Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330904-00-05-05-01-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include 330904-00-05-05-01-00 and the visible revision or assembly identity in your enquiry. Keep the full reference on the quotation. -
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered 330904-00-05-05-01-00 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330904-00-05-05-01-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330904-00-05-05-01-00
-
Weight:0.62 kg
-
Tariff Code:8537101190
-
Probe family:3300 XL NSv
-
Case thread:M8 x 1
-
Lead armor:stainless steel armored
-
Unthreaded length:0 mm
-
Overall case length:50 mm
-
Probe lead length:0.5 m
-
Connector:ClickLoc connector with protector
-
Approval selection:no agency approval selected
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Bently Nevada 330904-00-05-05-01-00. This 3300 XL NSv probe senses the gap to a conductive target as one part of the complete proximity transducer chain.
Nominal 0.5 m probe DC resistance: 4.0 ± 0.5 Ω
Recommended flat target diameter: 13 mm minimum
Matched-system reference gap: 1.0 mm (40 mil)
Matched-system response: 0 to 10 kHz, typical
Recommended flat target diameter: 13 mm minimum
Matched-system reference gap: 1.0 mm (40 mil)
Matched-system response: 0 to 10 kHz, typical
Part prefix 330904 selects a M8 x 1 case with stainless steel lead armor. The selected unthreaded section is 0 mm, within an overall 50 mm case. The NSv probe uses TipLoc tip molding and CableLoc cable attachment rated at 220 N (50 lb) pull strength. Gold-plated ClickLoc contacts lock together; the connector protector helps exclude liquid from the probe-to-cable joint.
Option 05 provides a 0.5 m lead. Code 01 supplies a clickloc connector with protector; keep this connection clean and match it to the extension cable. Only a matched NSv probe, extension cable and Proximitor sensor establish measurement performance. For the complete calibrated system, the manufacturer specifies 7.87 V/mm (200 mV/mil) average scale factor and a 1.5 mm (60 mil) linear range, approximately 0.25 to 1.75 mm from a suitable target.
The final code 00 denotes no agency approval selected. Gap, scale factor and linear range describe the matched 3300 XL NSv system, rather than this probe alone. The NSv system addresses restricted counterbore and side-view installations, including small shafts and flat axial targets. Supported system applications include radial vibration or position, thrust position and speed or phase reference; the installed target and monitor channel determine which measurement is used.
Option 05 provides a 0.5 m lead. Code 01 supplies a clickloc connector with protector; keep this connection clean and match it to the extension cable. Only a matched NSv probe, extension cable and Proximitor sensor establish measurement performance. For the complete calibrated system, the manufacturer specifies 7.87 V/mm (200 mV/mil) average scale factor and a 1.5 mm (60 mil) linear range, approximately 0.25 to 1.75 mm from a suitable target.
The final code 00 denotes no agency approval selected. Gap, scale factor and linear range describe the matched 3300 XL NSv system, rather than this probe alone. The NSv system addresses restricted counterbore and side-view installations, including small shafts and flat axial targets. Supported system applications include radial vibration or position, thrust position and speed or phase reference; the installed target and monitor channel determine which measurement is used.
Installed-system reference: 3300 XL NSv proximity transducer system. Keep the armored lead and ClickLoc protector clear of the machine case.
Technical downloads for Bently Nevada 330904-00-05-05-01-00: selected original manufacturer pages and a model-specific Apter Power installation guide.
-
Bently Nevada 330904-00-05-05-01-00 technical reference
Original manufacturer excerpt - PDF, 5 pages. The 330904 option matrix identifies probe construction and lead selection. System performance requires a matched extension cable and Proximitor sensor. -
Bently Nevada 330904-00-05-05-01-00 installation guide
Prepared by Apter Power - PDF, 5 pages. Installation checks, fitting and lead routing, commissioning and verification.
The technical reference preserves selected original manufacturer pages. The installation guide is prepared by Apter Power for this exact model; apply site procedures and the original equipment documentation during work.
