Which Bently Nevada components must be matched with 330104-11-25-10-02-00?

Use 330104-11-25-10-02-00 only with the documented 3300 XL 8 mm Proximity Transducer System arrangement, including 3300 XL 8 mm Proximitor Sensor, Compatible 3300 XL extension cable, AISI 4140 target surface.

How should the complete 330104-11-25-10-02-00 order code be checked before installation?

Compare every suffix with the nameplate and the controlling 141194 Rev. AM ordering table; the documented probe model is 330104.

Can 330104-11-25-10-02-00 directly replace another Bently Nevada part number?

Do not assume direct substitution. Match the complete 330104-11-25-10-02-00 code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.

Bently Nevada 330104-11-25-10-02-00 3300 XL 8 mm M10 x 1 armored proximity probe

Name: 330104-11-25-10-02-00
Brand: Bently Nevada
SKU: 330104-11-25-10-02-00

330104-11-25-10-02-00

3300 XL 8 mm M10 x 1 armored proximity probe

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 330104-11-25-10-02-00

Manufacturer:

Bently Nevada

Product Category:

Machinery Monitoring System

Spare Part Number:

330104-11-25-10-02-00

Estimated shipping dimensions:

1.7x1.5x116cm

Weight:

0.15 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Probe model:

330104

Probe thread:

M10 x 1

Armor:

Yes

Unthreaded length:

110 mm

Overall case length:

250 mm

Total probe length:

1.0 m (3.3 ft)

Connector:

Miniature coaxial ClickLoc

Probe cable:

Standard

Agency approval option:

Not required

Probe DC resistance:

7.59 +/-0.50 Ohm

Power without barriers:

-17.5 to -26 V DC; 12 mA maximum

Power with barriers:

-23 to -26 V DC

Supply sensitivity:

<2 mV/V

Output resistance:

50 Ohm

Field-wire conductor range:

0.2 to 1.5 mm2 (16 to 24 AWG)

Maximum field-wire length:

305 m (1000 ft)

Linear range:

2.0 mm (80 mils)

Linear-range limits:

0.25 to 2.30 mm (10 to 90 mils)

Recommended radial-vibration gap:

-9 V DC; approximately 1.27 mm (50 mils)

Incremental scale factor:

7.87 V/mm (200 mV/mil)

Frequency response:

0 to 10 kHz; +0/-3 dB

Extension-cable capacitance:

69.9 pF/m typical

Information

Overview Manuals Common Applications Product Precautions

Bently Nevada 330104-11-25-10-02-00 is 3300 xl 8 mm m10 x 1 armored proximity probe. It measures shaft displacement without contact and feeds the matched 3300 XL 8 mm Proximitor Sensor through its one-metre lead.

Uses an M10 x 1 armored metric probe body
Combines a 250 mm case with 110 mm unthreaded length
Provides a 1.0 m standard probe cable
Supports the documented 2 mm 3300 XL linear span

330104-11-25-10-02-00 operates with 3300 XL 8 mm Proximitor Sensor, Compatible 3300 XL extension cable, AISI 4140 target surface, Bently Nevada monitor channel.

Engineered applications include Long-case radial vibration, Axial position monitoring, Deep-bracket probe mounting, Metric 8 mm loop renewal.

Important Notice: Verify the 110 mm unthreaded length, 250 mm case and bracket clearance; match the one-metre lead to the complete 3300 XL system length.

Apter Power 330104-11-25-10-02-00 Manuals and Guides

Apter Power 330104-11-25-10-02-00 Product Technical Reference PDF Bently Nevada 330104-11-25-10-02-00 Official System Manual PDF

The first document is a model-specific technical reference. The second is the directly related Bently Nevada system document used for installation and engineering verification.

Long-case radial vibration

Reaches a shaft through a deep metric mounting bracket.

Axial position monitoring

Measures thrust motion over the standard 8 mm span.

Deep-bracket probe mounting

Supports protected routing from a long probe case.

Metric 8 mm loop renewal

Replaces a documented metric armored probe without changing the calibrated loop.

Read the applicable Bently Nevada installation instructions before work. Verify 330104-11-25-10-02-00 and the installed 3300 XL 8 mm Proximity Transducer System configuration.

Verify the complete 330104-11-25-10-02-00 marking, M10 x 1 armored construction and assigned measuring point before work.

Place the monitored machine and its protection channel in the approved maintenance state before disturbing the probe.

Protect the probe tip and M10 x 1 armored interface from impact, burrs, contamination and unintended side-view metal.

Route and support the 1.0 m probe lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.

Keep every ClickLoc interface clean, dry and fully engaged; preserve connector-protector hardware where supplied.

Confirm the matched 3300 XL 8 mm Proximitor Sensor, total system length and target material before setting the static gap.

Maintain the documented probe-tip separation where adjacent channels could create cross-talk.

Prove gap voltage, polarity, dynamic response and alarm action before returning the protection channel to service.

FAQS

What exact system function does 330104-11-25-10-02-00 provide?

330104-11-25-10-02-00 is 3300 xl 8 mm m10 x 1 armored proximity probe. It measures shaft displacement without contact and feeds the matched 3300 XL 8 mm Proximitor Sensor through its one-metre lead.
Which Bently Nevada components must be matched with 330104-11-25-10-02-00?

Use 330104-11-25-10-02-00 only with the documented 3300 XL 8 mm Proximity Transducer System arrangement, including 3300 XL 8 mm Proximitor Sensor, Compatible 3300 XL extension cable, AISI 4140 target surface.
How should the complete 330104-11-25-10-02-00 order code be checked before installation?

Compare every suffix with the nameplate and the controlling 141194 Rev. AM ordering table; the documented probe model is 330104.
What installation detail is critical for 330104-11-25-10-02-00?

Protect the probe tip and M10 x 1 armored interface from impact, burrs, contamination and unintended side-view metal.
What wiring or connector checks are required for 330104-11-25-10-02-00?

Route and support the 1.0 m probe lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.
How should 330104-11-25-10-02-00 be configured with its monitoring channel?

Confirm the matched 3300 XL 8 mm Proximitor Sensor, total system length and target material before setting the static gap.
What commissioning test should be performed after installing 330104-11-25-10-02-00?

Prove gap voltage, polarity, dynamic response and alarm action before returning the protection channel to service.
Can 330104-11-25-10-02-00 directly replace another Bently Nevada part number?

Do not assume direct substitution. Match the complete 330104-11-25-10-02-00 code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

330104-11-25-10-02-00

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 330104-11-25-10-02-00

Technical specifications for 330104-11-25-10-02-00

Information

Information