Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 350610-00-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 350610-00-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:350610-00-05
-
Estimated shipping dimensions:24.13×2.44×24.18cm
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Operating Temperature:0℃ to +65℃
-
Storage Temperature:-40℃ to +85℃
-
Humidity:0% to 95% non-condensing.
-
Agency Approval Option:None
-
Interface Variant Option:Acceleration Interface
-
Weight:No exact net/device weight for 350610-00-05 was confirmed in the reviewed official 3500 System manufacturer material. Verify the physical nameplate and current exact-model document before shipping.
-
Dimensions:No exact overall product dimensions for 350610-00-05 were confirmed in the reviewed official 3500 System manufacturer material. Verify the physical unit and current exact-model drawing before mounting or shipping calculations.
Information
Overview
Manuals
Common Applications
Product Precautions
The 350610-00-05 is the Seismic Acceleration interface module/preamplifier in the Bentley Nevada 3500 mechanical protection system. This module serves as a crucial link between hazardous area sensors and safe area monitoring systems.
- Channel-to-channel isolation
- Elimination of ground loops
- Micron-level signal with negligible loss
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 350610-00-05 Seismic Acceleration Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Petrochemical & Oil Refining
Provides an intrinsically safe explosion-proof barrier for the bearing vibration monitoring systems of core refinery hydroprocessing units and high-pressure cracked gas compressor trains.
Nuclear Power
In the bearing dynamics monitoring system of a nuclear power plant's steam generator feedwater pump, its excellent channel-to-channel isolation is utilized to eliminate signal crosstalk between multiple sensors.
Thermal Power Plants
Used in high electromagnetic interference areas such as steam turbines and boiler induced draft fans of coal-fired or gas-fired power units to isolate and eliminate ground loop noise generated by heavy electrical equipment.
Hydroelectric
Monitors high-frequency hydraulic shocks and mechanical shaft vibrations of thrust and upper guide bearings in large vertical or horizontal hydro-generator units.
Pharmaceuticals
Isolates and monitors the bearing vibration status of high-speed chemical reactor agitators and centrifugal separators handling high-concentration flammable solvents.
When using the 350610-00-05 isolator, the core priorities are safe-area installation, reliable grounding, and parameter matching. The module must be installed inside a safe-area cabinet and never directly exposed to explosive fields. The backplane earth rail must connect to a dedicated intrinsically safe ground to prevent interference from double-ended shield grounding. The module supports hot-swapping, but during replacement, you must verify the "05" suffix channel impedance to ensure full compatibility with the front-end accelerometer and back-end 3500 monitor, as mismating is strictly prohibited.
FAQ View All FAQ
-
What exactly is the product 350610-00-05?It is an industrial-grade intrinsically safe galvanic isolator module used as a signal isolation interface between acceleration sensors and 3500 monitor modules.
-
What is the core operating principle of 350610-00-05?It utilizes galvanic isolation (optoelectronic or electromagnetic coupling) technology to cut off the electrical loop between hazardous and safe areas while ensuring accurate signal transmission, preventing accidental high energy from entering hazardous locations.
-
How do you use a product like 350610-00-05?It must be plugged into a dedicated Bently Nevada isolator backplane, with its input terminal connected to field sensors (like Proximitors or accelerometers) and its output terminal linked to the 3500 monitor rack.
-
Why is it necessary to use this module in vibration monitoring?To achieve explosion protection and interference immunity. It prevents sparks on the sensor side from triggering explosions in hazardous field environments (e.g., flammable gases) and blocks ground loop interference.
-
Does 350610-00-05 require an independent external power supply?It is unified powered by 24 VDC through the Bently internal system backplane or loops, requiring no separate civil AC power connection.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.