Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330903-00-07-10-01-CN
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330903-00-07-10-01-CN
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330903-00-07-10-01-CN
-
Estimated shipping dimensions:1.3x1.1x65cm
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe thread:M8 x 1
-
Armor:None
-
Unthreaded length:0 mm
-
Overall case length:70 mm
-
Total length:1.0 m
-
Connector option:Standard ClickLoc with protector
-
Country option:CN
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330903-00-07-10-01-CN is an unarmored M8 x 1 NSv probe with 0 mm unthreaded length, 70 mm case, 1.0 m total length and a protected standard ClickLoc connector. Its CN suffix is a country-specific ordering option listed in the manufacturer approval guide.
- Country-specific CN order option
- Unarmored 70 mm metric case
- 1.0 m lead with ClickLoc connection
- NSv 1.5 mm linear-range family
Match 330903-00-07-10-01-CN to the approved installed location and retain the country-specific marking during inspection. Complete the loop only with compatible NSv cable and sensor components of the documented total system length.
Important Notice: Confirm quotation scope, physical marking, included accessories and installed-system compatibility before work.
Apter Power 330903-00-07-10-01-CN Manuals and Guides
Apter Power 330903-00-07-10-01-CN Product Technical ReferenceBently Nevada 3300 XL NSv Proximity Transducer System Datasheet 147385 Rev. R
Important Notice: The first document is an Apter Power model-specific technical reference; the second link is the unmodified official manufacturer publication.
Country-specific replacement
Restores an exact CN-suffix NSv probe identity.
Compact compressor sensing
Supports documented tight-access shaft measurements.
Phase-reference channel
Provides a compatible NSv probe for Keyphasor service.
Static shaft-position channel
Supports non-contact position measurement on a verified target.
Read the applicable Bently Nevada documentation before work. Verify 330903-00-07-10-01-CN from the physical marking and the installed system record.
1
Record the complete 330903-00-07-10-01-CN code and approval marking.
2
Confirm the CN option is acceptable for the installed jurisdiction and area classification.
3
Keep the 70 mm case within the available mounting clearance.
4
Limit M8 x 1 thread engagement to 12 mm and use the manufacturer torque values.
5
Do not route the 1.0 m lead below its 25.4 mm minimum bend radius.
6
Keep the supplied connector protector in place until the connection is clean and ready.
7
Verify target material and geometry before relying on the standard scale factor.
8
Document gap voltage, channel response and approval evidence before return to service.
Technical notes
Match 330903-00-07-10-01-CN to the approved installed location and retain the country-specific marking during inspection. Complete the loop only with compatible NSv cable and sensor components of the documented total system length.
FAQ View All FAQ
-
What does the CN ending on 330903-00-07-10-01-CN require the engineer to verify?It is a country-specific ordering option; verify the exact approval marking and its suitability for the installed jurisdiction.
-
Is the mechanical build of 330903-00-07-10-01-CN metric or English?It is the unarmored metric M8 x 1 probe configuration.
-
How much unthreaded case is ordered on 330903-00-07-10-01-CN?The A code is 00, specifying 0 mm unthreaded length.
-
Why should the connector cap remain on 330903-00-07-10-01-CN during routing?The 01 option supplies the protector so the ClickLoc connection can remain protected until mating.
-
What shaft diameter is preferred for normal use of 330903-00-07-10-01-CN?A 30 mm minimum shaft is specified for normal applications; smaller shafts require the documented axial-offset arrangement.
-
Which frequency band must the channel preserve for 330903-00-07-10-01-CN?The NSv system response is published from 0 to 10 kHz, subject to the stated tolerance.
-
Can 330903-00-07-10-01-CN be calibrated from a nearby probe record?No. Verify the installed target material and use the matched NSv system documentation for this exact loop.
-
Which compressor installations are cited for 330903-00-07-10-01-CN?The NSv family is intended for small-target applications including centrifugal, refrigeration and process-gas compressors.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.