With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 22811-00-03-05-02 is noncontacting, gap-to-voltage transducer system offers 80 mils (2 mm) of linear measuring range and is compatible with API 670 requirements. Designed for use with virtually any machine type—including gas and steam turbines, compressors, pumps, centrifuges, electric motors, and generators—the system measures static as well as dynamic distances between the probe tip and the observed target.
PPS Material Tip
Gold-Plated Connectors
Wide Temperature Range
Its most common use is for shaft position and vibration measurements on rotating and reciprocating machinery. The general application remains any requirement for accurate, non-contacting displacement measurement.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 22811-00-03-05-02 7200 Series Proximity Sensor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Petrochemical Processing
Specifically used for radial vibration to indicate bearing condition and axial thrust position. It is designed to withstand unusually harsh, wet, and/or chemical environments.
Steam Power Generation
Applied to monitor shaft position and vibration measurements on steam turbines. The system offers 80 mils (2 mm) of linear measuring range for critical rotating assets.
Natural Gas Compression
Designed for use with virtually any machine type including gas turbines and compressors. It provides accurate, noncontacting displacement measurement for high-speed gas equipment.
Industrial Water Treatment
The PPS (polyphenylene sulfide) probe tip is a high-performance plastic capable of resisting corrosive fluids. It ensures reliability in pumps and centrifuges operating in harsh environments.
Electric Motor Manufacturing
Used for monitoring vibration and shaft average radial position in large electric motors and generators. It provides the high-precision signal conditioning required for linear display on monitors.
Refining and Pipelines
Compatible with API 670 requirements for standardized monitoring of rotating and reciprocating machinery. It maintains performance even when located up to 1,000 feet from standard monitors.
An improved 8 mm version of the 7200 System is now standard which includes Bently Nevada's Cable Locs feature. This new technique of sccuring the coaxial cable to the probe tip provides the strongest junction yet offered by Bently Nevada and increases the durability of the probe during installation and usage.
Two new cable length options are now available on 8 mm probes. They are 5 metres and 9 metres of integral cable. Since the entire lead-length is built into the probe, an extension cable is not used with these length options. Nine probe configurations are available to accommodate English and metric thread requirements.The 5 mm probes are constructed of fiberglass. The 8 mm probes are constructed of polyphenylene sulfide, (PPS), a high performance plastic capable of withstanding unusually harsh, wet and/or chemical environments.
Both transducers are suitablc for usc in a confined space and offer 80 mils (2 mm) of linear range with a scale factor of 200 mV/mil (8 V/mm).
What is the specific configuration of model 22811-00-03-05-02?
This model is a 7200 Series 8mm proximity probe with M10 x 1 metric threads, 0 mm unthreaded length, 30 mm overall case length, and 0.5 metre (1.6 feet) total length.
What is the linear measuring range of the 22811-00-03-05-02 probe?
The system offers a linear range of 80 mils (2.0 mm), which typically begins at approximately 10 mils (0.25 mm) from the probe face when used with an AISI 4140 steel target.
What material is used for the probe tip of the 22811-00-03-05-02?
Probes are constructed of polyphenylene sulfide (PPS), a high-performance plastic capable of withstanding unusually harsh, wet, and/or chemical environments.
What are the environmental temperature limits for the 22811-00-03-05-02?
The probe and integral cable are designed to operate within a temperature range of -30°F to +350°F (-34°C to +177°C) according to official environmental limits.
What is the scale factor and frequency response of this transducer system?
The system has a scale factor of 200 mV/mil (7.87 V/mm) and a frequency response from 0 Hz (DC) to 10 kHz (0 to 600,000 cpm).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
