Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 107540-01A
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 107540-01A
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:107540-01A
-
Estimated shipping dimensions:19.8×7.6×1.3cm
-
Weight:0.06 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
System family:3300 monitoring rack
-
Assembly role:Power-supply transformer
-
Electrical path:Rack input power conversion
-
Installation location:3300 power-supply assembly
-
Interface check:Primary and secondary wiring
-
Protection check:Fuse, insulation and protective-earth circuits
-
Replacement rule:Installed power-supply revision match
-
Acceptance method:Rack rail voltage and supply-status test
Information
Overview
Manuals
Common Applications
Product Precautions
The assembly belongs to the rack power-conversion path and must remain matched to the installed supply hardware, wiring and input configuration.
- Forms part of the 3300 rack power-conversion assembly.
- Provides transformer isolation and voltage conversion for the supply path.
- Requires exact matching to the installed supply wiring.
- Supports controlled verification of rack power rails after replacement.
Use 107540-01A only in the specified monitoring chain and verify the complete signal path after controlled replacement.
Important Notice: Capture the installed 107540-01A interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
Bently Nevada 107540-01A Manuals & Downloads
Bently Nevada 107540-01A Technical Reference (PDF)Bently Nevada 107540-01A Installation & Commissioning Guide (PDF)The first PDF covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance test results.
Rack power restoration
Replaces a transformer assembly in a 3300 supply.
Preventive maintenance
Addresses heat or insulation degradation found during inspection.
Legacy system support
Maintains an existing 3300 monitoring rack.
Commissioning
Restores and verifies the rack supply path.
Before installing Bently Nevada 107540-01A, confirm the specified system, interfaces and controlled configuration.
1
Confirm the complete 107540-01A marking and the specified 3300 power supply transformer assembly position.
2
Place the affected machine protection channel in the approved maintenance state.
3
Capture the installed system family, assembly role and electrical path before removal.
4
De-energize the associated monitor, sensor supply or field circuit as the procedure requires.
5
Label every connector, conductor and shield before separation.
6
Inspect mating contacts, mounting hardware and cable condition before installation.
7
Restore the retained configuration and verify signal polarity and proportional response.
8
Function-test the complete alarm, indication and shutdown path before returning the machine to service.
Technical notes
Capture the installed 107540-01A interfaces and configuration before removal, then prove the monitored value, status and alarm path after installation.
FAQ View All FAQ
-
Which system family does Bently Nevada 107540-01A belong to?Bently Nevada 107540-01A belongs to the 3300 monitoring rack family.
-
How does Bently Nevada 107540-01A implement its assembly role?Its assembly role is Power-supply transformer.
-
Which value defines the electrical path of Bently Nevada 107540-01A?The electrical path is Rack input power conversion.
-
Where is the installation location for Bently Nevada 107540-01A?The installation location is 3300 power-supply assembly.
-
What should the interface check cover for Bently Nevada 107540-01A?Inspect Primary and secondary wiring.
-
What should the protection check cover for Bently Nevada 107540-01A?Inspect Fuse, insulation and protective-earth circuits.
-
What replacement rule applies to Bently Nevada 107540-01A?The replacement rule is Installed power-supply revision match.
-
Which test completes the acceptance method for Bently Nevada 107540-01A?Perform Rack rail voltage and supply-status test.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.