Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for MVI46-ADMNET
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Match the complete ProSoft Technology MVI46-ADMNET marking and installed configuration. Confirm MVI46-ADMNET hardware, executable and SLC mapping.
-
Check the offered item before ordering
Request available label and connector photos. Compare the offered MVI46-ADMNET with the installed hardware and applicable ProSoft Technology requirements.
Technical specifications for MVI46-ADMNET
-
Manufacturer:ProSoft
-
Product Category:PLC Systems
-
Spare Part Number:MVI46ADMNET
-
Weight:0.15 kg
-
Tariff Code:8537101190
-
Rack allocation:One SLC 1746 slot
-
Processor exchange:M0/M1 files with ladder interface
-
Ethernet interface:RJ45
-
Serial application ports:2
-
Serial electrical modes:RS-232 / RS-422 / RS-485, jumper-selected
-
Service port:CFG, RS-232
-
Backplane load:800 mA at 5 V DC
-
Operating temperature:0 to 60 °C
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- ProSoft Technology MVI46-ADMNET places custom communication logic beside the SLC processor, using rack data transfer and application-specific network handling as separate integration layers.
Integration focus: Rack and processor exchange
Service focus: Application and physical interfaces
Acceptance focus: Software continuity and diagnostics
Service focus: Application and physical interfaces
Acceptance focus: Software continuity and diagnostics
The module occupies a compatible SLC rack position and exchanges application data through M0/M1 files and associated ladder logic. It is intended for a local or supported extended rack, not an arbitrary remote I/O location. Record the rack position and processor interface logic before changing the communications application or hardware.
Custom applications are built for the module development environment. The CFG port supports service access, while the application ports and Ethernet interface serve configured external communications. Electrical serial modes require the appropriate hardware selection and wiring; changing a software protocol cannot correct a mismatched RS-232, RS-422 or RS-485 connection.
The installed application, its data map and the SLC ladder program together define useful operation. A link indicator proves only part of that path. Preserve the executable, source or service package and settings, then validate both successful transactions and loss-of-communication handling before returning the equipment to production.
Custom applications are built for the module development environment. The CFG port supports service access, while the application ports and Ethernet interface serve configured external communications. Electrical serial modes require the appropriate hardware selection and wiring; changing a software protocol cannot correct a mismatched RS-232, RS-422 or RS-485 connection.
The installed application, its data map and the SLC ladder program together define useful operation. A link indicator proves only part of that path. Preserve the executable, source or service package and settings, then validate both successful transactions and loss-of-communication handling before returning the equipment to production.
Controller platform reference: Allen-Bradley SLC 500 integration. Follow applicable installation instructions and approved design.
Technical and service documents for ProSoft Technology MVI46-ADMNET, separating original engineering information from installation and verification work.
MVI46-ADMNET Original Technical Excerpt
ADM Developer Guide, August 6, 2021. Selected original pages retain the applicable technical context. PDF · 6 pages.MVI46-ADMNET Installation & Verification Guide
Apter Power installation workbook covering preserve the custom application, qualify rack and ports, restore application transfer, validation and handover. PDF · 5 pages.
Original manufacturer pages retain their technical context. Use the Apter Power guide with the applicable manufacturer instructions and approved installation design.
System and supply context: ProSoft Technology MVI46-ADMNET forms the application development ethernet communication module part of the Allen-Bradley SLC 500 integration arrangement. Confirm MVI46-ADMNET hardware, executable and SLC mapping.
Application scope: These applications describe functional roles within that arrangement. The module; application software, cables and development tools only when itemized must be identified separately in the offered scope.
Application scope: These applications describe functional roles within that arrangement. The module; application software, cables and development tools only when itemized must be identified separately in the offered scope.
Custom Ethernet integration
Implement the required application protocol and validate the data exchange.Serial field-device gateway
Match electrical mode, protocol and port wiring to the connected equipment.SLC data-map integration
Coordinate M0/M1 exchange with the installed ladder program.Legacy application migration
Retain application assets and assess a replacement platform independently.
Prepare ProSoft Technology MVI46-ADMNET for its configured installation using these checks.
Preserve the custom application
Back up executable, settings and SLC data map before isolation.
Qualify rack and ports
Verify supported rack position, serial electrical selections and cable assignment.
Restore application transfer
Load the approved application and corresponding settings with the process secured.
Trace test transactions
Use known values to verify network handling and M0/M1 alignment.
Test loss and recovery
Interrupt test communications and verify timeout, stale-data and recovery behavior.
Configuration handover
Retain the final tested settings, physical connections and accepted response for MVI46-ADMNET.
Alternative Names
ProSoft Technology MVI46-ADMNET
Technical notes
Application ownership: The executable and matching processor interface are essential parts of the installed function.
Electrical mode: Serial jumpers and wiring must match the field interface before protocol diagnosis.
Stale-data response: Validate timeout and communication-loss handling as well as successful transfers.
FAQ View All FAQ
-
Why can Ethernet link be healthy while MVI46-ADMNET transfers no useful SLC data?Link state does not prove application transactions or the M0/M1 ladder exchange. Trace a known value through the network application and processor data map.
-
Can MVI46-ADMNET be installed in any remote SLC I/O location?No. Verify its supported local or extended-rack arrangement. A matching slot connector alone does not establish processor communication support.
-
What must be backed up before replacing MVI46-ADMNET?Retain the application executable, configuration, available development package and matching ladder/data map. Hardware replacement alone does not reconstruct a custom application.
-
Why can changing a protocol setting fail to restore a serial port on MVI46-ADMNET?The hardware electrical mode and wiring may not match the device. Verify jumpers, pin assignment and RS-232/422/485 selection separately from protocol settings.
-
How should data alignment be checked on MVI46-ADMNET?Transfer known patterns and compare word boundaries, ordering and values at both ends of the M0/M1 interface. Correct the data map before enabling process commands.
-
What distinguishes the CFG port from application ports on MVI46-ADMNET?CFG is used for service access; the application ports implement configured field communications. Confirm which connector is being tested before changing serial wiring.
-
Why must communication-loss behavior be tested with MVI46-ADMNET?A successful transaction does not prove safe handling of stale data. Interrupt the test connection under controlled conditions and verify application and PLC timeout responses.
-
Does discontinuation make another module a direct replacement for MVI46-ADMNET?No. The custom application and SLC interface must be assessed for migration. Verify platform fit and rebuild or adapt the application only through a qualified engineering review.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.