Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 129716-XXX-040-15 MOD:166797-0133
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 129716-XXX-040-15 MOD:166797-0133
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:129716-XXX-040-15 MOD:166797-0133
-
Estimated shipping dimensions:30×30×8.0cm
-
Weight:1.5 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe family:3300 XL 8 mm
-
Base execution:129716 flexible probe
-
Mounting family:3/8-24 flexible execution
-
Measurement method:Non-contact eddy current
-
Matched system sensitivity:7.87 V/mm (200 mV/mil), complete system
-
Matched linear range:2.0 mm (80 mil), complete system
-
System components:Probe, extension cable and Proximitor sensor
-
Configuration control:XXX and MOD suffix retained as supplied
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 129716-XXX-040-15 MOD:166797-0133 provides non-contact shaft sensing through the flexible 3/8-24 probe execution of the 3300 XL 8 mm system.
- Uses the flexible 129716 probe form for constrained routing at the measurement point.
- Operates within a matched 3300 XL 8 mm eddy-current transducer system.
- Supports shaft-relative vibration and static-position sensing.
- Retains the complete XXX and MOD marking as the configuration identity.
Flexible routing must not change the required electrical length or place stress on the sensing end. The installed nameplate, mating cable and Proximitor sensor establish the complete replacement configuration.
Important Notice: Keep the flexible section within its allowable bend and support arrangement. Confirm proportional response and monitor-channel direction before returning the machine to service.
Bently Nevada 129716-XXX-040-15 MOD:166797-0133 Manuals & Downloads
Bently Nevada 129716-XXX-040-15 MOD:166797-0133 Official Technical Reference Excerpt (PDF)Bently Nevada 129716-XXX-040-15 MOD:166797-0133 Installation & Commissioning Guide (PDF)
The first document covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Constrained probe routing
Allows the flexible probe body to follow the approved machine-access path.
Shaft vibration measurement
Provides a non-contact signal for radial vibration monitoring.
Shaft position monitoring
Supports static gap and position measurements within the matched system range.
Configuration-controlled replacement
Restores an installed flexible-probe execution only when the full suffix and MOD marking match.
Before installing Bently Nevada 129716-XXX-040-15 MOD:166797-0133, confirm the documented system, interfaces and controlled configuration.
1
Compare every character of 129716-XXX-040-15 MOD:166797-0133 with the removed probe and the machine record.
2
Keep the flexible section within its allowable bend and support arrangement.
3
Do not infer the XXX position or MOD execution from another 129716 probe.
4
Match the probe, extension cable and Proximitor sensor as one 3300 XL 8 mm system.
5
Protect the sensing tip and coaxial connection from impact and contamination.
6
Route the flexible section away from abrasion, hot surfaces and moving parts.
7
Set the operating gap only after the probe body is mechanically secured.
8
Confirm proportional response and monitor-channel direction before returning the machine to service.
Technical notes
Keep the flexible section within its allowable bend and support arrangement. Confirm proportional response and monitor-channel direction before returning the machine to service.
FAQ View All FAQ
-
What probe form is represented by the 129716 base in 129716-XXX-040-15 MOD:166797-0133?It is the flexible 3/8-24 execution of the 3300 XL 8 mm proximity-probe family.
-
Why does 129716-XXX-040-15 MOD:166797-0133 keep XXX instead of a decoded option value?It is part of the supplied configuration identity and is not replaced with a value from another probe.
-
What measurement principle does 129716-XXX-040-15 MOD:166797-0133 use?The matched 3300 XL 8 mm system uses non-contact eddy-current sensing.
-
Which components must be paired with 129716-XXX-040-15 MOD:166797-0133?Use the designated extension cable and 3300 XL 8 mm Proximitor sensor for the required total electrical length.
-
How should the flexible section of 129716-XXX-040-15 MOD:166797-0133 be routed?Support it within the approved bend path and keep it clear of abrasion, heat and moving hardware.
-
What complete-system range applies when 129716-XXX-040-15 MOD:166797-0133 is correctly matched?The 3300 XL 8 mm system provides a 2.0 mm (80 mil) linear range under the documented system conditions.
-
Can MOD:166797-0133 on 129716-XXX-040-15 MOD:166797-0133 be replaced by a similar MOD?No. Match the complete modification identifier to the installed configuration.
-
Which commissioning result confirms 129716-XXX-040-15 MOD:166797-0133 is working in the intended direction?A controlled gap change must produce the expected polarity, proportional voltage change and monitor indication.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.