Measurement role: 330904-00-05-05-01-00 is a 3300 XL NSv proximity probe installed opposite a suitable machine target. In its matched probe, extension-cable and Proximitor chain, it converts changes in probe-to-target gap into signals used for relative shaft vibration or position measurements.
System compatibility: The M8 x 1 case, 0.5 m integral lead and ClickLoc connector with protector must fit the installed bracket and complete transducer-system length. The approved monitor configuration and target material determine which measurement functions are enabled.
System compatibility: The M8 x 1 case, 0.5 m integral lead and ClickLoc connector with protector must fit the installed bracket and complete transducer-system length. The approved monitor configuration and target material determine which measurement functions are enabled.
-
Radial shaft vibration
At a bearing measurement plane, the probe can observe relative shaft motion against a conductive target. The monitoring channel interprets that dynamic gap signal within the matched transducer-system range. -
Axial shaft position
A suitable thrust-position arrangement can use the same noncontact sensing principle to follow axial movement. Target travel and probe placement must remain within the documented system range. -
Phase or speed reference
A once-per-turn target can provide a reference signal when the installed monitor and target design support that function. The probe order code alone does not create a Keyphasor channel. -
Installed-system integration
The M8 x 1 mounting and 0.5 m lead identify the physical probe execution. Pair it with the correct extension cable and Proximitor rather than mixing 3300 XL 8 mm and NSv system components.
Installation and commissioning checks for Bently Nevada 330904-00-05-05-01-00. Preserve the exact probe execution and matched transducer-chain length during replacement.
Isolate the measurement
Make the machine and monitoring channel safe before moving the probe. Record the previous gap setting and connector route.
Mounting thread
Confirm the M8 x 1 opening and case length against the installed bracket. Do not force a dissimilar thread or alter the target clearance.
Target geometry
Inspect the conductive target area, maximum shaft travel and adjacent metal before setting the gap. Avoid positions where the tip may contact the target.
Lead and connector
Route the 0.5 m lead without sharp bends, heat exposure or strain at the ClickLoc connector with protector. Keep mating surfaces clean and protect the connection from contamination.
Matched system length
Count the integral lead and extension cable as one transducer-system length. Verify the installed Proximitor family and approved monitor scaling before interpreting voltage.
Commissioning response
Set the static gap under the approved procedure, then check DC gap voltage and dynamic response. Compare the result with the site acceptance limits for the complete channel.
Alternative Names
3309040005050100
Bently Nevada 330904-00-05-05-01-00
Technical notes
Probe configuration: 330904 selects a M8 x 1 armored case with 50 mm overall length and 0.5 m lead.
System boundary: Measurement performance depends on the matched probe, extension cable, Proximitor sensor and target material.
Technical reference: Bently Nevada 3300 XL NSv Proximity Transducer System, 147385 Rev. R.
FAQ View All FAQ
-
What sensing family does 330904-00-05-05-01-00 belong to?It is a 3300 XL NSv probe. It works with a matched extension cable and Proximitor sensor.
-
Which case thread is selected for 330904-00-05-05-01-00?The 330904 part prefix selects a M8 x 1 case thread.
-
Is the lead of 330904-00-05-05-01-00 armored?Yes. The 330904 probe prefix denotes an armored version.
-
How long is the unthreaded portion of 330904-00-05-05-01-00?Option 00 selects 0 mm unthreaded length.
-
What is the overall probe case length of 330904-00-05-05-01-00?Option 05 selects 50 mm overall case length.
-
How long is the integral lead on 330904-00-05-05-01-00?Option 05 selects a 0.5 m probe lead.
-
What connection is supplied with 330904-00-05-05-01-00?Option 01 specifies a clickloc connector with protector; protect the connection during routing and installation.
-
Does 330904-00-05-05-01-00 alone establish the system measurement range?No. The matched 3300 XL NSv probe, extension cable, Proximitor sensor and target calibration establish system performance.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.