Which host hardware must be matched with 330106-05-30-10-02-IN?

Match 330106-05-30-10-02-IN with the documented 3300 XL 8 mm Proximity Transducer System and the installed 3300 XL 8 mm Proximitor Sensor, matched extension cable when required.

How should the complete 330106-05-30-10-02-IN identification be verified?

Compare the full marking with the controlling 141194 Rev. AM record; the documented probe model is 330106.

Can 330106-05-30-10-02-IN replace a visually similar part directly?

No direct substitution should be assumed. Match the complete 330106-05-30-10-02-IN code, interfaces, system length or mounting arrangement, and the approved host configuration.

330106-05-30-10-02-IN 3300 XL 8 mm M10 x 1 reverse-mount proximity probe

Name: 330106-05-30-10-02-IN
Brand: Bently Nevada
SKU: 330106-05-30-10-02-IN

330106-05-30-10-02-IN

3300 XL 8 mm M10 x 1 reverse-mount proximity probe

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 330106-05-30-10-02-IN

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

330106-05-30-10-02-IN

Estimated shipping dimensions:

1.1x0.9x102cm

Weight:

0.05 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Probe model:

330106

Mounting:

Reverse mount

Probe thread:

M10 x 1

Fixed geometry code:

05-30

Total probe length:

1.0 m (3.3 ft)

Connector:

Miniature coaxial ClickLoc

Probe cable:

Standard

Approval suffix:

Power without barriers:

-17.5 to -26 V DC; 12 mA maximum

Power with barriers:

-23 to -26 V DC

Supply sensitivity:

<2 mV/V

Output resistance:

50 Ohm

Field-wire conductor range:

0.2 to 1.5 mm2 (16 to 24 AWG)

Maximum field-wire length:

305 m (1000 ft)

Linear range:

2.0 mm (80 mils)

Linear-range limits:

0.25 to 2.30 mm (10 to 90 mils)

Recommended radial-vibration gap:

-9 V DC; approximately 1.27 mm (50 mils)

Incremental scale factor:

7.87 V/mm (200 mV/mil)

Frequency response:

0 to 10 kHz; +0/-3 dB

Extension-cable capacitance:

69.9 pF/m typical

Minimum bend radius:

25.4 mm (1.0 in)

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330106-05-30-10-02-IN is 3300 xl 8 mm m10 x 1 reverse-mount proximity probe. It senses shaft-to-probe displacement and supplies the non-contact eddy-current input to a matched 3300 XL 8 mm monitoring loop.

Uses the documented M10 x 1 reverse-mount geometry
Carries the sensing signal over a one-metre probe lead
Terminates in a miniature ClickLoc connection
Forms the probe element of a matched 3300 XL 8 mm system

330106-05-30-10-02-IN operates with 3300 XL 8 mm Proximitor Sensor, matched extension cable when required, AISI 4140 steel target, compatible Bently Nevada monitor channel.

Engineered applications include Reverse-mount radial vibration, Axial position sensing, Bearing-housing probe installation, Matched 8 mm loop renewal.

Important Notice: Confirm the M10 x 1 reverse-mount sleeve, one-metre lead, IN approval marking and complete matched system length before mechanical adjustment and gap verification.

Apter Power 330106-05-30-10-02-IN Manuals and Guides

Apter Power 330106-05-30-10-02-IN System and Technical Reference PDF Bently Nevada 330106-05-30-10-02-IN Official Engineering Document PDF

The first document provides model-specific technical and system-reference information. The second is the directly related manufacturer document used for installation, configuration and engineering verification.

Reverse-mount radial vibration

Measures shaft motion where rear-access probe mounting is engineered.

Axial position sensing

Tracks thrust movement without mechanical contact.

Bearing-housing probe installation

Routes the probe lead through the installed sleeve arrangement.

Matched 8 mm loop renewal

Restores the exact reverse-mount sensing element in an 8 mm loop.

Read the applicable Bently Nevada instructions before work. Verify 330106-05-30-10-02-IN and the installed 3300 XL 8 mm Proximity Transducer System configuration.

Verify the complete 330106-05-30-10-02-IN marking and M10 x 1 reverse-mount execution before work.

Place the monitored machine and protection channel in the approved maintenance state.

Protect the sensing tip, threads and mounting surface from impact, burrs and contamination.

Route and support the 1.0 m lead without sharp bends, crushing, tensile load or contact with moving parts.

Keep coaxial connector faces clean, dry and mechanically unloaded during handling.

Confirm the matched 3300 XL 8 mm electronics, total system length and target material before setting gap.

Preserve the documented probe separation and cable shielding arrangement during installation.

Prove gap voltage, polarity, dynamic response and alarm action before returning the channel to service.

FAQS

What is the documented system role of 330106-05-30-10-02-IN?

330106-05-30-10-02-IN is 3300 xl 8 mm m10 x 1 reverse-mount proximity probe. It senses shaft-to-probe displacement and supplies the non-contact eddy-current input to a matched 3300 XL 8 mm monitoring loop.
Which host hardware must be matched with 330106-05-30-10-02-IN?

Match 330106-05-30-10-02-IN with the documented 3300 XL 8 mm Proximity Transducer System and the installed 3300 XL 8 mm Proximitor Sensor, matched extension cable when required.
How should the complete 330106-05-30-10-02-IN identification be verified?

Compare the full marking with the controlling 141194 Rev. AM record; the documented probe model is 330106.
What connection check is required before installing 330106-05-30-10-02-IN?

Route and support the 1.0 m lead without sharp bends, crushing, tensile load or contact with moving parts.
How should 330106-05-30-10-02-IN be protected during handling?

Keep coaxial connector faces clean, dry and mechanically unloaded during handling.
What configuration must be restored after replacing 330106-05-30-10-02-IN?

Confirm the matched 3300 XL 8 mm electronics, total system length and target material before setting gap.
What commissioning test is required for 330106-05-30-10-02-IN?

Prove gap voltage, polarity, dynamic response and alarm action before returning the channel to service.
Can 330106-05-30-10-02-IN replace a visually similar part directly?

No direct substitution should be assumed. Match the complete 330106-05-30-10-02-IN code, interfaces, system length or mounting arrangement, and the approved host configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

330106-05-30-10-02-IN

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 330106-05-30-10-02-IN

Technical specifications for 330106-05-30-10-02-IN

Information

Information