Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330180-X1-05 MOD:145193-01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330180-X1-05 MOD:145193-01
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330180-X1-05 MOD:145193-01
-
Estimated shipping dimensions:8.8×3.5×7cm
-
Weight:0.25 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Product family:3300 XL 8 mm Proximity Transducer System
-
Component role:Proximitor Sensor
-
Standard family ordering format:330180-AA-BB
-
System components:One 3300 XL 8 mm probe, one extension cable and one Proximitor Sensor
-
Measured values:Static position and dynamic vibration
-
Field wiring:0.2 to 1.5 mm2 (16 to 24 AWG) shielded triad
-
Maximum field-wiring distance:305 m (1,000 ft) from sensor to monitor
-
Sensor output resistance:50 ohm
-
Standard family approval code 05:CSA, ATEX and IECEx approvals
-
Special-code boundary:X1 and MOD:145193-01 require exact nameplate and order-record verification
Information
Overview
Manuals
Common Applications
Product Precautions
The 330180 sensor is the conditioning element of a 3300 XL 8 mm proximity chain, converting probe gap into a voltage signal for the connected monitor.
- Matched probe, extension cable and Proximitor Sensor chain
- Static position and dynamic vibration measurement role
- SpringLoc field-wiring terminal design
- Panel-mount and DIN-rail family mounting arrangements
Use this special-marked sensor only with the approved probe, extension cable, target material and monitor configuration. Preserve the full X1 and MOD:145193-01 identity because the public standard ordering table does not decode those special markings. Record the installed gap voltage and complete an approved monitor-channel acceptance test after service.
Important Notice: Confirm the complete Bently Nevada 330180-X1-05 MOD:145193-01 nameplate and approved ordering record before installation or replacement.
Bently Nevada 330180-X1-05 MOD:145193-01 Manuals & Downloads
Bently Nevada 330180-X1-05 MOD:145193-01 Official 3300 XL Datasheet Excerpt (PDF)Bently Nevada 330180-X1-05 MOD:145193-01 Installation & Commissioning Guide (PDF)
The first document reproduces applicable official manufacturer pages unchanged; the second provides a separate evidence-led installation and commissioning workflow.
Fluid-film bearing vibration
Conditions the matched proximity signal used for radial-vibration monitoring.
Shaft position measurement
Converts probe-to-target distance into a monitor input signal.
Keyphasor and speed reference
Supports approved reference or speed measurements within a documented system.
Controlled sensor replacement
Uses the full special marking and installed chain record to prevent an unsupported substitution.
Read the applicable Bently Nevada instructions before work. Verify 330180-X1-05 MOD:145193-01 and the installed system configuration before isolation or replacement.
1
Record the complete 330180-X1-05 MOD:145193-01 marking and rack channel.
2
Use the approved safe-work and monitoring-system isolation procedure.
3
Identify the connected probe, extension cable, target and monitor before removal.
4
Do not decode X1 or MOD:145193-01 from the standard AA-BB ordering table.
5
Preserve cable routing, shielding, connector protection and grounding.
6
Verify the installed supply and field-wiring arrangement before reconnection.
7
Restore the documented gap voltage and monitor-channel configuration.
8
Complete a controlled vibration, position or reference-channel acceptance test.
Technical notes
Use this special-marked sensor only with the approved probe, extension cable, target material and monitor configuration. Preserve the full X1 and MOD:145193-01 identity because the public standard ordering table does not decode those special markings. Record the installed gap voltage and complete an approved monitor-channel acceptance test after service.
FAQ View All FAQ
-
What role does Bently Nevada 330180-X1-05 MOD:145193-01 perform?Bently Nevada 330180-X1-05 MOD:145193-01 performs the Proximitor Sensor role in a matched 3300 XL 8 mm proximity transducer system.
-
Which transducer family includes 330180-X1-05 MOD:145193-01?The complete special marking belongs to the published 330180 Proximitor Sensor family for the 3300 XL 8 mm system.
-
Which components form the system used with 330180-X1-05 MOD:145193-01?The system uses one 3300 XL 8 mm probe, one matching extension cable and one Proximitor Sensor.
-
What does the output from 330180-X1-05 MOD:145193-01 represent?The sensor output is proportional to the distance between the probe tip and the observed conductive target, allowing static and dynamic measurements.
-
Which field wiring is documented for the 330180 family?The published family data specifies 0.2 to 1.5 mm2 shielded triad wiring and permits as much as 305 m between the Proximitor Sensor and monitor.
-
Can the standard 330180 ordering table decode X1 in 330180-X1-05 MOD:145193-01?No. The public standard table defines numeric AA mounting and length codes, so X1 must be verified from the exact nameplate and approved special-order record.
-
Why must MOD:145193-01 remain attached to 330180-X1-05?MOD:145193-01 is part of the complete installed identity and prevents the special-marked unit from being treated as an ordinary standard-code sensor.
-
What confirms commissioning of 330180-X1-05 MOD:145193-01?Commissioning is complete only after the approved supply, gap voltage, monitor configuration, diagnostics and affected measurement function have passed controlled checks.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.