Which installed hardware must be paired with CON041?

Use CON041 with the documented PR642x DIN-rail eddy-current transducer system components: PR6422, PR6423, PR6424 or PR6426 probe, DIN-rail cabinet position, Negative DC supply and signal wiring.

How should the Converter model value for CON041 be verified?

Confirm the complete nameplate and order code before work; the documented converter model is CON041.

What connection detail is critical when installing CON041?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.

What configuration record should be retained when replacing CON041?

Retain the as-found position, alternative models, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.

Can CON041 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved PR642x DIN-rail eddy-current transducer system configuration.

CON041 PR642x eddy-current sensor signal converter

Name: CON041
Brand: Emerson
SKU: CON041

CON041

PR642x eddy-current sensor signal converter

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for CON041

Manufacturer:

Emerson

Product Category:

Machinery Monitoring System

Spare Part Number:

CON041

Estimated shipping dimensions:

16x15x2cm

Weight:

0.15 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Alternative models:

SNG-CON041; SNG-CON041-SF

Mounting:

DIN rail

Compatible sensors:

PR6422; PR6423; PR6424; PR6426

Standard PR6422 range:

1 mm; linearity <=1.5%

Standard PR6423 range:

2 mm; linearity <=1.0%

Standard PR6424 range:

4 mm; linearity <=1.5%

Standard PR6426 range:

8 mm; linearity <=1.5%

Voltage output:

-4 to -20 V DC

Installation environment:

Control cabinet

Information

Overview Manuals Common Applications Product Precautions

Emerson CON041 is pr642x eddy-current sensor signal converter. It powers and conditions a supported PR642x probe and delivers a proportional voltage signal from a DIN-rail control-cabinet installation.

Mounts on a control-cabinet DIN rail
Supports four documented PR642x probe families
Provides family-specific standard measuring spans
Outputs a proportional negative DC voltage

CON041 operates with PR6422, PR6423, PR6424 or PR6426 probe, DIN-rail cabinet position, Negative DC supply and signal wiring, Compatible Emerson or third-party voltage input.

Engineered applications include Compact radial-vibration channels, Axial displacement loops, Differential expansion monitoring, Large-gap shaft-position measurement.

Important Notice: Match the converter setup to the exact PR6422/3/4/6 probe, isolate cabinet power, preserve terminal identity and confirm gap voltage plus full-range response after DIN-rail installation.

Apter Power CON041 Manuals and Guides

Apter Power CON041 Measurement-System Technical Reference PDF Apter Power CON041 Installation, Loop Check and Acceptance Workbook PDF

The first document provides model-specific technical and measurement-system reference data. The second is a separate field workbook for mounting, wiring, commissioning and acceptance records.

Compact radial-vibration channels

Conditions PR6422 signals for compact shaft measurements.

Axial displacement loops

Supports PR6423 or PR6424 thrust and shaft-position loops.

Differential expansion monitoring

Provides an installation-ready cabinet converter for expansion channels.

Large-gap shaft-position measurement

Pairs with PR6426 for the documented eight-millimetre standard span.

Read the applicable Emerson machinery-monitoring instructions before work. Verify CON041 and the installed PR642x DIN-rail eddy-current transducer system configuration.

Confirm the complete CON041/SNG-CON041/SNG-CON041-SF identity and paired probe family before replacement.

Place the monitored machine and protection channel in the approved maintenance state.

Isolate cabinet power and record every supply, signal and shield terminal.

Release the DIN-rail latch without bending terminals or stressing adjacent converters.

Use ESD controls and keep the sensor connector plus terminal area clean and dry.

Restore the probe-family range and verify it matches PR6422, PR6423, PR6424 or PR6426.

Set the probe static gap within the correct family linear region and record the quiescent output.

Prove polarity, full-range response and alarm action before returning the channel to service.

FAQS

What measurement or system function does CON041 perform?

CON041 is a pr642x eddy-current sensor signal converter. It powers and conditions a supported PR642x probe and delivers a proportional voltage signal from a DIN-rail control-cabinet installation.
Which installed hardware must be paired with CON041?

Use CON041 with the documented PR642x DIN-rail eddy-current transducer system components: PR6422, PR6423, PR6424 or PR6426 probe, DIN-rail cabinet position, Negative DC supply and signal wiring.
How should the Converter model value for CON041 be verified?

Confirm the complete nameplate and order code before work; the documented converter model is CON041.
What connection detail is critical when installing CON041?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.
How is CON041 mechanically installed without changing measurement behavior?

Isolate cabinet power and record every supply, signal and shield terminal.
What commissioning test should be completed for CON041?

Prove polarity, full-range response and alarm action before returning the channel to service.
What configuration record should be retained when replacing CON041?

Retain the as-found position, alternative models, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.
Can CON041 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved PR642x DIN-rail eddy-current transducer system configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

CON041

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for CON041

Technical specifications for CON041

Information