Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330103-00-16-10-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330103-00-16-10-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330103-00-16-10-02-00
-
Estimated shipping dimensions:1.7x1.5x109cm
-
Weight:0.1 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Transducer family:3300 XL 8 mm
-
Measurement principle:Non-contact eddy current
-
Mounting thread:M10 x 1
-
Probe case selection:0 mm unthreaded length and 160 mm case length
-
Integral lead:1.0 m
-
Termination:Miniature ClickLoc coaxial connector with standard cable
-
System scale factor:7.87 V/mm (200 mV/mil) in a matched system
-
System rule:Probe plus extension cable must match Proximitor electrical length
Information
Overview
Manuals
Common Applications
Product Precautions
The probe places an 8 mm eddy-current sensing tip at the machine measurement point with a 0 mm unthreaded length and 160 mm case length case configuration and a 1.0 m integral lead.
- Uses a M10 x 1 unarmored probe case.
- Provides the specified 0 mm unthreaded length and 160 mm case length case selection.
- Terminates the 1.0 m lead with a miniature ClickLoc connector.
- Works as one calibrated element of the 3300 XL 8 mm transducer system.
Use 330103-00-16-10-02-00 only in the specified monitoring chain and verify the complete signal path after controlled replacement.
Important Notice: Capture the installed 330103-00-16-10-02-00 interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
Bently Nevada 330103-00-16-10-02-00 Manuals & Downloads
Bently Nevada 330103-00-16-10-02-00 Technical Reference Excerpt (PDF)Bently Nevada 330103-00-16-10-02-00 Installation & Commissioning Guide (PDF)The first PDF covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance test results.
Radial vibration
Measures shaft motion relative to the bearing.
Axial position
Tracks non-contact shaft displacement.
Keyphasor service
Provides a once-per-turn reference when configured.
Machine commissioning
Supports gap and dynamic-response checks.
Before installing Bently Nevada 330103-00-16-10-02-00, confirm the specified system, interfaces and controlled configuration.
1
Confirm the complete 330103-00-16-10-02-00 marking and the specified 3300 xl 8 mm proximity probe position.
2
Place the affected machine protection channel in the approved maintenance state.
3
Capture the installed transducer family, measurement principle and mounting thread before removal.
4
De-energize the associated monitor, sensor supply or field circuit as the procedure requires.
5
Label every connector, conductor and shield before separation.
6
Inspect mating contacts, mounting hardware and cable condition before installation.
7
Restore the retained configuration and verify signal polarity and proportional response.
8
Function-test the complete alarm, indication and shutdown path before returning the machine to service.
Technical notes
Capture the installed 330103-00-16-10-02-00 interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
FAQ View All FAQ
-
Which transducer family does Bently Nevada 330103-00-16-10-02-00 belong to?Bently Nevada 330103-00-16-10-02-00 belongs to the 3300 XL 8 mm family.
-
How does Bently Nevada 330103-00-16-10-02-00 implement its measurement principle?Its measurement principle is Non-contact eddy current.
-
What is the mounting thread of Bently Nevada 330103-00-16-10-02-00?The mounting thread is M10 x 1.
-
What probe case selection applies to Bently Nevada 330103-00-16-10-02-00?The probe case selection is 0 mm unthreaded length and 160 mm case length.
-
What integral lead applies to Bently Nevada 330103-00-16-10-02-00?The integral lead is 1.0 m.
-
How does Bently Nevada 330103-00-16-10-02-00 implement its termination?Its termination is Miniature ClickLoc coaxial connector with standard cable.
-
What is the system scale factor of Bently Nevada 330103-00-16-10-02-00?The system scale factor is 7.87 V/mm (200 mV/mil) in a matched system.
-
What system rule applies to Bently Nevada 330103-00-16-10-02-00?The system rule is Probe plus extension cable must match Proximitor electrical length.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.