The Bently Nevada 3500/22M (Part No. 288055-01) is a Standard Transient Data Interface (TDI) module, acting as the primary communicator between the 3500 monitoring system and System 1 software.
- Interface Between the 3500 Monitoring System and System 1 Machinery Management Ssoftware
- Combines Capability of 3500/20 RIM with Communication Processor
- Operates in Conjunction with the M Series Monitors
The Bently Nevada™ 3500/22M Transient Data Interface (TDI)is the interface between the 3500 monitoring system andcompatible software (System 1 Condition Monitoring andDiagnostic software and 3500 System Configurationsoftware). The TDI combines the function of a 3500/20 RackInterface Module (RIM) with the data collection capability of acommunication processor such as TDXnet
Important Notice:
Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 3500/22M 288055-01 DATA INTERFACE MODULE Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Data Collection and Integration: Combining the functionality of the old 3500/20 Rack Interface Module (RIM) with the data collection capabilities of communication processors such as TDXnet.
Transient and static data: It can continuously collect steady-state and transient dynamic waveform data of machinery, and transmit it to the host through Ethernet for fault diagnosis.
Configuration management: The panel is equipped with a key lock, which can place the rack in "RUN" or "GRAM" mode for locking or allowing remote reconfiguration.