What does 6ES7512-1SK01-0AB0 identify?

6ES7512-1SK01-0AB0 identifies the SIMATIC CPU 1512SP F-1 PN for fail-safe execution and PROFINET communication.

Which installed system must 6ES7512-1SK01-0AB0 match?

Match 6ES7512-1SK01-0AB0 to the recorded SIMATIC ET 200SP station, BusAdapter and companion hardware.

Which markings must be checked on 6ES7512-1SK01-0AB0?

Verify the complete 6ES7512-1SK01-0AB0 article number, functional status and firmware record.

What should be recorded before removing 6ES7512-1SK01-0AB0?

Record the station position, memory card, BusAdapter, wiring, project version, safety signature and diagnostics.

Can 6ES7512-1SK01-0AB0 be replaced by appearance alone?

No. 6ES7512-1SK01-0AB0 requires an exact article-number, hardware and project-configuration match.

How should 6ES7512-1SK01-0AB0 be isolated?

Use the approved safety and maintenance procedure, isolate power and prove the affected circuits safe.

What is checked after installing 6ES7512-1SK01-0AB0?

Check seating, supply, BusAdapter, memory card, project load, PROFINET devices, diagnostics and safety functions.

What releases 6ES7512-1SK01-0AB0 to service?

A recorded acceptance test must confirm fail-safe CPU execution and PROFINET communication without unexpected faults.

6ES7512-1SK01-0AB0

Name: 6ES7512-1SK01-0AB0
Brand: Siemens
SKU: 6ES7512-1SK01-0AB0

SIMATIC CPU 1512SP F-1 PN

Siemens 6ES7512-1SK01-0AB0 CPU 1512SP F-1 PN, angled front view with RJ45 port

Siemens 6ES7512-1SK01-0AB0 CPU 1512SP F-1 PN, side nameplate and rear mounting clips

Siemens 6ES7512-1SK01-0AB0 CPU 1512SP F-1 PN, close-up of nameplate

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

Siemens 6ES7512-1SK01-0AB0 is a fail-safe CPU 1512SP F-1 PN for an ET 200SP station. It provides 300 KB program memory, 1 MB data memory and a PROFINET IRT interface with a three-port switch.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for 6ES7512-1SK01-0AB0

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for 6ES7512-1SK01-0AB0

Manufacturer:

Siemens
Product Category:

PLC Systems
Spare Part Number:

6ES7512-1SK01-0AB0
Estimated shipping dimensions:

10x7.3x11.6cm
Weight:

0.3 kg
Tariff Code:

8537101190
Counliy of origin:

Germany
CPU designation:

1512SP F-1 PN
Host platform:

ET 200SP
Program work memory:

300 KB
Data work memory:

1 MB
Primary interface:

PROFINET IRT, 3-port switch
Bit performance:

48 ns
Rated supply:

24 V DC
Permitted supply range:

19.2–28.8 V DC
Rated current:

0.6 A
Maximum current:

0.9 A
Memory card:

Required; up to 32 GB
BusAdapter:

Required for ports 1 and 2
Firmware:

V2.9, functional status FS05
I&M data:

I&M0 through I&M3
Lifecycle:

Spare-part support phase

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

6ES7512-1SK01-0AB0 executes standard and fail-safe control tasks in a documented ET 200SP station, with the memory card, BusAdapter, PROFINET ports and safety project retained as one validated configuration.

6ES7512-1SK01-0AB0
1512SP F-1 PN
ET 200SP
300 KB

Retain the exact host position, connections and configuration record. Complete controlled diagnostics and a functional test before service release.

Important Notice: Confirm 6ES7512-1SK01-0AB0, every companion marking and the recorded acceptance result before replacement.

Siemens 6ES7512-1SK01-0AB0 Manuals & Downloads

Siemens 6ES7512-1SK01-0AB0 Technical Reference (PDF)Siemens 6ES7512-1SK01-0AB0 Official User Guide Excerpt (PDF)

The first PDF is an Apter Power technical reference; the second is a selected official manufacturer excerpt kept within ten pages for focused model verification.

Installed-system renewal

Restores the documented 6ES7512-1SK01-0AB0 position while keeping the approved host and interfaces.

Controlled maintenance

Supports as-found recording, safe isolation and exact connection restoration.

Compatibility review

Compares the full marking, host, connectors, settings and companion hardware.

Commissioning evidence

Records diagnostics and a controlled functional test of fail-safe CPU execution and PROFINET communication in an ET 200SP station.

Read the applicable product and site instructions before work. Verify 6ES7512-1SK01-0AB0, the installed host and every connected interface before isolation or replacement.

Confirm the complete 6ES7512-1SK01-0AB0 marking before work.

Place the affected equipment in its approved maintenance state.

Isolate connected energy and prove the circuit safe.

Photograph the slot, wiring, connectors and settings before removal.

Match every documented interface and companion component.

Restore mechanical retention, shielding and protective earth.

Review hardware, network and controller diagnostics after energization.

Functionally verify fail-safe CPU execution and PROFINET communication in an ET 200SP station before service release.

Technical notes

Match 6ES7512-1SK01-0AB0 to the complete installed record. Preserve the host position, connections, settings and companion hardware; after replacement, verify fail-safe CPU execution and PROFINET communication in an ET 200SP station under controlled conditions.

FAQ View All FAQ

What does 6ES7512-1SK01-0AB0 identify?

6ES7512-1SK01-0AB0 identifies the SIMATIC CPU 1512SP F-1 PN for fail-safe execution and PROFINET communication.
Which installed system must 6ES7512-1SK01-0AB0 match?

Match 6ES7512-1SK01-0AB0 to the recorded SIMATIC ET 200SP station, BusAdapter and companion hardware.
Which markings must be checked on 6ES7512-1SK01-0AB0?

Verify the complete 6ES7512-1SK01-0AB0 article number, functional status and firmware record.
What should be recorded before removing 6ES7512-1SK01-0AB0?

Record the station position, memory card, BusAdapter, wiring, project version, safety signature and diagnostics.

Can 6ES7512-1SK01-0AB0 be replaced by appearance alone?

No. 6ES7512-1SK01-0AB0 requires an exact article-number, hardware and project-configuration match.
How should 6ES7512-1SK01-0AB0 be isolated?

Use the approved safety and maintenance procedure, isolate power and prove the affected circuits safe.
What is checked after installing 6ES7512-1SK01-0AB0?

Check seating, supply, BusAdapter, memory card, project load, PROFINET devices, diagnostics and safety functions.
What releases 6ES7512-1SK01-0AB0 to service?

A recorded acceptance test must confirm fail-safe CPU execution and PROFINET communication without unexpected faults.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.