With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 5069-L380ERM CompactLogix 5380 controller provides centralized machine control utilizing 8MB of memory, two integrated Ethernet connections, and a diagnostic USB interface. Built to orchestrate high-density local matrices and multi-axis kinematics, it directly addresses up to 31 local expansion modules while simultaneously managing up to 256 motion axes and 28 synchronized CIP Drive loops over the network.
Use of 1784-SD1 or 1784-SD2 Secure Digital (SD) card for nonvolatile memory
Two EtherNet/IP ports with the option to use Dual-IP mode or Linear/DLR mode
Support for Integrated Motion over an EtherNet/IP network (not all CompactLogix 5380 controllers)
It supports the use of 1784-SD1 (1GB) or 1784-SD2 (2GB) Secure Digital (SD) cards for nonvolatile memory. The two Gigabit EtherNet/IP ports offer the option to use Dual-IP mode or Linear/DLR mode. As a High-Performance Programmable Automation Controller (PAC) within the CompactLogix 5380 product line, this unit incorporates embedded motion capabilities over EtherNet/IP networks, coordinating a maximum of 256 total motion axes, which includes up to 28 integrated motion (CIP Drive) axes across virtual, consumed, and regenerative configurations. Memory allocation includes 8MB of primary user storage, which can be backed up and scaled via 1784-SD cards up to 32GB.
Communication is distributed across dual gigabit Ethernet ports and a single programming USB port. The Ethernet interfaces deliver full-duplex transmission rates of 10/100/1000 Mbps to route data across DLR, star, or linear networks for up to 150 field nodes. The USB port operates at 12 Mbps exclusively as a localized maintenance tool. For robust operation in electrically noisy environments, the controller applies 300V continuous basic and double insulation layers across its backplane, Ethernet, USB, MOD, and SA power buses.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Allen Bradley 5069-L380ERM CompactLogix 5380 controller Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Packaging Machinery Industry
High-speed, multi-axis synchronous packaging lines. It precisely controls multiple servo motors via integrated CIP Motion for bag forming, filling, sealing, and flying shear cutting.
Automotive Manufacturing Industry
Body assembly lines and robot coordination. It manages variable frequency drives (VFDs) for conveyors and interlocks with welding or painting robots over Gigabit Ethernet for precise positioning.
Pharmaceuticals
Tablet pressing and blister packaging lines. It precisely controls the compression tooling motion and triggers high-speed I/O for temperature monitoring and vision inspection cameras to ensure compliance.
Lithium Battery Manufacturing Industry
Electrode coating and high-speed winding machines. It utilizes tension control algorithms via EtherNet/IP nodes to regulate unwinding/rewinding torque, preventing foil tearing or wrinkling.
Semiconductor & Electronics Industry
Die bonders and Surface Mount Technology (SMT) pick-and-place machines. It delivers microsecond-level motion responses to drive linear motors for high-precision X-Y-Z component placement.
Printing & Paper Converting Industry
High-speed multi-color rotary presses and paper cutters. It provides precise registration mark tracking and phase alignment (electronic camming) between printing cylinders to avoid color offset at high speeds.
When using the Allen-Bradley 5069-L380ERM controller, you must strictly segregate its dual power inputs by supplying independent lines for Module power and Field-side power to prevent electrical noise coupling or module damage.
To maintain high-speed, deterministic synchronization across its 32 motion axes, use certified Category 5e or Category 6 shielded cables and ground the system correctly within a standard Device Level Ring network topology. Ensure that total project data allocations remain within the 8 MB user memory limit, and limit the active connection footprint to 80 EtherNet/IP communication nodes to avoid buffer overflows.
Finally, respect the 0°C to 60°C operating temperature boundary, use terminal blocks under specified torque ratings, and verify that the non-volatile SD card (1784-SD2) is locked in place to guarantee safe data backups during power-down cycles.
The 5069-L380ERM CompactLogix 5380 controller provides high-speed enterprise automation utilizing 8MB of application memory, dual gigabit Ethernet ports, and an integrated USB utility interface. Engineered for multi-axis motion and dense machine architectures, it coordinates up to 28 motion axes and 70 network nodes while managing a local footprint of 31 I/O modules directly over the passive backplane.
Which network modes do the dual Ethernet ports of the 5069-L380ERM support?
These two ports can be configured as a dual-network (Dual-IP) mode with independent IP addresses, or as a single IP architecture supporting linear and Device Level Ring (DLR) topologies.
Does the 5069-L380ERM provided with a removable non-volatile storage?
Yes. It is equipped with 2GB 1784-SD2 memory card that ships with the controller.
How many Ethernet nodes can the 5069-L380ERM manage and connect at maximum?
A single controller can simultaneously support and stably coordinate up to 70 independent EtherNet/IP nodes within its control network.
How many motion axes can the 5069-L380ERM coordinate at maximum?
It can manage up to 28 motion axes within software tasks, including a maximum of 8 fully synchronized, closed-loop servo motion axes over EtherNet/IP.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications