• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      330103-04-10-10-02-05

      Proximity Probe
      Ships by Sunday, November 8
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Bently Nevada 330103-04-10-10-02-05 is an unarmored 3300 XL 8 mm proximity probe with a M10 x 1 mounting thread and 1.0 m total probe length. Its standard cable terminates in a miniature ClickLoc connector without a factory-installed connector protector.
      • Manufacturer part number
        330103-04-10-10-02-05
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        1.8cm x 1.5cm x 119cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for 330103-04-10-10-02-05
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Send the complete 330103-04-10-10-02-05 reference, label and connector photos, required quantity and installed system electrical length.

      • 1

        Confirm the offer

        Review the offered M10 x 1 probe configuration, 1.0 m cable, connector protection, condition and included items.

      • 2

        Arrange dispatch

        Confirm the quantity, dispatch date, lead-time start and delivery details for 330103-04-10-10-02-05 in the quotation.

      • Match the complete marking

        Match the complete 330103-04-10-10-02-05 marking, case geometry, cable length and connector arrangement to the installed measurement position.

      • Check the offered item before ordering

        Request available label and connector photos. Have your maintenance team compare the offered 330103-04-10-10-02-05 with the installed equipment and applicable Bently Nevada documentation.

      Technical specifications for 330103-04-10-10-02-05

      • Manufacturer:
        Bently Nevada
      • Product Category:
        Machinery Monitoring Systems
      • Spare Part Number:
        330103-04-10-10-02-05
      • Weight:
        0.08 kg
      • Tariff Code:
        8537101190
      • Measurement principle:
        Non-contact eddy current
      • Mounting thread:
        M10 x 1
      • Total probe length:
        1.0 m
      • Cable impedance:
        75 ohm triaxial
      • Cable insulation:
        FEP, standard cable
      • Probe tip material:
        PPS
      • Probe case material:
        AISI 303 or 304 stainless steel
      • Nominal probe DC resistance:
        7.59 ± 0.50 ohm, center to outer conductor
      • Standard probe temperature:
        -52°C to +177°C
      • Matched-system nominal scale factor:
        7.87 V/mm
      • Matched-system linear range:
        2 mm under specified calibration conditions
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • Bently Nevada 330103-04-10-10-02-05 combines a long metric case with a smooth nose section for installations that require clearance ahead of the threaded support. Position and vibration information comes from the complete calibrated transducer chain.
      Mounting interface: M10 x 1; unarmored probe construction
      Electrical length: 1.0 m total probe cable
      Connection: ClickLoc connector without factory protector
      The selected case has a M10 x 1 mounting thread, 100 mm overall length and 40 mm unthreaded section. Its standard 75-ohm triaxial cable uses FEP insulation. The miniature coaxial ClickLoc connection is supplied without a factory-installed connector protector; it is separate from the case mounting interface.

      The 1.0 m total probe length must be included in the complete electrical-length calculation. A compatible extension and Proximitor Sensor must form the selected 3300 XL 8 mm system; connector fit alone does not establish calibration.

      The complete matched system provides a nominal 7.87 V/mm scale factor and a 2 mm linear measurement range. Radial-vibration setup uses approximately 1.27 mm gap, corresponding to -9 VDC under the specified AISI 4140 steel calibration conditions. Target material and geometry, component temperatures and the signal-conditioning configuration remain part of the measurement specification.
      Controller platform reference: 3300 XL 8 mm transducer system. Match electrical length, target material and installation conditions.
      The original technical excerpt covers 3300 XL 8 mm probe construction, electrical behavior and system limits relevant to 330103-04-10-10-02-05. The separate installation guide covers M10 x 1 mounting, the 1.0 m cable arrangement and measured system response.
      Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
      System and supply context: 330103-04-10-10-02-05 is one sensing element in a matched 3300 XL 8 mm transducer system. The probe configuration is M10 x 1 with 1.0 m total length; the Proximitor Sensor, extension cable when needed and mounting accessories are separate items unless listed.

      Application scope: The applications below concern the complete calibrated measurement chain. Target material, physical clearance and monitor configuration determine suitability for each machine position.
      Prepare Bently Nevada 330103-04-10-10-02-05 for its configured installation using these checks.
      Mounting engagement

      Limit M10 x 1 thread engagement to 15 mm. Case length does not increase this limit.

      Electrical matching

      The 1.0 m total probe length must be included in the complete electrical-length calculation. A compatible extension and Proximitor Sensor must form the selected 3300 XL 8 mm system; connector fit alone does not establish calibration.

      Connection insulation

      The ClickLoc connector is supplied without a factory-installed connector protector. Prevent contact with surrounding conductive surfaces.

      Temperature boundaries

      Apply the probe temperature limit separately from the lower Proximitor operating-temperature limit.

      Target calibration

      Verify target material and geometry. AISI 4140 steel is the reference calibration target.

      Commissioning response

      Check actual DC gap and response to controlled displacement before restoring protection.

      Alternative Names

      330103-04-10-10-02-05 Bently Nevada 330103-04-10-10-02-05

      Technical notes

      System relationship: The 1.0 m total probe length must be included in the complete electrical-length calculation. A compatible extension and Proximitor Sensor must form the selected 3300 XL 8 mm system; connector fit alone does not establish calibration.

      Connection protection: The standard ClickLoc connection is supplied without a factory-installed connector protector. Keep connector insulation, mechanical support and pressure containment separate.

      Calibration boundary: The complete matched system provides a nominal 7.87 V/mm scale factor and a 2 mm linear measurement range. Radial-vibration setup uses approximately 1.27 mm gap, corresponding to -9 VDC under the specified AISI 4140 steel calibration conditions.

      FAQ View All FAQ

      • How are the unthreaded and overall case lengths selected on 330103-04-10-10-02-05?
        The 04 field selects 40 mm unthreaded length and the 10 field selects 100 mm overall case length. These values define the mechanical case, not the total electrical cable length.
      • Does 330103-04-10-10-02-05 provide a FluidLoc cable barrier?
        No. Connector-and-cable option 02 is standard cable. FluidLoc is a different cable selection; standard FEP insulation must not be described as a fluid-blocking option.
      • What material forms the sensing tip on 330103-04-10-10-02-05?
        The probe tip is polyphenylene sulfide, or PPS. The case uses AISI 303 or 304 stainless steel, and the standard cable uses FEP insulation.
      • What should be checked if 330103-04-10-10-02-05 must operate near another probe?
        Conductive surfaces and adjacent probe fields can affect the measurement. Verify the target geometry and probe spacing for the installation rather than assuming that separate electrical channels eliminate interaction.
      • Can a probe gap near zero use the nominal scale factor of 330103-04-10-10-02-05?
        No. The nominal linear range starts at approximately 0.25 mm from the target. Operation outside the specified linear range cannot use the same proportional conversion without qualification.
      • Which component supplies excitation and conditioning for 330103-04-10-10-02-05?
        A compatible Proximitor Sensor excites and conditions the probe signal. The passive probe is not connected directly to a normal voltage-input channel as though it were a self-contained transmitter.
      • Does the 330103-04-10-10-02-05 approval selection replace an installation assessment?
        No. Applicable hazardous-area use depends on the actual unit markings, temperature class, associated equipment and approved installation arrangement. A selected approval option does not authorize every location or circuit.
      • When is the pressure-sealing capability of 330103-04-10-10-02-05 restricted by temperature?
        The probe pressure seal is not rated below -34°C. This restriction is separate from the wider electrical operating-temperature range and matters where the probe forms a pressure boundary.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.