Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for IC698PSA350
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for IC698PSA350
-
Manufacturer:General Electric
-
Product Category:General Automation
-
Spare Part Number:IC698PSA350
-
Estimated shipping dimensions:6.3x18.5x29.1cm
-
Weight:2.02 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Platform:PACSystems RX7i
-
Supply type:AC/DC input power supply
-
Rated output power:350 W
-
AC input:120/240 Vac
-
DC input:125 Vdc
-
Output rails:Three DC channels
-
Cooling:Forced-air fan tray
-
Status indicators:FIELD OK; OUTPUT OK; OVER TEMP
Information
Overview
Manuals
Common Applications
Product Precautions
GE IC698PSA350 is a PACSystems RX7i 350 W AC/DC input power supply. It provides regulated rack power for the controller and installed I/O assembly.
- Feeds the RX7i rack from the selected AC or DC source
- Maintains the regulated DC rails used by the controller and I/O modules
- Reports field, output and over-temperature status through front indicators
- Supports high-capacity rack power planning for distributed control systems
IC698PSA350 installs with PACSystems RX7i rack, RX7i controller and I/O modules, Bottom-mounted fan tray, AC or 125 Vdc field supply in an engineered PACSystems RX7i power supplies configuration.
The commissioning workflow covers installed-hardware matching, controlled start-up and functional verification for this pacsystems rx7i 350 w ac/dc input power supply.
Important Notice: Confirm the complete IC698PSA350 marking, installed-system configuration, field connections and controlled functional test before commissioning or replacement.
Apter Power IC698PSA350 Manuals and Guides
Apter Power IC698PSA350 RX7i Power-Supply Technical BriefApter Power IC698PSA350 Rack Installation & Commissioning Workbook
The first document is an Apter Power model-specific technical reference. The second supports model-specific installation, configuration and engineering verification.
RX7i high-capacity rack power distributionFeeds the RX7i rack from the selected AC or DC source
Redundant controller and I/O cabinet power planningMaintains the regulated DC rails used by the controller and I/O modules
Process-control cabinet refurbishmentReports field, output and over-temperature status through front indicators
High-I/O-count machine control panelsSupports high-capacity rack power planning for distributed control systems
Read the applicable GE installation instructions before work. Verify IC698PSA350 and the installed PACSystems RX7i power supplies configuration.
1Verify the complete IC698PSA350 suffix and the rack power budget before replacement.
2Isolate the selected AC or DC source and rack energy before removing the supply.
3Confirm the fan tray is installed and its airflow path is unobstructed.
4Check input wiring polarity and protective devices against the approved cabinet drawing.
5Use ESD controls at the rack connector and protect the keyed guides.
6Record FIELD OK, OUTPUT OK and OVER TEMP indications before service.
7Restore rack power only after all module connectors and retaining hardware are seated.
8Run a controlled load and diagnostic check before releasing the rack to production.
Technical notes
Mount IC698PSA350 in the documented RX7i rack position and verify fan-tray airflow, source selection and status LEDs before loading the control project.
FAQ View All FAQ
-
Which rack is IC698PSA350 designed to power?IC698PSA350 is specified for the PACSystems RX7i rack power arrangement; confirm the installed rack and source wiring before fitting it.
-
What input sources are identified for IC698PSA350?The product data identifies 120/240 Vac and 125 Vdc input selections for this supply.
-
Why is the fan tray important for IC698PSA350?The 350 W supply uses forced-air cooling, so the documented fan tray and unobstructed airflow path must be present during operation.
-
What do the IC698PSA350 front indicators show?FIELD OK indicates acceptable field input, OUTPUT OK indicates the DC channels are operating, and OVER TEMP indicates a thermal or airflow condition.
-
How should engineers verify IC698PSA350 replacement wiring?Record the source selection, protective devices and rack connector positions, then compare each conductor with the approved RX7i cabinet drawing before energizing.
-
Can IC698PSA350 be commissioned under load immediately?Apply power in a controlled maintenance state, confirm all three status indications and then test the rack load and controller diagnostics before production release.
-
What should be recorded before removing IC698PSA350?Record the complete catalog marking, rack position, input selection, fan-tray condition and the pre-removal LED state.
-
What confirms an IC698PSA350 installation is complete?A seated supply, verified airflow, correct source wiring, normal indicators and a successful rack diagnostic and load test complete the installation check.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.