Which installed system position is intended for X20BC8084?

Install X20BC8084 only in the documented B&R X20 distributed I/O position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does X20BC8084 handle?

Its documented duty is powerlink network frames and x20 i/o process data; the official record lists powerlink role as V1/V2 controlled node; Type 2.

Which companion hardware must be matched to X20BC8084?

Match X20BC8084 with X20 bus base and I/O slices and POWERLINK cable and switch, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring X20BC8084?

Verify physical layer: 100BASE-TX. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing X20BC8084?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 distributed I/O configuration.

Which isolation and handling checks apply to X20BC8084?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20BC8084.

How should an engineer commission X20BC8084?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended remote x20 i/o station function.

Can X20BC8084 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, b&r id and approved system revision.

B&R X20BC8084 Expandable POWERLINK bus controller

Name: X20BC8084
Brand: B&R
SKU: X20BC8084

X20BC8084

Expandable POWERLINK bus controller

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for X20BC8084

Manufacturer:

B&R

Product Category:

PLC Systems

Spare Part Number:

X20BC8084

Estimated shipping dimensions:

10.2x6x2.5cm

Weight:

0.06 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

B&R ID:

0x2674

POWERLINK role:

V1/V2 controlled node; Type 2

Ports:

2 shielded RJ45

Physical layer:

100BASE-TX

Data rate:

100 Mbit/s

Maximum segment:

100 m

Minimum fieldbus/X2X cycle:

200 us

Bus power consumption:

2 W

Information

Overview Manuals Common Applications Product Precautions

B&R X20BC8084 is expandable powerlink bus controller. It couples expandable X20 I/O stations to a POWERLINK network and supports line or redundant connection arrangements.

Operates as a POWERLINK controlled node
Provides two shielded RJ45 ports
Transfers X20 data with 200-microsecond minimum cycles
Supports link selection and redundancy

X20BC8084 operates with X20 bus base and I/O slices, POWERLINK cable and switch, 24 V DC station supply, Automation Studio hardware configuration.

Engineered applications include Remote X20 I/O station, POWERLINK line topology, Redundant distributed-I/O link, Bus-controller replacement.

Important Notice: Record the node number, cable port order and X2X configuration before replacement; verify both link directions and I/O diagnostics after startup.

Apter Power X20BC8084 Manuals and Guides

Apter Power X20BC8084 Product and System Technical Reference PDF Apter Power X20BC8084 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Remote X20 I/O station

Connects remote X20 slices to the controller.

POWERLINK line topology

Extends a deterministic POWERLINK line.

Redundant distributed-I/O link

Supports an engineered redundant communication path.

Bus-controller replacement

Restores the node while preserving network identity.

Read the applicable B&R instructions before work. Verify X20BC8084 and the installed B&R X20 distributed I/O configuration.

Verify the full X20BC8084 marking and its assigned B&R X20 distributed I/O position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and powerlink network frames and x20 i/o process data field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed X20 bus base and I/O slices and POWERLINK cable and switch against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended remote x20 i/o station function and retain the final test result.

FAQS

Which installed system position is intended for X20BC8084?

Install X20BC8084 only in the documented B&R X20 distributed I/O position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does X20BC8084 handle?

Its documented duty is powerlink network frames and x20 i/o process data; the official record lists powerlink role as V1/V2 controlled node; Type 2.
Which companion hardware must be matched to X20BC8084?

Match X20BC8084 with X20 bus base and I/O slices and POWERLINK cable and switch, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring X20BC8084?

Verify physical layer: 100BASE-TX. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing X20BC8084?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 distributed I/O configuration.
Which isolation and handling checks apply to X20BC8084?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20BC8084.
How should an engineer commission X20BC8084?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended remote x20 i/o station function.
Can X20BC8084 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, b&r id and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

X20BC8084

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for X20BC8084

Technical specifications for X20BC8084

Information