The T9110 is an ICS Triplex AADvance Processor Module for the AADvance system.
- AADvance Processor Module
- Executes the safety application and coordinates I/O
- Application, diagnostic and configured communications data
- AADvance controller base and approved system architecture
It executes the safety application, coordinates I/O, diagnostics and controller communications. It handles application variables, I/O data, diagnostic records and configured Ethernet/serial traffic and operates with T9100 processor base unit, AADvance Workbench or AADvance-Trusted SIS Workstation, T9300 I/O base units. Verify the exact hardware revision, matched termination and controlled application records before commissioning.
Important Notice: Use the complete T9110 code and verify the physical nameplate, current ICS Triplex / Rockwell Automation documentation, field wiring, project, and compatible system hardware before installation or replacement.
Apter Power T3481 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the official ICS Triplex source named in each document. Confirm the physical nameplate, current Rockwell Automation documentation, and applicable installation instructions before installation or replacement.
Shutdown solenoids
Uses the T3481 regent monitored guarded 24 vdc output module in a model-appropriate Regent control or protection function.
Trip relays
Handles system status and diagnostics under the official engineering limits.
Alarm annunciators
Uses the T3481 regent monitored guarded 24 vdc output module in a model-appropriate Regent control or protection function.
Burner management outputs
Handles system status and diagnostics under the official engineering limits.
Read Rockwell Automation ICSTT-RM021-EN-P (PD-6033) and the applicable system installation instructions before use. Verify the physical nameplate, revision, slot and matched termination hardware.
1
Verify the exact model, hardware revision, firmware and nameplate before substitution.
2
Install only with Regent I/O chassis, matching terminal blocks, field supply and WINTERPRET configuration; do not mix unmatched termination or base hardware.
3
De-energize or follow the approved live-insertion procedure and site safety plan before removal.
4
Preserve module keying, slot assignment, wiring polarity, shields, grounding and field power limits.
5
Complete application download, diagnostics, proof testing and functional acceptance before return to service.
Videos
News
Applications
