Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for IC697ALG320
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for IC697ALG320
-
Manufacturer:General Electric
-
Product Category:PLC Systems
-
Spare Part Number:IC697ALG320
-
Estimated shipping dimensions:4x22x29.3cm
-
Weight:0.66 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Analog output signal:GE Series 90-70
-
Current Output Range:GFK-2793 - exact revision required
-
Conversion rate:HOLD pending official model page or manual
-
Analog output resolution:HOLD pending exact wiring table and project design
Information
Overview
Manuals
Common Applications
Product Precautions
General Electric IC697ALG320 is an evidence-bounded Series 90-70 analog-module migration reference. The exact IC697ALG320 label is preserved in the existing ApterPower record. Emerson's official conversion material identifies GFK-2793 as the detailed Series 90-70-to-RX3i I/O migration reference, while the cited public brochure does not itself provide exact IC697ALG320 ratings.
- Exact requested label: IC697ALG320
- Legacy platform: GE Series 90-70
- Migration document: GFK-2793 - exact revision required
- Exact channels / ranges / resolution: HOLD pending official model page or manual
System role: Use this page to verify the installed Series 90-70 module and plan a controlled migration using the exact GFK-2793 wiring conversion for the site. Only facts stated by the cited manufacturer sources are published; sibling, predecessor and successor data are not transferred. Architecture boundary: Emerson's Conversion Rack passes Series 90-70 field wiring into RX3i with model-specific conversion configurations and explicitly requires pre-engineered wiring verification. Exact revision, firmware, host, connector and field-wiring details must be checked against the physical unit and approved project documentation. For maintenance, replacement or migration work, verify the complete nameplate, companion hardware, wiring, configuration and commissioning procedure before returning equipment to service. Origin, HS code, dimensions and logistics weight remain unpublished without exact manufacturer model-level evidence.
Important Notice: Verify IC697ALG320, the exact GFK-2793 revision, terminal mapping, replacement module and conversion drawing before migration or service.
Apter Power IC697ALG320 Label Verification Manuals and Guides
- IC697ALG320 Label Verification Product Parameters PDF
- Apter Power IC697ALG320 Label Verification Product Information Manual
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited General Electric official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current General Electric documents, and host-system requirements before installation or replacement.
Installed-base maintenance
Supports evidence-led identification and replacement planning for General Electric IC697ALG320.
System documentation
Provides a source-traceable boundary for the documented host, I/O, communication or termination role.
Commissioning review
Guides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessment
Separates exact-model facts from suffix, sibling, predecessor, successor and family-level information.
Read and follow the exact General Electric documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1
Verify IC697ALG320, the exact GFK-2793 revision, terminal mapping, replacement module and conversion drawing before migration or service.
2
Do not publish voltage/current ranges, resolution or IC695ALG704/708 replacement claims without the exact official GFK-2793 revision and project conversion drawing.
3
De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4
Back up controller, network, I/O and configuration data before replacement, migration or firmware work.
5
Verify every companion module, cable, connector, termination and power source from approved drawings.
6
Do not copy electrical, communication, mechanical or lifecycle values from a related model, suffix or successor.
7
Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8
Origin, HS code, dimensions and logistics weight remain unpublished without exact manufacturer model-level evidence.
Alternative Names
IC697ALG320
Technical notes
Verify IC697ALG320, the exact GFK-2793 revision, terminal mapping, replacement module and conversion drawing before migration or service.
Do not publish voltage/current ranges, resolution or IC695ALG704/708 replacement claims without the exact official GFK-2793 revision and project conversion drawing.
Origin, HS code, dimensions and logistics weight remain unpublished without exact manufacturer model-level evidence.
Lifecycle evidence boundary: EXACT_ITEM_PHASE_UNPUBLISHED
FAQ View All FAQ
-
What is General Electric IC697ALG320?It is an evidence-bounded Series 90-70 analog-module migration reference; this page is limited to the cited manufacturer-source boundary.
-
Is the exact identity verified?Verified Exact Model In Migration Context Technical Ratings Hold.
-
What is its documented role?Use this page to verify the installed Series 90-70 module and plan a controlled migration using the exact GFK-2793 wiring conversion for the site.
-
Are suffixes or related models automatic substitutes?No. Revision suffixes, sibling models, predecessor and successor products must be verified separately.
-
Must the physical nameplate be checked?Yes. Verify the full model, suffix, revision and every supplied order or drawing number.
-
Can family specifications be copied to this exact item?No. Family context is not permission to publish unverified exact-item parameters.
-
Are cables and termination hardware universal?No. Use only the exact companion hardware approved for the installed configuration.
-
Can it be changed while energized?No hot-swap claim is made; follow the manufacturer's and site's isolation procedures.
-
What must be tested after installation?Verify power, wiring, communication or I/O behavior, diagnostics, alarms and fail-state response.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.