Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for MC-TAIH02 51304453-150
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for MC-TAIH02 51304453-150
-
Manufacturer:Honeywell
-
Product Category:DCS Systems
-
Spare Part Number:51304453-150
-
Estimated shipping dimensions:30.8x12.1x5cm
-
Weight:0.4 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
FTA type:HLAI/STI
-
Channels:16
-
Terminal type:Compression
-
Mounting size:A
-
Compliance version:Non-CE part
Information
Overview
Manuals
Common Applications
Product Precautions
Honeywell MC-TAIH02 51304453-150 is a field termination assembly for HLAI/STI signal wiring.
- HLAI/STI field termination
- Marshalling interface support
- Cabinet-side signal routing
- System-specific terminal integration
MC-TAIH02 routes compatible HLAI/STI field signals through the designated termination assembly. Maintain the approved channel mapping, terminal identification, shielding and marshalling arrangement, then verify the corresponding controller indications before restoring process service.
Important Notice: Confirm whether the matching I/O module, terminal assembly, cable set, field wiring and cabinet accessories required for MC-TAIH02 51304453-150 are included in the quotation or stock description.
Apter Power MC-TAIH02 Manuals and Guides
- Apter Power MC-TAIH02 Product Reference Manual
- Apter Power MC-TAIH02 Installation and Verification Reference
Important Notice: These are two separate Apter Power documents prepared from product-specific Honeywell technical information. Confirm the physical nameplate, current Honeywell documents and installed-system requirements before configuration or installation. They do not replace Honeywell manuals.
MC-TAIH02 installed-base replacement
Supports like-for-like maintenance of the documented HLAI/STI field termination assembly.
MC-TAIH02 compatibility review
Checks the host hardware, slot or mounting position, companion assembly, cable and revision before replacement.
MC-TAIH02 installation planning
Defines the required isolation, ESD, terminal, wiring and configuration checks before field work.
MC-TAIH02 commissioning
Supports controlled power, channel, communication, diagnostic and process-response checks after installation.
Read the applicable Honeywell instructions before work. Verify model MC-TAIH02, part number 51304453-150 and the installed-system configuration.
1
Verify model MC-TAIH02 and part number 51304453-150 on the physical label before use.
2
Use MC-TAIH02 with the exact Honeywell host, companion hardware, terminal assembly and field wiring specified for the installed system.
3
Match every MC-TAIH02 connector, terminal, cable and companion assembly before moving field wiring.
4
Back up the applicable controller, node, I/O or communication configuration before replacing MC-TAIH02.
5
Isolate energy before handling MC-TAIH02 unless the applicable hardware procedure explicitly permits energized service.
6
Follow ESD controls and protect MC-TAIH02 connectors and printed-circuit assemblies during handling.
7
Do not transfer channel, voltage, current, terminal or firmware values from a similar model to MC-TAIH02.
8
After installing MC-TAIH02, complete the relevant power, channel, link, diagnostic, alarm and fail-state checks.
Alternative Names
MC-TAIH02
51304453-150
Technical notes
Use MC-TAIH02 with the exact Honeywell host, companion hardware, terminal assembly and field wiring specified for the installed system.
FAQ View All FAQ
-
Which input service does MC-TAIH02 terminate?MC-TAIH02 is a 16-channel HLAI/STI field termination assembly with compression terminals.
-
Which field circuits should be checked before wiring MC-TAIH02?Verify each transmitter type, loop supply, signal range, shield, polarity and terminal number before moving wiring to MC-TAIH02.
-
How should analog channels be tested after installing MC-TAIH02?Inject controlled analog values and confirm scaling, channel quality, alarms and controller values for every wired MC-TAIH02 channel.
-
What fta type value applies to MC-TAIH02?For MC-TAIH02, the listed fta type value is HLAI/STI. Confirm the same marking and configuration on the installed unit before work.
-
What channels value applies to MC-TAIH02?For MC-TAIH02, the listed channels value is 16. Confirm the same marking and configuration on the installed unit before work.
-
What terminal type value applies to MC-TAIH02?For MC-TAIH02, the listed terminal type value is Compression. Confirm the same marking and configuration on the installed unit before work.
-
What mounting size value applies to MC-TAIH02?For MC-TAIH02, the listed mounting size value is A. Confirm the same marking and configuration on the installed unit before work.
-
What compliance version value applies to MC-TAIH02?For MC-TAIH02, the listed compliance version value is Non-CE part. Confirm the same marking and configuration on the installed unit before work.
-
Is MC-TAIH02 compatible with every Honeywell rack or chassis?No. Match MC-TAIH02 to the exact Honeywell host, rack or chassis, slot, companion hardware and project revision used by the installed system.
-
What installation checks are required for MC-TAIH02?Confirm isolation, ESD controls, slot or mounting position, connector orientation, terminal hardware, cable code and field wiring before installation.
-
Which fault information helps troubleshoot MC-TAIH02?Record MC-TAIH02 indicators, diagnostics, affected channels, field measurements, wiring checks, companion hardware and the sequence that produced the fault.
-
What information should an RFQ for MC-TAIH02 include?Include model MC-TAIH02, part number 51304453-150, quantity, revision, clear nameplate photos, host system and required terminal or companion hardware.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.