200DMCBG1AJE

Manufacturer:

General Electric
Product Category:

Gas Turbine Control
Spare Part Number:

DS200DMCBG1AJE
Estimated shipping dimensions:

28x21.4x3.3cm
Weight:

0.64 kg
Tariff Code:

8537101190
Counliy of origin:

USA
Product family:

Mark V
Board function:

DOS DUP processor board
Assembly type:

Normal assembly
Functional acronym:

DMCB
Revision identity:

AJE
Connector set:

3 x 26-pin; 1 x 40-pin
Jumper count:

19
Status indicators:

CR2 and CR12 LEDs
Fuse count:

2

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

GE DS200DMCBG1AJE concentrates Mark V duplicate-processor connections on a normal coated board assembly. The AJE suffix is retained as part of the exact revision identity and is not expanded beyond the verified board record.

Mark V DOS DUP processor function
Three 26-pin and one 40-pin connectors
Nineteen configurable jumpers
CR2 and CR12 diagnostic LEDs with two fuses

The controlled system path is Mark V cabinet connections → DS200DMCBG1AJE processor board → Connector and jumper-controlled interfaces → Duplicate-processing control path. Verify each boundary against the installed project record.

Important Notice: Isolate the cabinet and verify stored-energy conditions before touching DS200DMCBG1AJE.

GE DS200DMCBG1AJE Manuals & Downloads

GE DS200DMCBG1AJE Technical Reference (PDF)GE DS200DMCBG1AJE Installation & Commissioning Guide (PDF)

The Technical Reference consolidates the verified data available for GE DS200DMCBG1AJE; the Installation & Commissioning Guide organizes controlled field preparation, checks and acceptance.

Mark V processor-board replacement

Restores the same DOS DUP board position while retaining the exact cable and jumper record.

Duplicate-processing maintenance

Supports fault isolation where the installed control depends on the DMCB duplicate-processor path.

Connector-path verification

Provides a controlled boundary for tracing the three 26-pin and one 40-pin connections.

Board-level diagnostics

Uses CR2 and CR12 observations together with fuse and supply checks during troubleshooting.

Apply these controls to GE DS200DMCBG1AJE before isolation, removal, reconnection, energization and release.

Isolate the cabinet and verify stored-energy conditions before touching DS200DMCBG1AJE.

Record all four connector locations and cable orientations before disconnecting the board.

Capture every jumper position; do not move a factory or application jumper without the controlled drawing.

Use ESD controls and handle the normal coated board only by its approved edges.

Check both fuses for continuity and determine the external cause before installing a replacement fuse.

Inspect connector pins and ribbon-cable strain relief before reseating the three 26-pin and one 40-pin connections.

Compare CR2 and CR12 behavior with the known-good cabinet record after controlled energization.

Release the board only after the duplicate-processing path, interlocks and commanded safe state have been functionally checked.

Technical notes

GE DS200DMCBG1AJE is a Mark V DOS DUP processor board with four multi-pin connectors, configurable jumpers, diagnostic LEDs and dual fuse protection.

FAQ View All FAQ

Which control family uses GE DS200DMCBG1AJE?

DS200DMCBG1AJE is identified as a Mark V DOS DUP processor board.
Which connectors must be matched when replacing GE DS200DMCBG1AJE?

The board record lists three 26-pin connectors and one 40-pin connector, so each cable position and orientation must be preserved.
How many jumpers are present on GE DS200DMCBG1AJE?

The exact-model hardware record identifies nineteen jumpers.
Which indicators are identified on GE DS200DMCBG1AJE?

The two documented board indicators are CR2 and CR12.

What circuit protection is visible on GE DS200DMCBG1AJE?

Two fuses are identified on the board assembly.
What should be captured before removing GE DS200DMCBG1AJE?

Record the complete AJE suffix, installed position, connector mapping, cable orientation, jumper states and LED condition.
Why should a blown fuse on GE DS200DMCBG1AJE not be replaced blindly?

A fuse can indicate an external wiring or board fault, so the protected circuit must be checked before controlled re-energization.
Which checks close GE DS200DMCBG1AJE commissioning?

Verify cable seating, jumper-state match, fuse continuity, CR2/CR12 behavior and the cabinet's duplicate-processing and interlock response.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.