Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330130-075-01-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330130-075-01-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330130-075-01-00
-
Estimated shipping dimensions:20×20×2.5cm
-
Weight:0.25 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Cable family:3300 XL standard extension cable
-
Cable length:7.5 m
-
Construction:Armored standard cable
-
Connector protector:Not included
-
Approval option:Not required
-
System rule:Probe plus extension cable equals Proximitor electrical length
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330130-075-01-00 supplies the 7.5 m armored section between a compatible probe lead and Proximitor sensor.
- Provides the documented 7.5 m extension-cable length.
- Uses armored standard cable for added mechanical protection.
- Completes the calibrated coaxial path between probe and Proximitor sensor.
- Uses ClickLoc connections without the protector option.
The extension cable is an electrical component of the calibrated transducer system. Its length and family must agree with both the probe and the Proximitor sensor.
Important Notice: Verify the complete 330130-075-01-00 identifier and installed system length before replacement. Record gap voltage and dynamic response after the full signal chain is restored.
Bently Nevada 330130-075-01-00 Manuals & Downloads
Bently Nevada 330130-075-01-00 Official Technical Reference Excerpt (PDF)Bently Nevada 330130-075-01-00 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Matched electrical-length completion
Completes the probe-to-Proximitor path where a 7.5 m extension section is required.
Machinery vibration channels
Carries the proximity signal between the probe lead and the matched signal conditioner.
Position monitoring
Maintains the calibrated cable path used for static shaft-position measurements.
Maintenance replacement
Restores a damaged extension segment without changing the specified system length.
Before installing Bently Nevada 330130-075-01-00, confirm the documented system, interfaces and controlled configuration.
1
Verify the complete 330130-075-01-00 identifier and installed system length before replacement.
2
Confirm the required cable construction is Armored standard cable.
3
Do not shorten, splice or field-repair the calibrated coaxial cable.
4
Clean and inspect both ClickLoc mating surfaces before connection.
5
Route the cable with strain relief and protect it from abrasion, hot surfaces and moving hardware.
6
Keep probe, extension-cable and Proximitor family components matched as one calibrated system.
7
Check connector engagement and cable continuity before energizing the monitoring channel.
8
Record gap voltage and dynamic response after the full signal chain is restored.
Technical notes
Verify the complete 330130-075-01-00 identifier and installed system length before replacement. Record gap voltage and dynamic response after the full signal chain is restored.
FAQ View All FAQ
-
What cable length is built into 330130-075-01-00?The 075 option specifies 7.5 m.
-
Why does 330130-075-01-00 use option 01?Option 01 selects armored standard cable.
-
Which transducer family accepts 330130-075-01-00?It is a 3300 XL standard extension cable used with matched 8 mm or documented 5 mm systems.
-
Which connector-protection accessory is omitted by cable option 01 on 330130-075-01-00?No. Cable option 01 is armored cable without the protector.
-
What approval execution is present on 330130-075-01-00?Code 00 means the agency-approval option is not required.
-
How does 330130-075-01-00 affect total electrical length?Its 7.5 m length must combine with the probe lead to equal the Proximitor system length.
-
Can 330130-075-01-00 be shortened to fit?No. Shortening or splicing changes the calibrated electrical path.
-
Which post-installation reading is most useful for 330130-075-01-00?Compare the restored gap voltage and dynamic response with the channel baseline.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.