• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      330101-00-75-10-02-00

      Proximity Probe
      Ships by Sunday, November 8
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Bently Nevada 330101-00-75-10-02-00 is an unarmored 3300 XL 8 mm proximity probe with a 3/8-24 UNF mounting thread and 1.0 m total probe length. Its standard cable terminates in a miniature ClickLoc connector without a factory-installed connector protector.
      • Manufacturer part number
        330101-00-75-10-02-00
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        1.6cm x 1.4cm x 112cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for 330101-00-75-10-02-00
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Send the complete 330101-00-75-10-02-00 reference, label and connector photos, required quantity and installed system electrical length.

      • 1

        Confirm the offer

        Review the offered 3/8-24 UNF probe configuration, 1.0 m cable, connector protection, condition and included items.

      • 2

        Arrange dispatch

        Confirm the quantity, dispatch date, lead-time start and delivery details for 330101-00-75-10-02-00 in the quotation.

      • Match the complete marking

        Match the complete 330101-00-75-10-02-00 marking, case geometry, cable length and connector arrangement to the installed measurement position.

      • Check the offered item before ordering

        Request available label and connector photos. Have your maintenance team compare the offered 330101-00-75-10-02-00 with the installed equipment and applicable Bently Nevada documentation.

      Technical specifications for 330101-00-75-10-02-00

      • Manufacturer:
        Bently Nevada
      • Product Category:
        Machinery Monitoring Systems
      • Spare Part Number:
        330101-00-75-10-02-00
      • Weight:
        0.1 kg
      • Tariff Code:
        8537101190
      • Measurement principle:
        Non-contact eddy current
      • Mounting thread:
        3/8-24 UNF
      • Total probe length:
        1.0 m
      • Cable impedance:
        75 ohm triaxial
      • Cable insulation:
        FEP, standard cable
      • Probe tip material:
        PPS
      • Probe case material:
        AISI 303 or 304 stainless steel
      • Nominal probe DC resistance:
        7.59 ± 0.50 ohm, center to outer conductor
      • Standard probe temperature:
        -52°C to +177°C
      • Matched-system nominal scale factor:
        7.87 V/mm
      • Matched-system linear range:
        2 mm under specified calibration conditions
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • The extended threaded case of Bently Nevada 330101-00-75-10-02-00 gives the mounting arrangement additional reach while the eddy-current sensing tip remains close to the shaft. The mechanical reach and the calibrated electrical length serve different purposes.
      Mounting interface: 3/8-24 UNF; unarmored probe construction
      Electrical length: 1.0 m total probe cable
      Connection: ClickLoc connector without factory protector
      The selected case has a 3/8-24 UNF mounting thread, 7.5 inches overall length and 0 inches unthreaded section. Its standard 75-ohm triaxial cable uses FEP insulation. The miniature coaxial ClickLoc connection is supplied without a factory-installed connector protector; it is separate from the case mounting interface.

      The 1.0 m total probe length must be included in the complete electrical-length calculation. A compatible extension and Proximitor Sensor must form the selected 3300 XL 8 mm system; connector fit alone does not establish calibration.

      The complete matched system provides a nominal 7.87 V/mm scale factor and a 2 mm linear measurement range. Radial-vibration setup uses approximately 1.27 mm gap, corresponding to -9 VDC under the specified AISI 4140 steel calibration conditions. Target material and geometry, component temperatures and the signal-conditioning configuration remain part of the measurement specification.
      Controller platform reference: 3300 XL 8 mm transducer system. Match electrical length, target material and installation conditions.
      The original technical excerpt covers 3300 XL 8 mm probe construction, electrical behavior and system limits relevant to 330101-00-75-10-02-00. The separate installation guide covers 3/8-24 UNF mounting, the 1.0 m cable arrangement and measured system response.
      Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
      System and supply context: 330101-00-75-10-02-00 is one sensing element in a matched 3300 XL 8 mm transducer system. The probe configuration is 3/8-24 UNF with 1.0 m total length; the Proximitor Sensor, extension cable when needed and mounting accessories are separate items unless listed.

