Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330171-00-12-05-01-05
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330171-00-12-05-01-05
-
Manufacturer:Bently Nevada
-
Product Category:DCS Systems
-
Spare Part Number:330171-00-12-05-01-05
-
Estimated shipping dimensions:119x1.3x1.2cm
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe series:330171
-
Mounting thread:1/4-28 UNF-2A
-
Unthreaded length:0.0 in
-
Overall case length:1.2 in
-
Total probe length:0.5 m
-
Connector:Miniature coaxial ClickLoc
-
Connector protector:Included
-
Cable construction:Standard
-
Probe tip diameter:5.2 mm
-
Cable impedance:75 ohm
-
Maximum cable outside diameter:2.8 mm
-
Approval option:Multiple Approvals
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330171-00-12-05-01-05 is a threaded 3300 5 mm proximity probe for non-contact shaft position and vibration measurement. Its order code defines a 1.2 in case and 0.5 m integral probe cable.
- Uses an eddy-current sensing tip for conductive shaft targets
- Connects through the ClickLoc coaxial interface with its protector
- Works as one element of the matched 3300 5 mm transducer chain
- Supports static gap and dynamic machinery-motion monitoring
330171-00-12-05-01-05 operates with 3300 XL extension cable, 3300 XL 5 mm Proximitor Sensor, conductive shaft target, monitoring channel.
Typical engineered duties include Short cable-run bearing housings, Fluid-film bearing shaft monitoring, Keyphasor phase reference pickup, Rotational speed measurement.
Important Notice: Verify the complete 330171-00-12-05-01-05 order code, mounting clearance, cable route and transducer-system electrical length before installation; a different BB or CC code changes the physical configuration.
Apter Power 330171-00-12-05-01-05 Manuals and Guides
- Apter Power 330171-00-12-05-01-05 Product Reference Manual
- Baker Hughes Bently Nevada 3300 5 mm Transducer System Datasheet
Important Notice: The first document is an Apter Power 330171-00-12-05-01-05 model-specific technical reference. The second is a distinct document for installation, configuration or system engineering.
330171-00-12-05-01-05 Short cable-run bearing housings
Uses an eddy-current sensing tip for conductive shaft targets
330171-00-12-05-01-05 Fluid-film bearing shaft monitoring
Connects through the ClickLoc coaxial interface with its protector
330171-00-12-05-01-05 Keyphasor phase reference pickup
Works as one element of the matched 3300 5 mm transducer chain
330171-00-12-05-01-05 Rotational speed measurement
Supports static gap and dynamic machinery-motion monitoring
Read the applicable Bently Nevada installation instructions before work. Verify 330171-00-12-05-01-05 and the installed-system configuration.
1
Confirm that the probe route and mounting arrangement accept the 1.2 in case.
2
Use a transducer chain engineered for the 0.5 m probe lead.
3
Protect the ClickLoc mating surfaces from contamination during assembly.
4
Set and verify the mechanical gap before enabling the monitoring channel.
5
Commission 330171-00-12-05-01-05 under controlled conditions and retain the completed functional-test record before release.
Technical notes
The 0.5 m integral lead is combined with the specified 3300 XL extension cable so the installed 3300 5 mm transducer chain has the engineered electrical length.
FAQ View All FAQ
-
Which transducer system accepts 330171-00-12-05-01-05?Use it within a 3300 5 mm system comprising the probe, the specified 3300 XL extension cable and a 3300 XL 5 mm Proximitor Sensor.
-
What does the 00-12 segment identify on 330171-00-12-05-01-05?It identifies zero unthreaded length and a 1.2 in overall case length.
-
What does the cable code identify on 330171-00-12-05-01-05?The CC field specifies the integral probe lead as 0.5 m.
-
How should the connector on 330171-00-12-05-01-05 be handled?Keep the miniature coaxial ClickLoc connection clean, fully seated and protected from side loading.
-
Can 330171-00-12-05-01-05 be gapped by matching the previous thread count?No. Establish the required gap from the approved machine procedure and verify the live transducer output.
-
What target material is required when checking 330171-00-12-05-01-05?Use the machine target material or the approved calibration target because eddy-current response depends on target conductivity and geometry.
-
Which commissioning measurements apply to 330171-00-12-05-01-05?Record gap voltage, shaft-motion response, cable routing condition and monitor-channel indication.
-
What must be compared before replacing 330171-00-12-05-01-05?Compare every order-code field, the installed extension cable, the Proximitor Sensor, mounting geometry and required electrical length.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.