Speak to a sourcing specialist
sales13@apterpower.com

6ES5460-4UA11

Isolated Analog Input Module
Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe:

Siemens 6ES5460-4UA11 converts eight analog inputs using integrating dual-slope conversion and plug-in range submodules. The input path supports voltage, current or Pt100 measurement according to the installed submodules and switch settings.
  • Manufacturer part number
    6ES5460-4UA11
  • Shipping
    Swift global dispatch
  • Condition
    New, original product
  • Shipping size (est.)
    2cm x 19.5cm x 25.5cm
  • Country of Origin
    USA
Get a quick price for 6ES5460-4UA11
E-mail *
Mobile
Company
Content *
Quantity *
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

  • 0

    Review your reference

    Send the complete 6ES5460-4UA11 reference, label photographs and required quantity. Check both range submodules, both mode-switch blocks and the sensor-front-connector arrangement.

  • 1

    Confirm the offer

    Review the offered 6ES5460-4UA11 execution, condition and included items. Confirm input module, range submodules and front connector as individually itemized in the quotation.

  • 2

    Arrange dispatch

    Swift global dispatch. Confirm quantity, dispatch date and delivery details for 6ES5460-4UA11 in the quotation.

  • Match the complete marking

    Match the complete Siemens 6ES5460-4UA11 marking and actual installed configuration. Check both range submodules, both mode-switch blocks and the sensor-front-connector arrangement.

  • Check the offered item before ordering

    Compare offered-unit photographs, interfaces and included items with the installed 6ES5460-4UA11 and its applicable installation requirements.

Technical specifications for 6ES5460-4UA11

  • Manufacturer:
    Siemens
  • Product Category:
    PLC Systems
  • Spare Part Number:
    6ES5460-4UA11
  • Weight:
    0.54 kg
  • Tariff Code:
    8537101190
  • Analog inputs:
    8
  • Range-module grouping:
    4 channels per submodule
  • Digital representation:
    13-bit two’s complement or 12 bits plus sign
  • Conversion method:
    Integrating dual slope
  • Integration at 50 / 60 Hz:
    20 ms / 16⅔ ms
  • Coding time at 50 / 60 Hz:
    60 ms / 50 ms per value
  • Eight-channel cycle at 50 Hz:
    Approximately 0.48 s
  • Permissible common-mode potential:
    60 V AC / 75 V DC maximum
  • Low-level range:
    ±50 mV

Information

Overview Downloads Applications / Compatibility Product Precautions
  • Siemens 6ES5460-4UA11 provides a configurable interface between field transducers and the S5 program, with independent attention required for range selection, digital representation and sensor reference potentials.
Range organization: Two four-channel plug-in range submodules
Signal processing: Selectable mains-frequency integration
Data interpretation: Preserve sign format and sensor scaling
Each range submodule serves four inputs. The module-wide mode and the installed divider, shunt or continuity submodule together determine the usable signal range; changing only the software scale does not change the hardware input circuit.

Input channels are isolated from the reference potential and from one another, except in the Pt100 arrangement. Two-wire transducer connections also require attention to their common reference and can remove the isolation otherwise available between channels.

The integration setting must suit the mains frequency, and the program must decode the chosen signed-number representation. Validate the complete sensor-to-program path using an appropriate signal source, including the configured overflow and open-circuit response.
Controller platform reference: SIMATIC S5 analog I/O. Follow the applicable installation instructions and approved design.
Technical and service documents for Siemens 6ES5460-4UA11, covering the applicable hardware arrangement and engineering verification.
Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
System and supply context: Siemens 6ES5460-4UA11 serves the SIMATIC S5 analog I/O arrangement. Evaluate the full connected signal or control path when selecting companion hardware.

Application scope: The applications below describe the installed measurement or control path. Select compatible companion equipment; accessories are included only when expressly itemized.
Prepare Siemens 6ES5460-4UA11 for its configured installation using these checks.
Capture range and mode settings

Record the two range-submodule identities, both mode-switch blocks, address and sensor wiring. Identify current-loop, voltage and resistance circuits separately, including any compensation arrangement.

Check sensor references

Trace the sensor return and excitation paths. Review the Pt100 or two-wire-transmitter common-reference arrangement and confirm that the actual potential differences remain within the module limits.

Reinstate the measurement hardware

Isolate the field circuit as required, then restore the module, submodules and front connector according to the installation procedure. Select the recorded integration frequency and digital representation; retain the original range mode.

Verify the analog conversion

Apply traceable reference signals at zero and suitable nonzero points. Allow the integrating conversion and channel scan to settle; compare each input word with the configured sign and scale.

Prove fault handling and hand over

Test the supported overflow and open-circuit response with the process secured. Remove temporary signal sources, restore each sensor and record the final range, switch settings and observed diagnostics.

Configuration handover

Retain the final 6ES5460-4UA11 identity, tested settings and accepted channel or system response for subsequent maintenance.

Alternative Names

Siemens 6ES5460-4UA11

Technical notes

Range hardware: Two four-channel submodules define the electrical input circuits. Verify their part numbers and mode compatibility before connecting a current loop or voltage source.

Sensor-reference boundary: The Pt100 wiring arrangement does not retain isolation between individual inputs. Assess common references and the permitted common-mode voltage for the actual sensor circuit.

Sampling and diagnostics: The integrating converter rejects interference in relation to the selected mains frequency. Account for the full channel scan when evaluating a fast-changing process signal.

FAQ View All FAQ

  • Why can 6ES5460-4UA11 show a plausible value with the wrong range submodule installed?
    A wrong divider or shunt can still produce a stable digital result. Check the physical submodule and inject known signal points before accepting the program scaling.
  • How does the mains-frequency setting affect measurements with 6ES5460-4UA11?
    It determines the integration interval used to reject periodic interference. Select the actual supply-network frequency and investigate noise before modifying software filtering.
  • Does Pt100 wiring preserve channel-to-channel isolation on 6ES5460-4UA11?
    No. The Pt100 arrangement is an exception to the channel-isolation statement, so sensor references must be assessed as a connected measurement circuit.
  • Why must the S5 program data format match the switch setting on 6ES5460-4UA11?
    Two’s complement and absolute value plus sign encode negative values differently. A mismatch can give incorrect sign or magnitude even when the analog signal is correct.
  • How should unused voltage inputs on 6ES5460-4UA11 be terminated?
    Use the termination arrangement specified for the installed divider, shunt or continuity submodule and open-circuit mode. Do not apply one jumper scheme to every range type.
  • Can a 2-wire transmitter be connected to 6ES5460-4UA11 without reviewing the reference wiring?
    No. Its supply and return arrangement changes the reference relationships and may remove isolation between channels and the load supply.
  • Why does a fast signal step reach different channels of 6ES5460-4UA11 at different times?
    The channels are converted sequentially. Evaluate the complete acquisition cycle instead of treating all input words as simultaneous samples.
  • What should be tested after moving a sensor from one group of 6ES5460-4UA11 to another?
    Check the destination range submodule, open-circuit selection, compensation and software scaling, then verify several known input points.
Manufacturers

Product Browsing History

Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
  • Whatsapp: +86 18030235313

    Send us a message.
  • sales13@apterpower.com

    Complete our online form.
  • +86 18030235313

    Speak to our team in your native language.