With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330902-00-90-10-01-05 is a Bently Nevada 3300 XL NSv series non-contact eddy current proximity probe designed for rotating machinery condition monitoring. The product comprises a 1/4-28 UNF fully threaded stainless steel case, a polyphenylene sulfide tip, a 1.0-meter integral cable, and a miniature ClickLoc coaxial connector. This complete part number represents the 330902 base model, a 0-inch unthreaded length, a 9.0-inch overall case length, a 1.0-meter cable length, a miniature coaxial connector with coaxial cable, and multiple international hazardous area approvals.
Axial (thrust) position measurements
Phase reference (Keyphasor signals)
Tachometer and zero speed measurements
The 3300 XL NSv Proximity Transducer system is intended for use with centrifugal air compressors, refrigeration compressors, process gas compressors, and other machines with tight installation requirements. The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview, or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in).
The 3300 XL NSv Transducer System design allows it to replace both the 3300 RAM Transducer Systems and the 3000-series or 7000-series 190 Transducer System. Upgrades from the 3300 RAM system to the 3300 XL NSv system may use the existing probe, extension cable, and monitoring system with 3300 XL NSv Proximitor Sensor. Upgrades from the 3000-series or 7000-series Transducer System must replace the probe, extension cable, and Proximitor Sensor with NSv components.
The 3300 XL NSv Transducer System has an Average Scale Factor of 7.87 V/mm (200 mV/mil), which is the most common output for eddy current transducers. Its enhanced side view and small target characteristics give it a shorter linear range than the Bently Nevada 3300 XL-series 5 and 8 mm Transducer System. The 1.5 mm (60 mils) of linear range exceeds the linear range of the 3000-series 190 Transducer System.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330902-00-90-10-01-05 Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Power Generation
Measures radial vibration on small gas turbine or auxiliary pump shafts with tight installation requirements.
Oil & Gas
Tracks small-shaft vibration on centrifugal air compressors at offshore platforms or refineries.
Petrochemical
Monitors axial position in tight clearance areas of refrigeration compressors within ethylene plants.
Tracks shaft vibration on high-speed turboexpanders under tight space and sideview restrictions.
During installation, the tightening torque for Bently Nevada 330902-00-90-10-01-05 must be controlled between 5.1 and 7.3 N·m, ensuring adequate physical clearance around the probe to prevent signal interference caused by sideview or counterbore restrictions.
Periodically inspect the tightness of the miniature ClickLoc coaxial connector during operation. Splicing repairs on damaged cables are strictly prohibited; the entire unit must be replaced to maintain the 1.5 mm linear range and system explosion-proof performance.
The 330902-00-90-10-01-05 features a probe tip molded with patented TipLoc technology to ensure a secure bond between the tip and the stainless steel body. The cable connection incorporates a CableLoc design capable of withstanding a continuous tensile load of 220 N or 50 lb. The external stainless steel braided armor determined by the 330902 model delivers mechanical protection against abrasive wear, shearing forces, and structural crushing during field routing and installation.
It is a 3300 XL NSv proximity probe with a 1/4-28 UNF thread, a 9.0-inch body, a 1.0-meter cable, stainless steel armor, and hazardous area approvals.
What is the rated tightening torque when installing 330902-00-90-10-01-05?
The recommended installation torque for the 1/4-28 UNF threads is 5.1 N·m.
What is the core application scenario for 330902-00-90-10-01-05?
It is used for fluid-film bearing machinery with tight clearances, side-view restrictions, or counterbore limitations, such as centrifugal air compressors.
Do you offer global delivery services?
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
What is the standard linear range of this transducer system?
When paired with the dedicated NSv Proximitor, the system's nominal linear range is typically 1.5 mm (60 mils).
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
