Is 1SDA083360R1 the Ekip UP Protect+ version?

No. Article 1SDA083360R1 identifies Ekip UP Protect.

Which electrical quantities support protection on 1SDA083360R1?

The Protect version uses current, voltage, frequency and power protection functions.

Can the 6300 A application limit of 1SDA083360R1 be connected directly to its terminals?

No. The application range depends on the selected current sensors and rating plug; it is not a direct terminal current rating.

Why are sensor-system precision values different for 1SDA083360R1?

Sensor and installation errors add to unit measurement error. Under Type C reference conditions, system current precision is 1% rather than the unit-only 0.5%.

What voltage-transformer condition accompanies the precision figures for 1SDA083360R1?

Where a VT is used for the stated reference values, its accuracy class must be 0.2 or better and the installation conditions must be satisfied.

How far does harmonic analysis extend on 1SDA083360R1?

The network-analysis function covers harmonics up to the 50th order.

Which sampling choices are available for the data logger in 1SDA083360R1?

The sampling choices are 1200, 2400, 4800 and 9600 Hz, with a maximum recording duration of 16 seconds.

Why must the trip path be tested separately on 1SDA083360R1?

Correct measurements do not prove that the switching device opens. Test the trip interface, continuity diagnostics and actual protection action.

1SDA083360R1

Name: 1SDA083360R1
Brand: ABB
SKU: 1SDA083360R1

Digital Protection Unit

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

ABB 1SDA083360R1 is the Ekip UP Protect digital unit for metering and current, voltage, frequency and power protection in compatible low-voltage installations.

Manufacturer part number
1SDA083360R1
Shipping
Swift global dispatch
Condition
New, original product
Shipping size (est.)
29.5cm x 9.3cm x 11cm
Country of Origin
Sweden

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for 1SDA083360R1

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

0

Review your reference

Send the complete ABB 1SDA083360R1 reference, label photographs and required quantity. Check the Protect version, sensor types, rating plug and trip circuit.
1

Confirm the offer

Review the offered revision, condition, included items and documents against the confirmed installation.
2

Arrange dispatch

Confirm quantity, dispatch date, lead-time start and delivery details in the quotation.

Match the complete marking

Include the complete ABB 1SDA083360R1 marking and any hardware revision on the item. Check the Protect version, sensor types, rating plug and trip circuit.
Check the offered item before ordering

Request available label and connector photos. Have your maintenance team compare the offered 1SDA083360R1 with the installed equipment and applicable ABB documents.

Technical specifications for 1SDA083360R1

Manufacturer:

ABB
Product Category:

General Automation
Spare Part Number:

1SDA083360R1
Weight:

1.15 kg
Tariff Code:

8537101190
Protection version:

Ekip UP Protect
System voltage:

Up to 1150 V
Current application range:

100–6300 A with the selected sensors and rating plug
System frequency:

50–60 Hz
Operating temperature:

-25 to +70°C; maximum +60°C for UL
Protection degree:

IP40; IP54 with suitable external cover
System current precision:

1% under Type C sensor reference conditions
System voltage precision:

0.7% under stated reference conditions
System power precision:

2% under stated reference conditions
Harmonic analysis:

Up to 50th harmonic
Data-logger sampling:

1200, 2400, 4800 or 9600 Hz
Maximum recording duration:

16 seconds

View as PDF Ask for Quote

Information

Overview Downloads Applications / Compatibility Product Precautions

ABB 1SDA083360R1 adds electronic protection and measurement to an existing switching arrangement while retaining the separately engineered trip and sensing circuits.

Version: Ekip UP Protect
Measured quantities: Current, voltage, frequency and power
Integration: Separate sensing and switching circuits

The Protect version adds protection based on current, voltage, frequency and power to the Ekip UP measurement functions. Advanced generator, directional and adaptive functions belonging to Protect+ must not be assumed for this article.

The installation uses the selected current sensors, rating plug and voltage inputs to establish its measurement range. Metering precision with sensors differs from unit-only precision, so the complete sensing chain and transformer accuracy must be considered.

A trip path connects the protection decision to the switching device. Commissioning must verify actual opening behavior and diagnostics, including sensor, rating-plug and trip-coil continuity, rather than ending with a correct display reading.

Controller platform reference: ABB Ekip UP Protect. Match the sensing chain, protection settings and trip circuit.

The original technical excerpt applicable to ABB 1SDA083360R1 covers Protect-version scope, system ratings, metering and ordering identity. The separate installation guide covers sensor selection, protection settings, trip interface and functional injection tests.

Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.

System and supply context: The unit acts as a protective relay in a separately engineered low-voltage switching system.

Application scope: Use only functions enabled for the Protect version and the actual fitted accessories and software.

Feeder protection
Apply current, voltage, frequency and power protection to the designed feeder.
Switchgear modernization
Add electronic functions to an existing switching arrangement.
Power-quality review
Inspect harmonic and voltage-event measurements under the configured limits.
Fault investigation
Use event and waveform records to evaluate protection operation.

Prepare ABB 1SDA083360R1 for its configured installation using these checks.

Version boundary

Do not assign Protect+ or Control+ functions to this article.

Sensor selection

Match current sensors and the rating plug to the circuit.

Voltage inputs

Apply the correct voltage-transformer ratio and accuracy.

Trip coordination

Prove the actual switching-device opening path.

Settings control

Retain approved protection thresholds and delays.

System test

Test metering, diagnostics and trip behavior together.

Alternative Names

ABB 1SDA083360R1

Technical notes

Signal and interface: The 100–6300 A range is a system application range requiring the selected sensors and rating plug; it is not a direct-current rating for the unit terminals.

Installation boundary: Type C reference conditions govern the stated system precision. Voltage transformers, when used for those values, require class 0.2 or better.

Technical basis: ABB Ekip UP Technical Catalogue, 1SDC001051D0201, May 2020. Article 1SDA083360R1 is Ekip UP Protect, not Protect+ or Control+. Sensor-dependent metering values require the stated Type C installation conditions.

FAQ View All FAQ

Is 1SDA083360R1 the Ekip UP Protect+ version?

No. Article 1SDA083360R1 identifies Ekip UP Protect.
Which electrical quantities support protection on 1SDA083360R1?

The Protect version uses current, voltage, frequency and power protection functions.
Can the 6300 A application limit of 1SDA083360R1 be connected directly to its terminals?

No. The application range depends on the selected current sensors and rating plug; it is not a direct terminal current rating.
Why are sensor-system precision values different for 1SDA083360R1?

Sensor and installation errors add to unit measurement error. Under Type C reference conditions, system current precision is 1% rather than the unit-only 0.5%.

What voltage-transformer condition accompanies the precision figures for 1SDA083360R1?

Where a VT is used for the stated reference values, its accuracy class must be 0.2 or better and the installation conditions must be satisfied.
How far does harmonic analysis extend on 1SDA083360R1?

The network-analysis function covers harmonics up to the 50th order.
Which sampling choices are available for the data logger in 1SDA083360R1?

The sampling choices are 1200, 2400, 4800 and 9600 Hz, with a maximum recording duration of 16 seconds.
Why must the trip path be tested separately on 1SDA083360R1?

Correct measurements do not prove that the switching device opens. Test the trip interface, continuity diagnostics and actual protection action.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.