Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for IS200SRLYH2AAA
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for IS200SRLYH2AAA
-
Manufacturer:General Electric
-
Product Category:Gas Turbine Control
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Board family:IS200SRLYH2A
-
Associated I/O pack:IS220PDOAH1B
-
DC output voltages:24 / 48 / 125 V DC nominal
-
DC output current:5 / 1.2 / 0.6 A maximum
-
AC output voltages:120 / 240 V AC nominal
-
AC output current:5 A maximum
-
Interface role:Relay output field termination
-
System family:Mark VIe discrete output
Information
Overview
Manuals
Common Applications
Product Precautions
GE IS200SRLYH2AAA provides relay-output field termination for a documented Mark VIe discrete-output position.
- SRLYH2A relay-output architecture
- IS220PDOAH1B pack association
- AC and DC contact ratings
- Terminal-board identity must be retained
The board carries field output circuits associated with an IS220PDOAH1B pack. Replacement work must preserve the exact terminal identity, output assignments, load voltage and protective arrangement recorded for the installed panel.
Important Notice: The manufacturer manual confirms the IS200SRLYH2A base family; preserve the complete IS200SRLYH2AAA marking from the supplied order identity and do not infer suffix equivalence.
GE IS200SRLYH2AAA Manuals & Downloads
GE IS200SRLYH2AAA Manufacturer Manual Excerpt (PDF)GE IS200SRLYH2AAA Installation & Commissioning Guide (PDF) The manufacturer excerpt contains selected unchanged official pages. The installation guide organizes identification, preparation, restoration and witnessed acceptance.
Relay load switching
Terminates documented AC or DC relay-output circuits within the published contact ratings.
Mark VIe output renewal
Restores the terminal board paired with an IS220PDOAH1B output pack.
Panel wiring retention
Keeps conductor identity and relay assignments tied to the cabinet drawing.
Controlled maintenance
Supports like-for-like service after the installed load and protection scheme are recorded.
GE IS200SRLYH2AAA installation checks: preserve the exact identity, installed configuration and witnessed acceptance record throughout the work.
1
Confirm the complete IS200SRLYH2AAA marking before removal.
2
Identify the associated IS220PDOAH1B pack and terminal position.
3
Isolate control power and every switched field source.
4
Record each relay output, conductor, load voltage and protective device.
5
Verify that every connected load remains within the published contact rating.
6
Protect board contacts and relay circuits from contamination and ESD.
7
Restore one labeled field circuit at a time against the approved drawing.
8
Prove each relay command and field response before returning the unit to service.
Technical notes
For IS200SRLYH2AAA, retain the exact manufacturer identity, installed configuration and source revision. Return the equipment to service only after the documented diagnostics and model-specific field response are witnessed.
FAQ View All FAQ
-
Which I/O pack is officially associated with GE IS200SRLYH2AAA?The official equipment guide lists the IS200SRLYH2A terminal-board family with the IS220PDOAH1B discrete output pack.
-
What field role does GE IS200SRLYH2AAA perform?It provides relay-output field termination for the associated Mark VIe discrete output pack.
-
Which DC contact voltages are documented for GE IS200SRLYH2AAA?The SRLYH2A family contact table lists 24, 48 and 125 V DC nominal operation.
-
What DC current limits apply to GE IS200SRLYH2AAA?The corresponding maximum currents are 5 A at 24 V DC, 1.2 A at 48 V DC and 0.6 A at 125 V DC.
-
Which AC ratings are listed for GE IS200SRLYH2AAA?The official table lists 120 and 240 V AC nominal contact outputs with a 5 A maximum current.
-
Why must every field source be isolated before handling GE IS200SRLYH2AAA?The terminal board can carry separately supplied AC or DC load circuits even when rack power is removed.
-
What must be recorded before replacing GE IS200SRLYH2AAA?Record the full identifier, board position, pack association, conductor labels, load voltages and protective devices.
-
How is GE IS200SRLYH2AAA commissioned after replacement?Command each documented relay output and witness the intended field response while checking diagnostics and contact loading.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.