ABB INIIT12 is an evidence-bounded remote transfer module in the Bailey INFI 90 / Harmony Rack installed-base context. ABB describes INIIT12 as a remote transfer module that communicates serially with another INIIT12 and directly with its INNIS01 module.
- Product type: Remote transfer module
- Network companion: INNIS01
- Termination unit: NTMP01
- Serial ports: Two RS-232-C ports on NTMP01
System role: It provides bidirectional Cnet/INFI-NET remote transfer through two RS-232-C ports located on NTMP01. The page publishes only functions and ratings stated by the cited ABB material; sibling and successor data are not transferred. Architecture boundary: The module occupies one MMU slot, interfaces to Controlway and connects by cable to NTMP01. Exact cable, termination, firmware, revision and host dependencies must be checked against the physical assembly and approved project drawings. For maintenance, migration or replacement work, verify identity, companion hardware, wiring, addressing, power, network settings and commissioning tests before returning the loop or node to service. Current formal lifecycle phase, origin, HS code, dimensions and logistics weight remain HOLD without exact ABB evidence.
Important Notice: Verify the complete ABB INIIT12 nameplate, revision and installed-system documentation before use.
Apter Power INIIT12 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for ABB INIIT12.
System documentationProvides a source-traceable boundary for rack, network, I/O and termination records.
Commissioning reviewGuides pre-power checks, companion-module verification and controlled functional testing.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete ABB INIIT12 nameplate, revision and installed-system documentation before use.
2Keep INIIT12 distinct from INIIT13, SPIIT12 and local-transfer models; verify installed INNIS and termination revision.
3De-energize and follow the site's approved electrical and process-safety procedure before disturbing hardware or field wiring.
4Back up controller, network, I/O, addressing and configuration data before replacement or firmware work.
5Verify every companion module, termination unit, cable, connector and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented loop, network or functional test and confirm alarms and fail states after work.
8Current formal lifecycle phase, origin, HS code, dimensions and logistics weight remain HOLD without exact ABB evidence.
Videos
News
Applications