      Application scope: The applications below concern the complete calibrated measurement chain. Target material, physical clearance and monitor configuration determine suitability for each machine position.
      Prepare Bently Nevada 330101-00-75-10-02-00 for its configured installation using these checks.
      Mounting engagement

      Limit 3/8-24 UNF thread engagement to 0.563 inch. Case length does not increase this limit.

      Electrical matching

      The 1.0 m total probe length must be included in the complete electrical-length calculation. A compatible extension and Proximitor Sensor must form the selected 3300 XL 8 mm system; connector fit alone does not establish calibration.

      Connection insulation

      The ClickLoc connector is supplied without a factory-installed connector protector. Prevent contact with surrounding conductive surfaces.

      Temperature boundaries

      Apply the probe temperature limit separately from the lower Proximitor operating-temperature limit.

      Target calibration

      Verify target material and geometry. AISI 4140 steel is the reference calibration target.

      Commissioning response

      Check actual DC gap and response to controlled displacement before restoring protection.

      Alternative Names

      330101-00-75-10-02-00 Bently Nevada 330101-00-75-10-02-00

      Technical notes

      System relationship: The 1.0 m total probe length must be included in the complete electrical-length calculation. A compatible extension and Proximitor Sensor must form the selected 3300 XL 8 mm system; connector fit alone does not establish calibration.

      Connection protection: The standard ClickLoc connection is supplied without a factory-installed connector protector. Keep connector insulation, mechanical support and pressure containment separate.

      Calibration boundary: The complete matched system provides a nominal 7.87 V/mm scale factor and a 2 mm linear measurement range. Radial-vibration setup uses approximately 1.27 mm gap, corresponding to -9 VDC under the specified AISI 4140 steel calibration conditions.

      FAQ View All FAQ

      • Does the 7.5-inch case on 330101-00-75-10-02-00 change its electrical system length?
        No. Case reach is a mechanical selection; the total probe length is 1.0 m. Select the Proximitor and any extension cable by the complete electrical length, not the case length.
      • How far may the mounting thread of 330101-00-75-10-02-00 enter the support?
        Maximum thread engagement for the 3/8-24 case is 0.563 inch. A longer case does not permit deeper engagement; excessive engagement can bind the probe.
      • Which target geometry is suitable for the sensing tip of 330101-00-75-10-02-00?
        Use a flat target at least 15.2 mm in diameter, or a shaft at least 50.8 mm in diameter; 76.2 mm is the recommended minimum shaft diameter. Nearby conductive surfaces also affect the field.
      • Can 330101-00-75-10-02-00 connect directly to a 1 m Proximitor Sensor?
        A standard 1 m system uses a 1.0 m probe without an extension cable. Verify the sensor calibration and the complete XL component combination before connection.
      • What resistance should be checked across the disconnected 330101-00-75-10-02-00 probe?
        The nominal resistance from center to outer conductor is 7.59 ± 0.50 ohm for the 1.0 m probe. This continuity check does not verify the complete system scale factor.
      • Why is 330101-00-75-10-02-00 not a 4–20 mA field transmitter?
        The probe is an eddy-current sensing element that requires a compatible Proximitor Sensor. The conditioner produces a voltage proportional to the target gap; the probe alone does not provide a powered current-loop output.
      • Does 330101-00-75-10-02-00 include armored cable or a factory connector protector?
        No. The 330101 construction is unarmored, and connector option 02 uses standard cable with a miniature coaxial ClickLoc connector without the factory-installed protector.
      • How does a different shaft alloy affect calibration of 330101-00-75-10-02-00?
        The specified system accuracy and interchangeability are based on an AISI 4140 steel target. A different target material requires a calibration assessment rather than automatic use of those accuracy limits.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.