The Siemens 6DR5220-0EN00-0AA0 is a SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators. It converts a 4 to 20 mA command into controlled pneumatic actuator movement and returns diagnostic position information through HART communication.
- 4 to 20 mA with HART
- 2-, 3-, or 4-wire
- Double acting
- Polycarbonate
This double-acting, intrinsically safe configuration regulates control valves and rotary actuators while compensating for mechanical behavior through its commissioning and control functions.
Important Notice: Use the complete 6DR5220-0EN00-0AA0 code and verify the physical nameplate and current Siemens documentation before installation or replacement.
Apter Power 6DR5220-0EN00-0AA0 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
Control valves
Position a double-acting linear actuator from a 4 to 20 mA command.
Rotary process dampers
Regulate a part-turn pneumatic actuator.
Asset diagnostics
Use HART data for commissioning and maintenance insight.
Read and follow the exact Siemens documentation and host-equipment instructions before use. Verify 6DR5220-0EN00-0AA0 from the physical nameplate.
1
Verify hazardous-area certificate and loop parameters
2
Use clean, dry instrument air
3
Confirm double-acting pneumatic routing
4
Check NPT thread compatibility
5
Commission travel limits and direction before placing the valve in automatic control