Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES5734-1BD20
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6ES5734-1BD20
-
Manufacturer:Siemens
-
Product Category:HMI Panels
-
Spare Part Number:6ES5734-1BD20
-
Estimated shipping dimensions:15x2.5x15cm
-
Weight:0.16 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Cable length:3.2 m
-
PC-side interface:Serial, 25-pin RS232
-
Conversion:Integrated RS232/TTY converter
-
Target class:Supported SIMATIC operator panels
-
Use boundary:Panel variant must be checked in the Siemens cable matrix
Information
Overview
Manuals
Common Applications
Product Precautions
When an engineering PC is connected to a legacy operator panel, Siemens 6ES5734-1BD20 provides the documented physical conversion path and must be matched to the panel variant before transfer work.
- 3.2 m cable length
- Integrated RS232/TTY converter
- 25-pin PC RS232 side
- Legacy operator-panel service
The controlled engineering path is Engineering PC serial port → 25-pin RS232 connection → Integrated RS232/TTY conversion → Supported operator panel; preserve the approved system record and verify the intended final response before release.
Important Notice: Confirm the target operator-panel variant and required serial settings before connecting the converter cable.
Siemens 6ES5734-1BD20 Manuals & Downloads
Siemens 6ES5734-1BD20 Official Technical Reference (PDF)Siemens 6ES5734-1BD20 Installation & Commissioning Guide (PDF)
Important Notice: The official Siemens cable matrix lists the exact 6ES5734-1BD20 converter cable and supported service path; the ApterPower guide provides a separate exact-model field sequence for preparation, connection checks, functional proving and acceptance.
Operator-panel configuration
Serial project transfer to a supported legacy panel.
Service connection
Temporary engineering link during controlled maintenance.
Interface conversion
Translate PC RS232 signaling to the required TTY connection.
Legacy spare control
Keep the exact converter cable with the documented panel service kit.
Apply these exact-model controls to Siemens 6ES5734-1BD20 before isolation, replacement, reconnection, energization and final release.
1
Confirm the target panel and variant in the Siemens cable matrix.
2
Use the complete 6ES5734-1BD20 order number when selecting the cable.
3
Inspect connector pins, shells and strain relief before connection.
4
Do not substitute a passive serial cable for the integrated converter assembly.
5
De-energize or place the panel in the documented service state before connecting.
6
Secure the 3.2 m cable to prevent pull load on either connector.
7
Use the panel-specific transfer settings and communication procedure.
8
After transfer, confirm the panel project and remove the service cable safely.
Technical notes
Use the cable only with a panel variant listed for the integrated RS232/TTY conversion path. Inspect both connectors and verify the panel-specific transfer settings before communication work.
FAQ View All FAQ
-
Which RS232-to-TTY service path is provided by Siemens 6ES5734-1BD20?It is a 3.2 m serial PC cable with an integrated RS232/TTY converter.
-
Which PC-side connector is documented for Siemens 6ES5734-1BD20?The Siemens matrix lists a serial 25-pin RS232 PC connection.
-
Why cannot a passive serial cable replace Siemens 6ES5734-1BD20?The order number includes the active RS232/TTY conversion function, which a passive serial cable does not provide.
-
Which operator-panel variant check is required before connecting Siemens 6ES5734-1BD20?Confirm the exact panel model and variant in the applicable Siemens target-hardware matrix.
-
Under what condition may Siemens 6ES5734-1BD20 be used with a SIMATIC panel?Use it only when the exact panel family and variant are listed for this cable in the Siemens target-hardware matrix.
-
Which connector and strain-relief inspections are needed before using Siemens 6ES5734-1BD20?Check connector pins, shell retention, cable jacket and strain relief.
-
Which verification closes a project transfer performed through Siemens 6ES5734-1BD20?Verify the loaded project on the target panel and document the cable and communication settings used.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.