Which installed system position is intended for IC698CRE030?

Install IC698CRE030 only in the documented GE PACSystems RX7i redundancy control position and compare the complete catalog marking with the approved hardware list.

What field signals or controlled function does IC698CRE030 handle?

Its documented role is redundant plc execution, ethernet data and serial communications; preserve the assigned channel, network or controller function during service.

Which companion hardware must be matched to IC698CRE030?

Match IC698CRE030 with RX7i VME64 rack and redundancy partner CPU, including the documented rack, cable and project identity.

Which electrical rating must be checked before wiring IC698CRE030?

Verify user memory: 64 MB battery-backed RAM. Do not transfer limits from another catalog number.

What configuration should be recorded before replacing IC698CRE030?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved GE PACSystems RX7i redundancy control configuration.

Which isolation and handling controls apply to IC698CRE030?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling IC698CRE030.

How should an engineer commission IC698CRE030?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended hot-standby process control function.

Can IC698CRE030 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

General Electric IC698CRE030 PACSystems RX7i 600 MHz redundant CPU

Name: IC698CRE030
Brand: General Electric
SKU: IC698CRE030

IC698CRE030

PACSystems RX7i 600 MHz redundant CPU

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for IC698CRE030

Manufacturer:

General Electric

Product Category:

PLC Systems

Spare Part Number:

IC698CRE030

Estimated shipping dimensions:

4.1x17.4x29.3cm

Weight:

0.8 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Processor:

Pentium M at 600 MHz

User memory:

64 MB battery-backed RAM

Flash user memory:

64 MB nonvolatile

Ethernet:

Embedded 10/100 Mbit/s

Serial ports:

Serial protocols:

Modbus RTU slave; SNP; Serial I/O

Program blocks:

Up to 512

Operating temperature:

0 to 50 degC without fan; 0 to 60 degC with fan tray

Information

Overview Manuals Common Applications Product Precautions

General Electric IC698CRE030 is pacsystems rx7i 600 mhz redundant cpu. It executes PACSystems RX7i control logic as a redundancy CPU with embedded Ethernet and serial communications.

Uses a 600 MHz Pentium M processor
Provides 64 MB battery-backed user memory
Provides 64 MB nonvolatile flash memory
Integrates ten/one-hundred-megabit Ethernet

IC698CRE030 operates with RX7i VME64 rack, redundancy partner CPU, compatible redundancy links, Proficy Machine Edition project.

Engineered applications include Hot-standby process control, High-capacity RX7i logic, Ethernet EGD coordination, Redundant CPU replacement.

Important Notice: Back up the project, record primary/secondary roles, Ethernet and serial settings, battery state and firmware, then prove synchronization before switchover.

Apter Power GE IC698CRE030 Manuals and Guides

Apter Power GE IC698CRE030 Product and System Technical Reference PDF Apter Power GE IC698CRE030 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Hot-standby process control

Executes the redundant process application.

High-capacity RX7i logic

Synchronizes controller state with its partner.

Ethernet EGD coordination

Exchanges Ethernet Global Data and service traffic.

Redundant CPU replacement

Restores the CPU while preserving redundancy roles.

Read the applicable General Electric instructions before work. Verify IC698CRE030 and the installed GE PACSystems RX7i redundancy control configuration.

Verify the complete IC698CRE030 marking and its assigned GE PACSystems RX7i redundancy control position before work.

Place the connected hot-standby process control process in the approved maintenance state.

Isolate applicable power and redundant plc execution, ethernet data and serial communications field energy before disconnecting conductors.

Record connector, conductor, address, firmware and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed RX7i VME64 rack and redundancy partner CPU against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended high-capacity rx7i logic function and retain the final test result.

FAQS

Which installed system position is intended for IC698CRE030?

Install IC698CRE030 only in the documented GE PACSystems RX7i redundancy control position and compare the complete catalog marking with the approved hardware list.
What field signals or controlled function does IC698CRE030 handle?

Its documented role is redundant plc execution, ethernet data and serial communications; preserve the assigned channel, network or controller function during service.
Which companion hardware must be matched to IC698CRE030?

Match IC698CRE030 with RX7i VME64 rack and redundancy partner CPU, including the documented rack, cable and project identity.
Which electrical rating must be checked before wiring IC698CRE030?

Verify user memory: 64 MB battery-backed RAM. Do not transfer limits from another catalog number.
What configuration should be recorded before replacing IC698CRE030?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved GE PACSystems RX7i redundancy control configuration.
Which isolation and handling controls apply to IC698CRE030?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling IC698CRE030.
How should an engineer commission IC698CRE030?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended hot-standby process control function.
Can IC698CRE030 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

IC698CRE030

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for IC698CRE030

Technical specifications for IC698CRE030

Information

Information