Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 900800XL-090-03-01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 900800XL-090-03-01
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:900800XL-090-03-01
-
Estimated shipping dimensions:8.8x3.4x7cm
-
Weight:0.24 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Transducer family:9000XL 5/8 mm
-
System length:9.0 m
-
Mounting option:35 mm DIN rail
-
Scale factor:7.87 V/mm (200 mV/mil)
-
Linear range:2.0 mm (80 mil)
-
Power requirement:-17.5 to -26 VDC
-
Signal type:Proportional displacement voltage
-
System rule:Probe plus extension cable must equal 9.0 m
Information
Overview
Manuals
Common Applications
Product Precautions
This sensor conditions the matched probe and extension-cable signal into a proportional voltage for machinery vibration and position measurement.
- Conditions the matched 9000XL probe and cable signal.
- Provides a 200 mV/mil proportional output.
- Supports an 80 mil linear measurement range.
- Mounts on standard 35 mm DIN rail for panel integration.
Use 900800XL-090-03-01 only in the specified monitoring chain and verify the complete signal path after controlled replacement.
Important Notice: Capture the installed 900800XL-090-03-01 interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
Bently Nevada 900800XL-090-03-01 Manuals & Downloads
Bently Nevada 900800XL-090-03-01 Technical Reference (PDF)Bently Nevada 900800XL-090-03-01 Installation & Commissioning Guide (PDF)The first PDF covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance test results.
Radial vibration
Measures shaft motion relative to the bearing.
Axial position
Tracks thrust or shaft-position changes.
Keyphasor service
Provides a once-per-turn reference when configured.
Legacy panel replacement
Restores the specified 9.0 m transducer channel.
Before installing Bently Nevada 900800XL-090-03-01, confirm the specified system, interfaces and controlled configuration.
1
Confirm the complete 900800XL-090-03-01 marking and the specified 9000xl 5/8 mm proximitor sensor position.
2
Place the affected machine protection channel in the approved maintenance state.
3
Capture the installed transducer family, system length and mounting option before removal.
4
De-energize the associated monitor, sensor supply or field circuit as the procedure requires.
5
Label every connector, conductor and shield before separation.
6
Inspect mating contacts, mounting hardware and cable condition before installation.
7
Restore the retained configuration and verify signal polarity and proportional response.
8
Function-test the complete alarm, indication and shutdown path before returning the machine to service.
Technical notes
Capture the installed 900800XL-090-03-01 interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
FAQ View All FAQ
-
Which transducer family does Bently Nevada 900800XL-090-03-01 belong to?Bently Nevada 900800XL-090-03-01 belongs to the 9000XL 5/8 mm family.
-
What is the system length of Bently Nevada 900800XL-090-03-01?The system length is 9.0 m.
-
What mounting option applies to Bently Nevada 900800XL-090-03-01?The mounting option is 35 mm DIN rail.
-
What is the scale factor of Bently Nevada 900800XL-090-03-01?The scale factor is 7.87 V/mm (200 mV/mil).
-
What is the linear range of Bently Nevada 900800XL-090-03-01?The linear range is 2.0 mm (80 mil).
-
What is the power requirement of Bently Nevada 900800XL-090-03-01?The power requirement is -17.5 to -26 VDC.
-
What signal type applies to Bently Nevada 900800XL-090-03-01?The signal type is Proportional displacement voltage.
-
What system rule applies to Bently Nevada 900800XL-090-03-01?The system rule is Probe plus extension cable must equal 9.0 m.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.