With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330104-00-10-05-12-05 is an industrial-grade, standard-mount, explosion-proof eddy current proximity probe belonging to the premier 3300 XL 8 mm transducer system. It features a standard 3/8-24 UNF fully threaded case (0.0 in unthreaded length, 1.0 in overall case length), an integrated 0.5-meter cable with a miniature ClickLoc coaxial connector, and a fluid-resistant stainless steel armor for robust physical shielding.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability.
All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components. Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330104-00-10-05-12-05 Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas Extraction Industry
Used in large main centrifugal gas compressors on offshore production platforms or onshore gas fields to monitor the radial vibration of the main shaft via non-contact means within explosive gas hazardous zones.
Petroleum Refining Industry
Deployed on the bearings of heavy oil hydrocracking recycle hydrogen compressors, which are critical to hydrogenation reaction units, to continuously monitor axial displacement and prevent deviations beyond safety limits.
Coal Chemical & Syngas Industry
Used in large high-pressure multistage centrifugal oxygen compressors in coal gasification plants, where its stainless steel armor protects the cable from corrosive chemical fluid vapors in the machinery room.
Nuclear Power Generation
Deployed on the bearings of high-power boiler feed pump turbines in the conventional island of nuclear power plants to continuously measure static shaft displacement and assess thrust bearing wear.
Iron & Steel Metallurgy Industry
Used for blast furnace centrifugal blowers, the power source of large blast furnaces, utilizing the 8 mm probe's standard linear range to monitor fan rotor shaft vibration in real-time within high-temperature, high-dust environments.
Mining & Heavy Mineral Processing
Used at the main gear transmission box bearings of heavy-duty SAG mills and large exhaust fans in mineral processing plants, where the integrated 0.5m stainless steel armored cable withstands high-flying debris and physical abrasion.
Operation must strictly follow intrinsically safe wiring codes (-05 approval) and ensure the probe, extension cable, and Proximitor form a matched 5-meter or 9-meter system to maintain measurement accuracy.
Because it features an integrated stainless steel armored cable (-12 configuration), a proper bending radius must be maintained during routing, heavy twisting, crushing, or over-pulling the armor is strictly prohibited to prevent damaging the internal coaxial core. During installation, the measurement gap must be precisely set by continuously monitoring the Proximitor’s output bias voltage (typically calibrated to -10 VDC).
Additionally, maintain a waterproof and oil-proof seal at the connectors, and perform all installation, adjustment, or locking activities only when the machinery is at a complete standstill.
Bently Nevada 330104-00-10-05-12-05 is authorized for direct deployment in explosive industrial zones. Utilizing a non-contact eddy current principle, this probe performs micron-level precise measurements of shaft vibration, axial displacement, and Keyphasor speed references on fluid-film bearing machines. The system fully complies with the API 670 Standard for mechanical configuration, linear accuracy, and temperature stability, serving as a critical asset protection and emergency shutdown component for heavy plant machinery.
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
What kind of device is Bently Nevada 330104-00-10-05-12-05?
It is an industrial-grade, non-contact eddy current proximity probe belonging to the Bently Nevada 3300 XL 8 mm transducer system, featuring a standard 3/8-24 UNF threaded case.
What is the primary purpose of 330104-00-10-05-12-05?
It is utilized for micron-level precise online monitoring of shaft vibration, axial displacement, rotational speed, and Keyphasor references on large industrial rotating machinery such as steam turbines, fans, and compressors.
How do you correctly install and use the 330104-00-10-05-12-05 probe?
It must be installed while the machinery is completely at rest by threading the probe into a mounting bracket and precisely adjusting the micron-level physical gap between the probe tip and the shaft surface by monitoring the paired Proximitor's output bias voltage with a multimeter.
What components must be assembled with 330104-00-10-05-12-05 to form a complete measurement loop?
It must be connected to a 3300 XL extension cable and a 3300 XL Proximitor Sensor, and the combined length of the probe and extension cable must strictly match the Proximitor’s requirements (typically 5 meters or 9 meters).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
