Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 5X00622G01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 5X00622G01
-
Manufacturer:Emerson
-
Product Category:DCS Systems
-
Spare Part Number:5X00622G01
-
Estimated shipping dimensions:12×7.8×16.5cm
-
Weight:0.36 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Product type:RTD input electronics module
-
Channel count:16
-
Sensor wiring:Three-wire RTD
-
Digital output:14-bit linear resistance value
-
Personality module:Not required
-
Diagnostic LEDs:Power, communication, internal error and channels 1-16
-
Channel diagnostics:Overrange, channel communication failure or open wire
Information
Overview
Manuals
Common Applications
Product Precautions
In temperature-monitoring service, WESTINGHOUSE 5X00622G01 provides channel conversion, open-wire diagnostics and front-panel status indication. Sensor type, three-wire balance and controller scaling must be restored channel by channel.
- Sixteen RTD channels
- Three-wire sensor inputs
- 14-bit resistance output
- No personality module required
Validate each RTD loop by confirming sensor type, three-wire continuity, open-wire diagnostics and controller scaling before returning temperature control to service.
Important Notice: Isolate or simulate affected RTD loops before handling WESTINGHOUSE 5X00622G01.
WESTINGHOUSE 5X00622G01 Manuals & Downloads
WESTINGHOUSE 5X00622G01 Technical Reference (PDF)WESTINGHOUSE 5X00622G01 Installation & Commissioning Guide (PDF)
The Technical Reference consolidates the sixteen-channel RTD architecture; the installation guide focuses on sensor matching, three-wire balance, open-wire response and restored scaling.
Multipoint temperature monitoring
Acquires sixteen three-wire RTD sensors.
Legacy Ovation maintenance
Restores an installed 5X00622G01 temperature-input position.
Open-wire troubleshooting
Uses channel diagnostics to isolate sensor and wiring faults.
Temperature-loop commissioning
Supports resistance injection and controller-scaling checks.
Record every RTD type, lead assignment and scaling value before isolating the sixteen-channel module.
1
Isolate or simulate affected RTD loops before handling WESTINGHOUSE 5X00622G01.
2
Confirm the complete G01 identity and all sixteen configured point assignments.
3
Record sensor type, three-wire terminals, engineering units and alarm limits for each channel.
4
Keep the three conductors for each RTD together and preserve the original lead pairing.
5
Do not install a personality module in the 5X00622G01 configuration.
6
Inspect P, C, I and channel LED indications during startup.
7
Use traceable resistance values to verify conversion and controller scaling.
8
Release the module only after open-wire, overrange and all used-channel checks pass.
Technical notes
WESTINGHOUSE 5X00622G01 is a sixteen-channel Ovation electronics module for three-wire RTD resistance inputs.
FAQ View All FAQ
-
How many RTD channels are provided by WESTINGHOUSE 5X00622G01?It provides sixteen RTD input channels.
-
Which sensor wiring arrangement applies to WESTINGHOUSE 5X00622G01?The module is configured for three-wire RTD inputs.
-
What digital format is produced by WESTINGHOUSE 5X00622G01?It converts measured resistance to a 14-bit linear digital value.
-
Does WESTINGHOUSE 5X00622G01 require a personality module?No. The valid module combination lists no separate personality module.
-
What does the P LED indicate on WESTINGHOUSE 5X00622G01?The green P LED indicates that the module's +5 V power is satisfactory.
-
What does the C LED show on WESTINGHOUSE 5X00622G01?The green C LED indicates communication between the module and the Ovation controller.
-
Which faults can light a channel LED on WESTINGHOUSE 5X00622G01?A channel error can indicate overrange, failed channel communication or an open RTD wire.
-
How should WESTINGHOUSE 5X00622G01 be commissioned?Inject traceable resistance values on every used channel and verify wiring, 14-bit conversion, engineering scaling and diagnostics.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.