Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for BCH2MM0813CA6C
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for BCH2MM0813CA6C
-
Manufacturer:Schneider Electric
-
Product Category:PLC Systems
-
Spare Part Number:BCH2MM0813CA6C
-
Estimated shipping dimensions:24.2x13.2x17.4cm
-
Weight:9.64 kg
-
Tariff Code:8537101190
-
Counliy of origin:France
-
Continuous power:850 W
-
Rated supply:220 V; single- or three-phase drive system
-
Nominal speed:1500 rpm
-
Maximum mechanical speed:3000 rpm
-
Nominal torque:5.39 N.m
-
Peak stall torque:13.8 N.m
-
Encoder:20-bit single-turn absolute
-
Shaft end:Keyed
-
Holding brake:Without brake
-
Shaft seal:Oil seal
-
Connector orientation:Straight connection
-
Motor standard:BCH2 range certified to EN/IEC 60034-1
Information
Overview
Manuals
Common Applications
Product Precautions
Schneider Electric BCH2MM0813CA6C provides 5.39 N.m nominal torque at 1500 rpm for a documented Lexium 28 or LXM26D axis.
- Retain the exact 0813CA6C mechanical and feedback execution.
- Match the motor to the documented 220 V drive rating.
- Keep the keyed shaft and oil-seal condition in the mechanical record.
- Do not infer a brake where the exact code specifies none.
The motor converts the servo drive command into controlled shaft motion and returns absolute position feedback through its 20-bit encoder. Drive tuning, motor current, feedback type and machine mechanics must be commissioned together.
Important Notice: Confirm the 220 V drive match, keyed shaft, no-brake execution, oil seal and 20-bit encoder before commissioning BCH2MM0813CA6C.
Schneider Electric BCH2MM0813CA6C Manuals & Downloads
Schneider Electric BCH2MM0813CA6C Technical Reference (PDF)Schneider Electric BCH2MM0813CA6C Official Manual Excerpt (PDF)The technical reference presents exact-model engineering data and maintenance boundaries. The official excerpt contains selected unchanged Schneider Electric source pages for this exact model or its documented product family.
Compact servo axis
Provides 850 W motion power for the validated machine axis.
Keyed mechanical transmission
Drives the load through the documented keyed shaft.
Oil-sealed shaft service
Uses the specified oil-seal execution where the machine requires it.
Lexium drive renewal
Restores the exact motor/drive/feedback combination.
Schneider Electric BCH2MM0813CA6C installation checks: verify exact identity, retain configuration evidence and record the complete functional acceptance.
1
Verify the complete Schneider Electric BCH2MM0813CA6C marking before any selection or field work.
2
Record the installed position, connectors, conductors and configuration assigned to BCH2MM0813CA6C.
3
Place the connected equipment in its approved safe state and isolate all relevant energy sources.
4
Protect the servo motor and its mating interfaces from contamination, static discharge and mechanical damage.
5
Secure the axis because BCH2MM0813CA6C is supplied without a holding brake.
6
Confirm the straight connector clearance and cable routing.
7
Check the 20-bit encoder selection in the drive configuration.
8
Prove direction, feedback and torque response before production release.
Technical notes
Confirm the 220 V drive match, keyed shaft, no-brake execution, oil seal and 20-bit encoder before commissioning BCH2MM0813CA6C.
FAQ View All FAQ
-
What continuous power rating is specified for Schneider Electric BCH2MM0813CA6C?The published BCH2MM0813CA6C value is 850 W. The installed configuration must remain within that boundary.
-
What rated supply rating is specified for Schneider Electric BCH2MM0813CA6C?For BCH2MM0813CA6C, the manufacturer states 220 V; single- or three-phase drive system. Do not replace it with a nearby suffix value.
-
What nominal speed rating is specified for Schneider Electric BCH2MM0813CA6C?Record 1500 rpm for BCH2MM0813CA6C and verify the field arrangement against the controlled drawing or project.
-
What maximum mechanical speed rating is specified for Schneider Electric BCH2MM0813CA6C?The exact-model source gives 3000 rpm. Use it together with the actual BCH2MM0813CA6C nameplate and installation record.
-
What nominal torque rating is specified for Schneider Electric BCH2MM0813CA6C?BCH2MM0813CA6C is documented with 5.39 N.m; this value belongs to the verified product configuration.
-
What peak stall torque rating is specified for Schneider Electric BCH2MM0813CA6C?Use 13.8 N.m as the BCH2MM0813CA6C peak stall torque reference and resolve any field discrepancy before release.
-
Which encoder configuration belongs to Schneider Electric BCH2MM0813CA6C?The manufacturer record for BCH2MM0813CA6C specifies 20-bit single-turn absolute. Preserve it through selection, installation and acceptance.
-
Which shaft end configuration belongs to Schneider Electric BCH2MM0813CA6C?Schneider Electric identifies the shaft end as Keyed; keep that exact entry in the BCH2MM0813CA6C record.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.