Which host hardware must be matched with 330876-01-50-01-05?

Match 330876-01-50-01-05 with the documented 3300 XL 50 mm Proximity Transducer System and the installed 3300 XL 50 mm Proximitor Sensor, matched extension cable when required.

How should the complete 330876-01-50-01-05 identification be verified?

Compare the full marking with the controlling 174014 Rev. L record; the documented probe model is 330876.

Can 330876-01-50-01-05 replace a visually similar part directly?

No direct substitution should be assumed. Match the complete 330876-01-50-01-05 code, interfaces, system length or mounting arrangement, and the approved host configuration.

330876-01-50-01-05 3300 XL 50 mm 1 1/2-20 threaded proximity probe

Name: 330876-01-50-01-05
Brand: Bently Nevada
SKU: 330876-01-50-01-05

330876-01-50-01-05

3300 XL 50 mm 1 1/2-20 threaded proximity probe

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 330876-01-50-01-05

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

330876-01-50-01-05

Estimated shipping dimensions:

22x22x6.5cm

Weight:

0.75 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Probe model:

330876

Probe case:

1 1/2-20 threaded

Total probe length:

5.0 m (16.4 ft)

Probe cable:

High-temperature FluidLoc

Armor:

Stainless-steel

Agency approval option:

Multiple approvals

Probe tip material:

PPS

Probe case material:

AISI 304 stainless steel

Probe cable impedance:

75 Ohm

Power without barriers:

-17.5 to -26 V DC; 12 mA maximum

Power with barriers:

-23 to -26 V DC

Output resistance:

50 Ohm

Field-wire conductor range:

0.2 to 1.5 mm2 (16 to 24 AWG)

Maximum field-wire length:

305 m (1000 ft)

Linear range:

27.9 mm (1100 mils)

Linear-range limits:

1.3 to 29.2 mm (50 to 1150 mils)

Average scale factor:

394 mV/mm (10 mV/mil)

Deviation from straight line:

<+/-0.74 mm (+/-29 mils)

Minimum target diameter:

102 mm (4.0 in)

Extension-cable capacitance:

69.9 pF/m typical

Minimum bend radius:

25.4 mm (1.0 in)

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330876-01-50-01-05 is 3300 xl 50 mm 1 1/2-20 threaded proximity probe. It measures large shaft or rotor displacement without contact and feeds a matched 3300 XL 50 mm Proximitor Sensor and monitoring input.

Uses the documented 1 1/2-20 threaded body
Carries the signal over a 5.0 m (16.4 ft) FluidLoc lead
Provides the large-range 50 mm sensing interface
Operates only as part of a matched 3300 XL 50 mm system

330876-01-50-01-05 operates with 3300 XL 50 mm Proximitor Sensor, matched extension cable when required, 102 mm or larger steel target, compatible displacement monitor.

Engineered applications include Turbine differential expansion, Large axial-position measurement, Valve and rotor travel monitoring, 50 mm transducer-loop renewal.

Important Notice: Confirm the 1 1/2-20 threaded body, 5.0 m (16.4 ft) lead, stainless-steel and multiple approvals; match the probe and extension cable to the Proximitor system length before full-travel calibration.

Apter Power 330876-01-50-01-05 Manuals and Guides

Apter Power 330876-01-50-01-05 System and Technical Reference PDF Bently Nevada 330876-01-50-01-05 Official Engineering Document PDF

The first document provides model-specific technical and system-reference information. The second is the directly related manufacturer document used for installation, configuration and engineering verification.

Turbine differential expansion

Measures large thermal rotor movement.

Large axial-position measurement

Tracks axial position over an extended mechanical travel.

Valve and rotor travel monitoring

Supports differential-expansion protection functions.

50 mm transducer-loop renewal

Restores the exact probe element in a calibrated 50 mm system.

Read the applicable Bently Nevada instructions before work. Verify 330876-01-50-01-05 and the installed 3300 XL 50 mm Proximity Transducer System configuration.

Verify the complete 330876-01-50-01-05 marking and 1 1/2-20 threaded execution before work.

Place the monitored machine and protection channel in the approved maintenance state.

Protect the sensing tip, threads and mounting surface from impact, burrs and contamination.

Route and support the 5.0 m (16.4 ft) lead without sharp bends, crushing, tensile load or contact with moving parts.

Keep coaxial connector faces clean, dry and mechanically unloaded during handling.

Confirm the matched 3300 XL 50 mm electronics, total system length and target material before setting gap.

Preserve the documented probe separation and cable shielding arrangement during installation.

Prove gap voltage, polarity, dynamic response and alarm action before returning the channel to service.

FAQS

What is the documented system role of 330876-01-50-01-05?

330876-01-50-01-05 is 3300 xl 50 mm 1 1/2-20 threaded proximity probe. It measures large shaft or rotor displacement without contact and feeds a matched 3300 XL 50 mm Proximitor Sensor and monitoring input.
Which host hardware must be matched with 330876-01-50-01-05?

Match 330876-01-50-01-05 with the documented 3300 XL 50 mm Proximity Transducer System and the installed 3300 XL 50 mm Proximitor Sensor, matched extension cable when required.
How should the complete 330876-01-50-01-05 identification be verified?

Compare the full marking with the controlling 174014 Rev. L record; the documented probe model is 330876.
What connection check is required before installing 330876-01-50-01-05?

Route and support the 5.0 m (16.4 ft) lead without sharp bends, crushing, tensile load or contact with moving parts.
How should 330876-01-50-01-05 be protected during handling?

Keep coaxial connector faces clean, dry and mechanically unloaded during handling.
What configuration must be restored after replacing 330876-01-50-01-05?

Confirm the matched 3300 XL 50 mm electronics, total system length and target material before setting gap.
What commissioning test is required for 330876-01-50-01-05?

Prove gap voltage, polarity, dynamic response and alarm action before returning the channel to service.
Can 330876-01-50-01-05 replace a visually similar part directly?

No direct substitution should be assumed. Match the complete 330876-01-50-01-05 code, interfaces, system length or mounting arrangement, and the approved host configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

330876-01-50-01-05

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 330876-01-50-01-05

Technical specifications for 330876-01-50-01-05

Information

Information