Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 3300/35-12-02-01-00-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 3300/35-12-02-01-00-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:3300/35-12-02-01-00-00
-
Estimated shipping dimensions:5x32x20.5cm
-
Weight:1.15 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Operating Temperature::-51°C to +100°C (-60°F to +212°F)
-
Storage Temperature:-51°C to +100°C (-60°F to +212°F)
-
Relative Humidity:100% condensing, non-submersible when connectors are protected
-
Frequency Response:0 to 6.5 kHz: +0, -3 dB, with up to 305 metres (1000 feet) of field wiring
-
Extension cable capacitance:69.9 pF/m (21.3 pF/ft) typical
-
Probe Tip Material:Polyphenylene sulfide (PPS)
Information
Overview
Manuals
Common Applications
Product precautions
The 3300/35-12-02-01-00-00 is a classic dual-channel, six-level alarm tachometer, belonging to the 3300 series mechanical protection system. It is specifically designed for monitoring rotating machinery and features default alarm and protection interlocks.
- a 3300 XL 8 mm probe or 3300 5 mm probe
- a 3300 XL extension cable
- a 3300 Proximitor Sensor
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 3300/35-12-02-01-00-00 Monitor Module, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Monitor the compressor shaft speed and cut off the power source via relay interlock when abnormal acceleration occurs to prevent rotor damage.
Thermal Power Generation
Before or after the unit starts up, extremely low speeds are monitored by magnetoelectric sensors to ensure the normal operation of the turning gear and prevent rotor thermal bending.
Steel & Metallurgy
By monitoring the rotational frequency of large blowers, the system assists process engineers in adjusting the air supply volume and provides alarms for unit safety limits.
Mining & Cement
Before maintenance or restarting, confirm that the massive mill rollers are completely stationary and ensure the safety of personnel entering the interior to work.
Water Treatment & Environment
Monitor the speed of large pumps used for drainage or water transfer to prevent mechanical damage caused by pump reversal due to backflow.
Monitor the speed of large pumps used for drainage or water transfer to prevent mechanical damage caused by pump reversal due to backflow.
When installing and configuring the 3300/35-12-02-01-00-00 module, it is critical to verify that the field sensors are Magnetic Pickups, as this specific option (-02) is incompatible with proximity probes. Additionally, the number of teeth (Events per Revolution) must be accurately set to ensure the displayed RPM matches the actual shaft speed. Given its 6-alarm capability, relay logic configurations must be cross-checked to prevent nuisance trips or fail-to-act scenarios at critical protection setpoints. Furthermore, while 3300 series modules are hot-swappable, they should only be handled after ensuring the system is in a safe bypass mode; regular verification of raw signal quality via the front-panel Buffered Output is also recommended to rule out potential faults caused by fluctuations in sensor gaps.
FAQ View All FAQ
-
What is the 3300/35-12-02-01-00-00?It is the Dual Channel 6-Alarm Tachometer module in the Bently Nevada 3300 system.
-
How to use 3300/35-12-02-01-00-00 for monitoring?Insert the module into the 3300 frame and connect it to the field speed sensor. The module receives pulse signals, displays the speed in the LED window on the front panel, and connects to the DCS or Emergency Stop System (ESD) via the relay output on the rear panel.
-
What sensor inputs are compatible with 3300/35-12-02-01-00-00?Based on its selection (-02), it is specifically designed to receive passive signals from magnetic pickup sensors.
-
What are the mechanical requirements for installing 3300/35-12-02-01-00-00?It is a standard full-height module and must be installed in a Bently Nevada 3300 series rack.
-
How many alarm setpoints does 3300/35-12-02-01-00-00 have?It features 6-level alarms, allowing you to set limits for various states such as overspeed and underspeed.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.