Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330101-00-32-10-01-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include 330101-00-32-10-01-00 and the visible revision or assembly identity in your enquiry. Keep the full reference on the quotation. -
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered 330101-00-32-10-01-00 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330101-00-32-10-01-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330101-00-32-10-01-00
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Probe family:3300 XL 8 mm
-
Case thread:3/8-24 UNF
-
Lead armor:without armor
-
Unthreaded length:0 in
-
Overall case length:3.2 in
-
Probe lead length:1.0 m
-
Connector:ClickLoc connector with protector
-
Approval selection:no agency approval selected
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Bently Nevada 330101-00-32-10-01-00. This 3300 XL 8 mm probe senses the gap to a conductive target as one part of the complete proximity transducer chain.
Nominal 1 m probe DC resistance: 7.59 ± 0.50 Ω
Probe-tip encapsulation: Molded PPS plastic
Default system target calibration: AISI 4140 steel
Probe/cable connection: Locking ClickLoc design
Probe-tip encapsulation: Molded PPS plastic
Default system target calibration: AISI 4140 steel
Probe/cable connection: Locking ClickLoc design
Part prefix 330101 selects a 3/8-24 UNF case without lead armor. The selected unthreaded section is 0 in, within an overall 3.2 in case. The 3300 XL 8 mm probe uses TipLoc tip molding and a CableLoc lead attachment rated at 330 N (75 lbf) pull strength. Gold-plated ClickLoc connectors join the probe, extension cable and Proximitor without special installation tools.
Option 10 provides a 1.0 m lead. Code 01 supplies a clickloc connector with protector; keep this connection clean and match it to the extension cable. The standard matched 1 m or 5 m 3300 XL 8 mm system has a 2 mm (80 mil) linear range and a 7.87 V/mm (200 mV/mil) incremental scale factor within its specified conditions. For radial vibration, the manufacturer's recommended gap is about 1.27 mm (50 mil), corresponding to -9 Vdc; these values do not describe the loose probe by itself.
The final code 00 denotes no agency approval selected. Gap, scale factor and linear range describe the matched 3300 XL 8 mm system, rather than this probe alone. The complete system converts the gap to a conductive target into a voltage usable for shaft position, radial vibration and supported speed or phase-reference channels. Target material and selected system length must agree with the installed Proximitor calibration.
Option 10 provides a 1.0 m lead. Code 01 supplies a clickloc connector with protector; keep this connection clean and match it to the extension cable. The standard matched 1 m or 5 m 3300 XL 8 mm system has a 2 mm (80 mil) linear range and a 7.87 V/mm (200 mV/mil) incremental scale factor within its specified conditions. For radial vibration, the manufacturer's recommended gap is about 1.27 mm (50 mil), corresponding to -9 Vdc; these values do not describe the loose probe by itself.
The final code 00 denotes no agency approval selected. Gap, scale factor and linear range describe the matched 3300 XL 8 mm system, rather than this probe alone. The complete system converts the gap to a conductive target into a voltage usable for shaft position, radial vibration and supported speed or phase-reference channels. Target material and selected system length must agree with the installed Proximitor calibration.
Installed-system reference: 3300 XL 8 mm proximity transducer system. Check the 3/8-24 mount and protected connector before setting the gap.
Technical downloads for Bently Nevada 330101-00-32-10-01-00: selected original manufacturer pages and a model-specific Apter Power installation guide.
-
Bently Nevada 330101-00-32-10-01-00 technical reference
Original manufacturer excerpt - PDF, 4 pages. The 330101 option matrix identifies probe construction and lead selection. System performance requires a matched extension cable and Proximitor sensor. -
Bently Nevada 330101-00-32-10-01-00 installation guide
Prepared by Apter Power - PDF, 5 pages. Installation checks, fitting and lead routing, commissioning and verification.
The technical reference preserves selected original manufacturer pages. The installation guide is prepared by Apter Power for this exact model; apply site procedures and the original equipment documentation during work.
