102044-00-32-10-02

FAQS

• What exact system function does 102044-00-32-10-02 provide?
  102044-00-32-10-02 is bently nevada proximity probe. It provides the non-contact sensing element for the installed Bently Nevada proximity measurement chain.
• Which Bently Nevada components must be matched with 102044-00-32-10-02?
  Use 102044-00-32-10-02 only with the documented Bently Nevada proximity transducer installation arrangement, including Installed matching Proximitor Sensor, Installed cable and connector arrangement, Conductive machine target.
• How should the complete 102044-00-32-10-02 order code be checked before installation?
  Compare every suffix with the nameplate and the controlling 108M1756 Rev. AL ordering table; the documented base part number is 102044.
• What installation detail is critical for 102044-00-32-10-02?
  Protect the probe tip and installed configured interface from impact, burrs, contamination and unintended side-view metal.
• What wiring or connector checks are required for 102044-00-32-10-02?
  Route and support the installed probe lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.
• How should 102044-00-32-10-02 be configured with its monitoring channel?
  Confirm the matched documented Bently Nevada proximity Proximitor Sensor, total system length and target material before setting the static gap.
• What commissioning test should be performed after installing 102044-00-32-10-02?
  Prove gap voltage, polarity, dynamic response and alarm action before returning the protection channel to service.
• Can 102044-00-32-10-02 directly replace another Bently Nevada part number?
  Do not assume direct substitution. Match the complete 102044-00-32-10-02 code, mechanical interface, cable or housing configuration, system length and approved monitoring-channel arrangement.