Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for VT-VSPA1-1-F10
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include VT-VSPA1-1-F10 and the visible revision or assembly identity in your enquiry. Keep the complete reference on the quotation.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered VT-VSPA1-1-F10 with the installed equipment and applicable Rexroth documentation.
Technical specifications for VT-VSPA1-1-F10
-
Manufacturer:Rexroth
-
Product Category:General Automation
-
Spare Part Number:VT-VSPA1-1-F10
-
Weight:0.1 kg
-
Tariff Code:8537101190
-
Nameplate material number:00033823
-
Nameplate revision:R09
-
Amplifier family:VT-VSPA1-1, component series 1X
-
Control application:Proportional pressure valve with one solenoid
-
Supply, series data:24 V DC (+40% / -5%)
-
Connector, series data:32-pole DIN 41612 card connector with front plate
-
Command inputs, series data:Voltage/current-selectable differential input and +9 V input
-
Ramp, series data:Separate upward and downward ramp adjustments
-
Indication:H2 ready-for-operation LED on front plate
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Rexroth VT-VSPA1-1-F10. For VT-VSPA1-1-F10, retain the existing valve pairing, command source and front-panel settings when exchanging the amplifier card.
Nameplate marking: VT-VSPA1-1-F10
Nameplate material number: 00033823
Nameplate revision: R09
Amplifier family: VT-VSPA1-1, component series 1X
Nameplate material number: 00033823
Nameplate revision: R09
Amplifier family: VT-VSPA1-1, component series 1X
The Rexroth 1X family document describes an amplifier for proportional pressure valves with one solenoid and no electrical position feedback. It gives the shared 24 V DC supply and 32-pole card-connector arrangement for VT-VSPA1-1.
The F10 card belongs to an installed hydraulic control loop. Match the valve, input-signal mode, DIL-switch positions and ramp settings to that loop before commissioning.
The F10 marking and revision remain part of the purchase identity. An adjacent VT-VSPA1-1 code should only be considered after a documented equipment-level comparison.
The F10 card belongs to an installed hydraulic control loop. Match the valve, input-signal mode, DIL-switch positions and ramp settings to that loop before commissioning.
The F10 marking and revision remain part of the purchase identity. An adjacent VT-VSPA1-1 code should only be considered after a documented equipment-level comparison.
Installed-system reference: VT-VSPA1-1 proportional-valve amplifier card. Match the F10 revision, valve and DIL-switch settings.
Technical downloads for Rexroth VT-VSPA1-1-F10: an original manufacturer technical excerpt and an Apter Power installation and commissioning guide.
-
Rexroth VT-VSPA1-1-F10 technical reference
Original manufacturer excerpt - PDF, 3 pages. VT-VSPA1-1 series 1X specifications and front-panel controls. -
Rexroth VT-VSPA1-1-F10 installation guide
Prepared by Apter Power - PDF, 5 pages. Installed-system review, configuration checks, commissioning and handover.
The Rexroth excerpt covers VT-VSPA1-1 series data; match the complete F10 nameplate and installed valve. The installation guide is prepared by Apter Power.
Hydraulic-system context: VT-VSPA1-1-F10 is a plug-in amplifier for a documented one-solenoid proportional pressure-valve circuit. The valve, rack connector and field wiring define the installation.
Application scope: Apply its command, ramp and ready functions after matching the F10/R09 marking and saved settings to the hydraulic loop.
Application scope: Apply its command, ramp and ready functions after matching the F10/R09 marking and saved settings to the hydraulic loop.
-
Pressure-valve control
The VT-VSPA1-1 series serves a one-solenoid proportional pressure valve without electrical position feedback. -
Card and supply fit
The documented series uses a 32-pole DIN 41612 card connector and 24 V DC supply. -
Command interface
Series data describes a selectable voltage/current differential command input and a +9 V input. -
Ramp control
Separate upward and downward ramp adjustments shape the valve command in the installed loop.
Installation and commissioning checks for Rexroth VT-VSPA1-1-F10.
Isolation
De-energize the card supply and hydraulic actuator control before removal.
Signal mode
Verify voltage/current input selection before energizing the replacement.
Valve match
Check the valve type and installed switch positions before transferring settings.
Supply
Verify the 24 V DC card supply and rack polarity before insertion.
Saved controls
Record the Gw maximum-command control and both ramp positions before removing the old card.
Functional test
Check H2 ready status, command tracking and valve response under the site procedure.
Alternative Names
VTVSPA11F10
Mannesmann Rexroth VT-VSPA1-1-F10
Rexroth VT-VSPA1-1-F10
Technical notes
Installation relationship: Match the complete F10 card marking and R09 revision with the installed hydraulic valve and rack before replacement.
Configuration: Set command-input mode, DIL switches, maximum command and ramp controls to the documented installation.
Technical reference: Mannesmann Rexroth Electrical Amplifiers VT-VSPA1-1 and VT-VSPA1K-1, RD 30 111/03.98.
FAQ View All FAQ
-
What is the function of VT-VSPA1-1-F10?It is a VT-VSPA1-1-family amplifier card for controlling a one-solenoid proportional pressure valve. Match the valve and settings to the installed system.
-
Which marking identifies the offered VT-VSPA1-1-F10?The supplied nameplate reads VT-VSPA1-1-F10, material number 00033823 and revision R09.
-
What supply does the VT-VSPA1-1 series specify for VT-VSPA1-1-F10?The Rexroth 1X series document specifies 24 V DC with a +40% / -5% operating tolerance; verify the installed supply and card marking before connection.
-
What connector arrangement is documented for the VT-VSPA1-1 family of VT-VSPA1-1-F10?The VT-VSPA1-1 form uses a 32-pole card connector and front plate. Check the rack slot, wiring and complete card marking.
-
How are pressure-valve command signals handled by VT-VSPA1-1-F10?The family document describes a differential command input selectable between voltage and current modes, plus an additional +9 V command input. Set the switches for the installed signal source.
-
What do the two front ramp controls on VT-VSPA1-1-F10 do?The VT-VSPA1-1 front panel has separate upward and downward ramp adjustments. Transfer the installed settings only after confirming the valve application.
-
What does the H2 indicator on VT-VSPA1-1-F10 represent?The H2 front LED indicates ready-for-operation status in the documented VT-VSPA1-1 arrangement; verify the input and solenoid circuit if it is not ready.
-
Can another VT-VSPA1-1 variant automatically replace VT-VSPA1-1-F10?No. Preserve the complete F10 marking, material number, card revision, valve pairing and switch configuration when choosing a replacement.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.