-
Match the complete marking
Include AFPS-11C and every revision or approval marking visible on the item. Keep the exact reference on your enquiry and quotation. -
Check the offered item before ordering
Request available label and interface photos. Have your maintenance team compare the offered AFPS-11C reference with the installed equipment and applicable ABB documentation.
Technical specifications for AFPS-11C
-
Manufacturer:ABB
-
Product Category:Servo Drives
-
Spare Part Number:AFPS-11C
-
Weight:1.1 kg
-
Tariff Code:8537101190
-
Drawing position:A433
-
Documented power class:1 kW
-
Converter module reference:400 kVA class documentation
-
Cooling load reference:Y41 fan circuit
-
Power-semiconductor references:V21 to V23
Information
- The complete AFPS-11C identity establishes the hardware selection; installation still depends on the documented host, companion components and project configuration.
1 kW design role: Match the documented fan inverter and converter frame arrangement.
Connector control: Photograph every plug and conductor before disturbing the internal assembly.
The board operates with the AFIN-01C fan inverter and the installed fan circuit. Diagnose supply, fan-inverter and motor paths separately before replacing any one board.
Commissioning should verify protected power, fan start and hold sequence, airflow direction and stable converter cooling without active fan or supply diagnostics.
-
ABB AFPS-11C technical reference
Apter Power reference with verified manufacturer data and exact-model applicability. -
ABB AFPS-11C engineering guide
Apter Power installation, configuration, diagnostic and acceptance guidance.
Platform applications: The uses below depend on the installed controller configuration and approved system design.
-
Converter cooling supply
Provide power to the documented 1 kW fan-inverter circuit. -
Wind-turbine converter maintenance
Maintain the ACS800-67 internal cooling chain. -
Fan-system fault isolation
Separate supply-board, inverter-board and fan-motor causes. -
Exact-board replacement
Restore the A433 assembly and its documented connectors.
Match every field of AFPS-11C with the approved spare-parts record before installation.
Use grounded handling, antistatic packaging and protected work surfaces for exposed electronics.
Confirm connector keying, slot assignment, supply and companion hardware before energizing.
Record switches, firmware, parameters, terminal assignments and as-found diagnostics before removal.
Check contamination, corrosion, ventilation, vibration and cabinet temperature before fitting the replacement.
Complete the manufacturer and site acceptance procedure, then retain the as-left result with the maintenance record.
Alternative Names
Technical notes
Converter relationship: Restore AFPS-11C at position A433 and verify its connection to AFIN-01C, fan Y41 and the documented V21 to V23 semiconductor path.
Power boundary: The 1 kW designation belongs to the documented fan-inverter circuit; do not treat it as the rating of the complete converter.
Technical reference: ABB ACS800-67 Wind Turbine Converters Hardware Manual.
FAQ View All FAQ
-
How should AFPS-11C be distinguished from the converter control-power board?Confirm the A433 location, fan-inverter supply role and connector destinations; do not identify it only by board size or nearby power components.
-
What should be tested if AFPS-11C does not start the cooling fan?Check incoming protected power, board output, AFIN-01C command path, fan motor circuit and interlocks in the converter diagram.
-
How should AFPS-11C connectors be handled during replacement?Photograph each plug, mark orientation, inspect locking and discoloration, and reconnect only after comparing the converter circuit diagram.
-
What proves AFPS-11C is functioning after installation?Verify fan start and hold behavior, stable output under load, correct airflow and absence of cooling-system diagnostics.
-
What evidence should be recorded before replacing AFPS-11C?Capture the complete nameplate, installed slot or mounting position, companion hardware, wiring identifiers and the accepted operating baseline for the 1 kw fan-inverter power-supply board.
-
How should an intermittent fault around AFPS-11C be isolated?Separate field wiring, connector, supply, grounding, configuration and host-system causes. Reproduce the symptom under a controlled test and change only one variable at a time.
-
What configuration evidence should be retained after commissioning AFPS-11C?Retain the hardware identity, firmware or parameter record where applicable, channel assignment, as-left measurements, alarm or diagnostic state and the approved functional-test result.
-
When should AFPS-11C be rejected during incoming inspection?Quarantine the item if the complete marking, connector keying, board revision, protective coating, terminal condition or required companion hardware differs from the approved replacement record.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.