Measurement role: 330101-00-32-10-01-00 is a 3300 XL 8 mm proximity probe installed opposite a suitable machine target. In its matched probe, extension-cable and Proximitor chain, it converts changes in probe-to-target gap into signals used for relative shaft vibration or position measurements.
System compatibility: The 3/8-24 UNF case, 1.0 m integral lead and ClickLoc connector with protector must fit the installed bracket and complete transducer-system length. The approved monitor configuration and target material determine which measurement functions are enabled.
System compatibility: The 3/8-24 UNF case, 1.0 m integral lead and ClickLoc connector with protector must fit the installed bracket and complete transducer-system length. The approved monitor configuration and target material determine which measurement functions are enabled.
-
Radial shaft vibration
At a bearing measurement plane, the probe can observe relative shaft motion against a conductive target. The monitoring channel interprets that dynamic gap signal within the matched transducer-system range. -
Axial shaft position
A suitable thrust-position arrangement can use the same noncontact sensing principle to follow axial movement. Target travel and probe placement must remain within the documented system range. -
Phase or speed reference
A once-per-turn target can provide a reference signal when the installed monitor and target design support that function. The probe order code alone does not create a Keyphasor channel. -
Installed-system integration
The 3/8-24 UNF mounting and 1.0 m lead identify the physical probe execution. Pair it with the correct extension cable and Proximitor rather than mixing 3300 XL 8 mm and NSv system components.
Installation and commissioning checks for Bently Nevada 330101-00-32-10-01-00. Preserve the exact probe execution and matched transducer-chain length during replacement.
Isolate the measurement
Make the machine and monitoring channel safe before moving the probe. Record the previous gap setting and connector route.
Mounting thread
Confirm the 3/8-24 UNF opening and case length against the installed bracket. Do not force a dissimilar thread or alter the target clearance.
Target geometry
Inspect the conductive target area, maximum shaft travel and adjacent metal before setting the gap. Avoid positions where the tip may contact the target.
Lead and connector
Route the 1.0 m lead without sharp bends, heat exposure or strain at the ClickLoc connector with protector. Keep mating surfaces clean and protect the connection from contamination.
Matched system length
Count the integral lead and extension cable as one transducer-system length. Verify the installed Proximitor family and approved monitor scaling before interpreting voltage.
Commissioning response
Set the static gap under the approved procedure, then check DC gap voltage and dynamic response. Compare the result with the site acceptance limits for the complete channel.
Alternative Names
3301010032100100
Bently Nevada 330101-00-32-10-01-00
Technical notes
Probe configuration: 330101 selects a 3/8-24 UNF unarmored case with 3.2 in overall length and 1.0 m lead.
System boundary: Measurement performance depends on the matched probe, extension cable, Proximitor sensor and target material.
Technical reference: Bently Nevada 3300 XL 8 mm Proximity Transducer System, 141194 Rev. AN.
FAQ View All FAQ
-
What sensing family does 330101-00-32-10-01-00 belong to?It is a 3300 XL 8 mm probe. It works with a matched extension cable and Proximitor sensor.
-
Which case thread is selected for 330101-00-32-10-01-00?The 330101 part prefix selects a 3/8-24 UNF case thread.
-
Is the lead of 330101-00-32-10-01-00 armored?No. The 330101 probe prefix denotes a version without lead armor.
-
How long is the unthreaded portion of 330101-00-32-10-01-00?Option 00 selects 0 in unthreaded length.
-
What is the overall probe case length of 330101-00-32-10-01-00?Option 32 selects 3.2 in overall case length.
-
How long is the integral lead on 330101-00-32-10-01-00?Option 10 selects a 1.0 m probe lead.
-
What connection is supplied with 330101-00-32-10-01-00?Option 01 specifies a clickloc connector with protector; protect the connection during routing and installation.
-
Does 330101-00-32-10-01-00 alone establish the system measurement range?No. The matched 3300 XL 8 mm probe, extension cable, Proximitor sensor and target calibration establish system performance.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.